used MIKRON for sale

used milling machine Mikron WF31D Control Heidenhain TNC355 electric handwheel Spindle speed 4000 rpm Feed rate 2-3000 mm/min Adapter SK40 Vertical milling head removable Documentation Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved. Mechanische Werkstätte Höbbelmann GmbH Niederkasseler Str. 3a 51147 Cologne Phone: 02203/83584 eMail: hoebbelmannt-online.de

Inv. Num. : 7356 Type: WF 21 D Producer: Mikron Generated: Parameters: Control system: Heidenhein TNC 355 Work table length: 800 mm Work table width: 460 mm X-axis travel: 450 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Control : Heidenhain TNC 355 Travel X - Path 560 mm Y - Path 500 mm Z - Path 400 mm Table 900 x 460 mm Spindle speeds 40 - 4000 rpm. Spindle holder SK 40 Drive power 8 kw Weight 2900 kg

Description Digital display, route and position control HEIDENHAIN specifications: Traverse path x/Y/Z 400/410/400 mm Table size 800 x 450 mm Speed of 30 RPM/2240 Feed 1-750 mm / Rev Rapid traverse 2000 mm / min Toolholder SK 40

Description Feeds in all 3 axes adjustable Digital display, route and position control HEIDENHAIN TNC technical data: Traverse path X / Y / Z 500 / 500 / 400 mm Speed range 30-2240 Rev/min Spindle speeds 24 Feed range 1 750 mm / min Rapid traverse in all feed directions 1500 mm / min Size 450 x 800 mm Weight approx. 1400 kg

Description Accessories available Technical data: Procedures Route x 500 mm Y way 500 mm Z way 380 mm Table size 350 x 800 mm Speed 50-2240 Rev/min Machine dimensions approx. 1.8 x 1.8 x 1.7 m Weight approx. 1650 kg

used milling machine Mikron WF32D with rotary table (4th axis) Control Heidenhain TNC415 electric handwheel Year of construction 1994 Switch-on hours 16000 h approx. 3000 kg Dimensions 2100x800x2600x1950 mm Prices plus currently valid VAT (domestic) The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.

WE OFFER AN BRAND NEW MACHINE, MACHINE WAS NEWR USED FOR WORK ATTACHED PHOTOS MACHINE IS AWAILIBLE IMEDIATELY

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

Gear hobbing machine MIKRON 102 Max. workpiece diameter 120 mm Max. Modul 2 Max. lenght of teeth 130 mm Min./max.nr of teeth 6 – 325 Angle on helical gears 0 – 90 °

used milling machine Mikron WF31D Control Heidenhain TNC407 Built in 1998 Switch-on hours 8000 h Spindle speed 4000 rpm Feed rate 2-3000 mm/min Adapter SK40 Removable vertical head Prices plus currently valid VAT (domestic) The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.

MIKRON UCP 600 VARIO machining center TECHNICAL CHARACTERISTICS: Year: 2006 CN Type: HEIDENHAIN iTNC 530 Number of continuous axes: 5 X-axis travel: 600 [mm] Y-axis travel: 450 [mm] Z-axis travel: 450 [mm] Table length: 325 [mm] Table width: 325 [mm] Max. weight Permissible on the table: 200 [Kg] Table area Ø: 450 [mm] Pin Attachment: HSK-A 63 Minimum speed. Spindle: 100 [RPM] Max. speed Spindle: 20000 [RPM] Spindle power: 13.5 [kW] Number of tool magazine stations: 120 Max. length Tool Size: 250 [mm] Max. weight per tool: 6 [Kg] Max. diameter Tool Size: 125 [mm] Supply voltage: 400 [V] Machine Weight: 7700 [Kg] Tool changer weight: 800 [Kg] Palletizer weight: 1200 [Kg] Visible machine under power for testing at our premises, by appointment. Price excl. VAT on request, truck loading included. Possibility of shipping throughout France as well as intern ...

