used METALLKRAFT for sale

BRAND: METALLKRAFT YEAR: 2017 MODEL: HTBS-T 3100-60 APPLICATION TYPE: SHEARING LOCATION: GERMANY MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3700 MM MEASUREMENTS DEPTH: 4110 MM MEASUREMENTS HEIGHT: 2100 MM MACHINE WEIGHT: 7650 KG CONTROL UNIT MODEL: DT 7 TABLE OUTER LENGTH: 3515 MM OUTER WIDTH: 865 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MOTORISED BACKGAUGE: 1000 MM - ONE SIDE FENCE : 1500 MM - TWO SHEET SUPPORT ARMS 1000 MM (FROM 4 M MACHINES THREE SHEET SUPPORT ARMS) MOBILE FOOT SWITCH WITH EMERGENCY STOP BUTTON - HYDRAULIC OIL - SPLIT FINGER GUARD: 1000MM - WORKING WIDTH: 3100 MM - BACKGAUGE SPEED: 120 MM/S QUALITATIVE MACHINE BENEFITS: - ERGONOMICALLY ARRANGED, SWIVELLING OPERATING PANEL - OPERATION VIA MOBILE FOOT SWITCH WITH EMERGENCY STO ...

BRAND: METALLKRAFT YEAR: 2017 MODEL: GBPR30540-100 APPLICATION TYPE: BENDING LOCATION: GERMANY MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: DT-10 MAIN DRIVE PRESSING FORCE: 1000 KN MOVEMENT X-AXIS MOVEMENT: 650 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - GUIDED ON LINEAR RAILS AND DRIVEN BY BACKLASH-FREE BALL SCREWS (FROM GBP-R 4050-400 X-AXIS 750MM) - MANUAL R-AXIS, - HEIGHT ADJUSTMENT OF THE BACKGAUGE FINGERS VIA HANDWHEELS - POSITIONING OF THE UPPER BEAM WITH A RESOLUTION OF 0. 01MM - ATERAL UPRIGHT DEFLECTION - MANUAL TABLE CROWNING WITH COUNTER - COMPLETE SET OF REHFUSS UPPER TOOL - COMPLETE SET OF 4-FOLD DIES WITH V-OPENINGS 16, 22, 35, 50 MM - SOLID, LOW-MAINTENANCE QUADRUPLE GUIDE OF THE UPPER BEAM - HIGH-QUALITY HYDRAULIC COMPONENTS (BOSCH/REXROTH, HYDAC, ATOS ...

General: Year of construction 2019 Spindle speed 1,450 rpm Travel speed table 5 – 25 m/min Largest grinding wheel 355 x 38 x 127 mm Distance spindle – table max. 500 mm Clamping surface 300 x 600 mm Automatic feed control AD5

General: Year of construction 2019 Spindle speed 1,450 rpm Clamping surface 300 x 600 mm Largest grinding wheel 355 x 38 x 127 mm Travel speed table 5 – 25 m/min Distance between spindle and table 500 mm Weight 1.700 kg Other equipment and accessories included: Automatic feed control AD5 Coolant device Hydraulic

thread dia.: M6 - M36 mm turning speeds: 156 U/min radius: 1200 mm angle adjustable from - to: 0 - 90 Grad weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. ...

sheet width: 1050 mm plate thickness: 1 mm distance between columns: 1000 mm weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,16 x 0,93 x 0,73 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mm roll diameter: 62 mm throat: 100 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 560 x 220 x 500 mm - motor-driven beading machine - Various beading rollers - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2450 mm cutting width: 250 mm cutting speed: 40 / 80 m/min dimensions of saw-band: 2450 x 27 x 0,9 mm : 100 mm : 90 mm : 90 x 90 mm : 160 mm : 160 x 110 mm : 250 x 190 mm total power requirement: 0,75 / 1,1 kW table height: 925 mm weight of the machine ca.: 218 kg dimensions of the machine ca.: 1300 x 700 x 1530 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mm saw band length: 2980 mm cutting width: 320 mm dimensions of saw-band: 2980 x 27 x 0,9 mm band speed: 35 / 70 m/min table height: 940 mm capacity 90 degrees: round: 290 mm capacity 90 degrees: flat: 320x290 mm capacity 45 degrees: round: 240 mm capacity 45 degrees: flat: re. 240x150 / li. 240x100 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 150x180 mm total connected load: 2,6 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 1800 x 1050 x 1950 mm semi-automatic band saw Furnishing: - Micro dosing system - 3000 mm feed roller conveyor - Coolant gun for cleaning the machine - Miter cut from 45° right - 60° left - automatic vice clamping + vice opening - automatic saw cut + automatic raising saw bracket The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 40 mm square edge steel: 40 mm L-beam: 120 x 120 x 10 mm pressure: 55 t engine output: 5,5 kW weight of the machine ca.: 1250 kg dimensions of the machine ca.: 1650 x 1100 x 1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 50 mm roll diam. toproll: 155 mm roll diam. bottom roll: 155 mm total power requirement: 1,5 kW dimensions of the machine ca.: 1000x750x1400 mm weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...

Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.

Cutting diameter: 290mm, cutting width 320mm, saw blade length: 3100mm, saw blade dimensions X/Y/Z: 3100mm/27mm/0.9mm, miter cuts min./max.: -60°/+60°, cutting speed: 20m/min - 100m/min. Weight: approx. 570kg, dimensions X/Y/Z: approx. 1800mm/950mm/2100mm. An on-site inspection is possible.

Description: Belt width 80 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 60 kg

Description: Width of belt 80 mm Motor 2-stage Collection bag must be replaced With replacement belts Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 50 kg

Hydraulic punching machine for holes / beans, type: hls-55 metallkraft 2008. The machine is in very good technical condition - like new. - pressure 55 tons - max diameter of punched holes fi 40x10mm, fi 20x20mm - engine power 5.5 kW - weight 1300 kg We add several sets to the machine. punches and dies for cutting holes / beans.