Vertical machining center Manufacturer: Mikron Type: UCP 600 Year of construction: 2007 Control: Heidenhain ITNC 530 Axles: 5 Travel X: 530 mm Y: 450 mm Z: 450 mm Tool changer: 30 places HSK 63 Speed: 20,000 rpm Drive power: 40% ED 30 KW Chip Conveyor: Yes Internal Coolant Supply: Yes Weight: approx. 7500 kg -Probe - Blumlaser - ICC with paper belt filter 700 liters -Conveyor - Rotary table Ø 400 mm - Spindle cooling Errors and prior sale excepted.

MIKRON 122.01 Gear hobbing machine Max. hobbing Ø straight/helical wheels 40 mm Max. hobbing length 40 mm Number of teeth 2 - 400 Max. module 1 Speed of the mill 250 – 2000 rpm Feed : 0.05 - 0.8 mm/R Helix pitch 15 - 2437 mm Helix angle to the right or to the left 0 - 90° Collet type W12 Weight 280 kg

Article number: 07-07-171 Manufacturer: Mikron Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1700x1800x1800mm Weight: approx. 1500kg Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 500mm Y-axis: approx. 500mm Z-axis: approx. 380mm Table clamping surface: approx. 700x500mm Spindle: Speed range: approx. 50-2240 rpm Tool holder: ISO 40 Drive power: approx. 3.5kW Feeds & rapid traverses: in all 3 axes Feed range: approx. 1-630mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Angle milling head with drill quill  Coolant device  Complete documentation  Various tension wrenches  Work light  Various tool holders Other accessories on request Price and other technical data on re ...

Article number: 27-04-007 Manufacturer: Mikron Table Very good general condition suitable for: Maho MH 800 & MH 1000 Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 900x600x500mm Weight: approx. 300kg Table clamping surface: approx. 900x550mm T-slots clamping surface: Quantity: 6 pieces Size: 18mm Distance between T-slots: approx. 3x90mm Other accessories on request Price and other technical data on request

Article number: 27-04-005 Manufacturer: Mikron Table Very good general condition suitable for: Mikron UWF 801 & UWF 802 Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: ca.840x500x500mm Weight: approx. 200kg Table clamping surface: approx. 840x440mm T-slots clamping surface: Quantity: 6 pieces Size: 14mm Bore spacing (screw-on surface): approx. 2x120mm Other accessories on request Price and other technical data on request

Vertical Machining Center Manufacturer / Brand: MIKRON Type: VCE 1000 Pro Year of construction /YOM : 2009 Steuer / control : Heidenhain 530 i TNC Power on time : 35000 h Spindle running time : approx. 6000 h Available : Feb/ March 2024 Technische Daten / Technical Data X-axis / X-travel : 1020 mm Y-axis / Y-travel : 560mm Z-axis / Z-travel. : 600mm Max. Distance between table and spindle-nose : 775 mm Table dimension / table-size : 1020 x 620 mm max. table load : 1000 kg Tool holder / spindle taper : ISO 40 spindle turning speed range max. 14,000 rpm Feed stepless : 24 / 24 / 20 mm/min rapid traverse : 24 / 24 / 20 m/min Spindle motor : 16 kW Tool changer: 24 Pos. Maschinenweight / weight of the machine 6 t Dimensions of the machine : 2860 x 2600 x 2700 m Further equipment features / Additional information - Handrad / electrical hand wheel - Lots of  ...

Machining center vertical MILL P 500 U Manufacturer: Mikron Year: 2018 Control Heidenhain ... TNC 640 Clamping table surface ... 350x350mm Axis X ... 500mm Axis Y ... 600mm Axis Z ... 450mm Spindle speed ... 10-20000 rpm controlled axes ... 5 IKZ ... 80bar HSK-A63 Table latch ... 200kg Axis A ... +91/-121° Axis C ... 360° Plate change ... 7 Magazine places... 120 Machine weight... 13000kg L x W x H ... 4280x3920x3340mm The machine is in good condition, possible to test under electricity.

No. 4614: 1 used Universal milling machine make MIkRON, type WF 31 SA, with HEIDENHAIN TNC 114 work range: 560 x 500 x 400 m Accessories: rigid angle table SK 40 Coolant system Other: Speed range 40-4000 RPM Weight 2450 kg

Feed drive Infinitely adjustable Electronic handwheel can be switched to 3-axis Hydr. Tool tension rigid angular table: 900 x 530mm Central lubrication automatically Vertical milling head Pinole vertically extendable 90mm stroke Chip catch bowl Coolant device Documentation Geometric acceptance protocol similar to DIN 8615 Speed geom. graded: 21 Speed range vertical/horizontal: 40-400 min-1 Tool holder: SK 40 DIN 2080 Weight: approx.2.300 kg Table load: 500 kg Painting: RAL 6011 green Dimensions: approx. 2.20 m x 2.20 m x 2.10 m Test log attached

Machine Details Stock-No. 1105-03923 Type of machine Machining Center - Vertical Make MIKRON Type VCE 1000 Pro Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin Switzerland Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details x-travel 1015 mm Y-Travel 508 mm Z-Travel 675 mm CNC-control Heidenhain iTNC 530 max. distance between table and spindle-nose 775 mm table-size 1020 x 620 mm max. table load 1000 kg spindle taper ISO 40 spindle turning speed range max. 14,000 rpm Feed stepless 24 / 24 / 20 mm/min Rapid Traverse 24 / 24 / 20 m/min drive capacity - spindle motor 18 kW tool change unit 24 Pos. voltage 400 V total power requirement 35 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 2.86 x 2.60 x 2.70 m Additional information MIKRON VCE 1000 PRO - 3-D Measuring butt ...

Machine Details Stock number 1105-03802 Machine type machining center - vertical Brand MIKRON Type VCP 600 Year of construction 2010 Control type CNC Control heidenhain 430 Storage location FRANCE Country of origin SWITZERLAND Delivery time ready for shipment Freight Base EX WORK Technical details x-travel 600 mm y-travel 450 mm z-travel 450 mm Control heidenhain 430 Table clamping surface 850 x 530 mm Table load 0.40 t Number of T-slots 6 T-slots - distance 63 mm T-slots - width 14H12 mm Spindle speeds - infinitely variable 100 - 20,000 rpm Spindle motor 12,00 kW Tool holder HSK-A63 Tool changing device 30 Tool diameter 90 mm Tool diameter with 2 free spaces 110 mm Tool length - max. 250 mm Tool weight max. 6.00 kg Chip-to-chip time approx. 7.00 sec Feed infinitely variable 0 - 22,000 mm/min Rapid traverse 22.00 m/min Feed force X/Y/Z axis 5000 N Tota ...

Table clamping surface: 500 x 1000 mm stroke x: 630 mm traverse path y: 500 mm traverse path z: 460 mm Quill stroke: hand 45 mm spindle retainer: ISA 40 spindle speeds: 31.5-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse: x/y 6 / z 4 m/min. Supply: 380 V, 6/8 kW space: 1800 x 2120/2600 x 2020 mm weight: 3100 kg

Vertical machining center Brand: Mikron Type: VCP 1000 Year of construction: 2000 Control: Heidenhain TNC 426 PB Working range: x-1000mm y-750mm z-750mm Clamping surface: 1150 x 750 mm Workpiece weight: max. 1000 kg Drive power: 24 kW at 40 % ED Speed range: 0 – 12000 rpm Recording: HSK 63 Feed: 30 m/min (rapid traverse/working feed) Displacement measuring system: linear arm rods (direct) Tool changer: 60 compartments Weight: approx. 9500 kg With chip conveyor, extraction and IKZ Spindle Step-Tec defective! Already dismantled! The machine can be visited at any time. Again the note that the spindle is defective and must be repaired. This has already been dismantled.

Mikron WF 31C Year of manufacture approx. 1984 - 1987 Operating hours as of 14.11.2023 - 60881 Control Heidenhein TNC 151 The machine can still be viewed and tested under power in our training workshop.

CNC vertical machining center MIKRON UCP 710 With path control Heidenhain TNC 426/430 Year of construction: 1998 Travel: X 710 Y 500 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: NC swivel rotary table NCRST 630 600 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots Full protection cabin with sliding doors and interior lighting Electronic handwheel Renishaw Tool Measurement Probe TS 27 R 3D probe infrared Renishaw MP 12 Conveyor Coolant device 4 pcs height-adjustable machine shoes Operating instructions

Specifications: Travel X/Y/Z: 400 x 400 x 375 mm Max. clamping area: 350 x 800 mm Speed range: (12) 50 - 2240 1/min Feed, infinitely variable: 1 - 630 mm/min Rapid traverse, max.: 1.4 m/min Total connected load: 4.7 kW Dimensions (LxWxH), approx.: 1300 x 1215 x 1700 mm Weight, approx.: 1250 kg Equipment: - Rigid angle table - Coolant device - Machine lamp

X-travel: 700 mm Y-travel: 550 mm Z-travel: 450 mm Control Heidenhain Atek HS Plus Spindle taper HSK 40E Spindle speed 42.000 rpm ATC 24 positions Clamping table 900 x 550 mm Weight of the machine ca. 6,5 t VIDEO: abcs://youtu.be/V4PdQu-AYcA

Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel

Milling machine MIKRON WF 71 D Year of construction: 1990 Control: Heidenhain TNC 355 Travels x = 900, Y = 500 and Z = 500 Condition: fully functional Transport dimensions: approx. H 2100mm x W 2150 mm x L 2500 mm, weight approx. 3500 KG incl. accessories, see picture +Instruction manual +Key

Gear milling machine Micron 106 16 A 380 V

3-Axis CNC Machining Center Mikron VCP 800W Duro Year of construction: 2006 Control: iTNC 530 x-travel: 800 mm Y-travel: 650 mm z-travel: 500 mm Spindle: SK 40 Speed: 12,000 rpm Table surface: 1,000 x 610 mm Tool changer: 24 x Space requirement: approx. 2.5×2.2×2.2 m

Heidenhain Active - Digital Display Stepless feed lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping area 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid response in 3 axles 1400 mm/min Recording ISO 40 Vertical / Horizontal Pinole extendable Mass approx. 1.2 x 1.2 x 1.6 m

- Digital display Heidenhain. - Accessories available. Workspace X-travel 420 mm Y-travel 250 mm Z-travel 340 mm Spindle speeds 12 Speed range 50 - 2240 rpm. Spindle motor power (at 50 Hz) 1500/3000, 1.1/1.85 kW Milling table Clamping surface vertical 200 x 630 mm Clamping surface fixed angle table 250 x 700 mm Number of T-slots 3/5 T-slot width 12-H7 mm T-slot spacing 45 mm Feed range 8 – 400 mm/min. Recording ISO 30 Dimensions and weight length x width 1400 x 1400 mm Total height approx. 1400 mm Weight approx. 850 kg

Manufacturer: MIKRON Type VCE 1000 Pro Year of construction 2002 Control Heidenhain TNC 426 Machine weight approx. 5 t. Tool holder SK 40 Spindle speeds 14,000 rpm x-travel 1015 mm y-travel 508 mm z-travel 675 mm max. table load 1000 kg Space requirement approx. 2.86 x 2.60 x 2.70 m Number of tools in the magazine 24 Pos.

BRAND: MIKRON YEAR: 1986 MODEL: WF-31C APPLICATION TYPE: MILLING LOCATION: GERMANY MACHINE TYPE: MACHINING CENTERS (UNIVERSAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2700 MM MEASUREMENTS DEPTH: 2900 MM MEASUREMENTS HEIGHT: 2000 MM MACHINE WEIGHT: 2300 KG CONTROL UNIT BRAND: MIKRON MAIN DRIVE SPINDLE SPEED RANGE: 31.5 - 3150 1/MIN SPINDLE MOTOR POWER: 3.3/4 KW TOOL TAPER: ISO 40/M 16 NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 500 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 400 MM WORKPIECE WORKPIECE WEIGHT: 400 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MILLING SPINDLE DRIVE: 21 - SPEED RANGE GEOM. GRADUATED: 1259 - QUILL MOVEMENT VERTICAL: 90 MM - FEED DRIVES - ADJUSTABLE: 2 - 3000 MM/MIN - RAPID TRAVERSE SPEED X-AXIS AND Y-AXIS: 6000 MM/MIN, RAPID TRAVERSE SPEED Z A ...

Mikron M7500 + SpyGlass Attachment Optics Type M 7500 Year of construction 2010 Software: RTV-Control RT V2.2.16.11+ Camera Driver for M7500 G runs on Windows 10 NP: 18.000,- net Basic measuring range : 200- 700 °C - with all documents Affordable thermal imaging camera with modern Ethernet interface and remote control options for demanding Real-time applications Stationary process camera for industrial and industrial Scientific applications

Stock Number: 3815 PROCESSING Manufacturer: MIKRON , Type: HSM 400U Machine NO.: 107.87.00.036, Year of manufacture: 2003 Specifications: Table size Macro Magnum mm Gr. table load 25 kg Longitudinal movement (X) 400 mm Transverse movement (Y) 240 Usable mm Vertical movement (Z) 350 mm Spindle cone HSK-E40 Infinitely variable spindle speeds 0-42,000 rpm Spindle motor 13/10 Kw A-Ash +/- 110 degree B: Ash 360 degrees Tool changer Erowa 99 places Control Heidenhain 530 Fabr. Accessories: Length: 2900 mm + Robot, Height: 2700 mm, Width: 2400 mm, Weight: 5500 kg

with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!

Quill stroke 50 mm Dimensions approx. 120 x 120 x 150 cm Weight approx. 850 kg 12 spindle speeds from 50 - 2240 rpm 18 feeds from 8 - 400 mm/min Rapid traverse 1400 mm/min in all axes Travel X/Y/Z 350/200/360 mm Tool holder ISO 30 incl. accessories: Heidenhain digital display, Vise with 100 mm jaw width new

BRAND: MIKRON YEAR: 2004 MODEL: HSM800 APPLICATION TYPE: MILLING LOCATION: SLOVENIA MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 8300 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: ITNC 530 MAIN DRIVE SPINDLE SPEED RANGE: 36000 1/MIN NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 800 MM Y-AXIS MOVEMENT: 600 MM Z-AXIS MOVEMENT: 500 MM MEDIA MAIN ELECTRONIC CONNECTION: 3X400V / 50 HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - CLAMPS HKS50 EXTRA INFORMATION ALSO INCLUDED IS THE REFO FIX SYSTEM AS SHOWN IN THE PICTURE AND A LIST OF CLAMPS THAT GO WITH THE MACHINE.

BRAND: MIKRON YEAR: 2002 MODEL: VCP 710 APPLICATION TYPE: MILLING LOCATION: GERMANY MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: HEIDENHAIN MODEL: TNC 426/430 MAIN DRIVE SPINDLE SPEED RANGE: 20000 1/MIN MOVEMENT X-AXIS MOVEMENT: 710 MM Y-AXIS MOVEMENT: 550 MM Z-AXIS MOVEMENT: 500 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - IFS OIL MIST SEPARATOR IFMC 1100 - TOOL SHRINKING DEVICE (DIEBOLD) - MACHINE VICE 2X (ATORN) - TOOL HOLDERS HSK-A-63 + CUTTER HEADS - CARBIDE CUTTER (OPTIONAL AS NEGOTIATION SUGAR) - SCRAPER BELT CHIP CONVEYOR - TOOL CHANGER - CONNECTION FOR MAGNETIC TABLE AVAILABLE QUALITATIVE MACHINE BENEFITS: - EXTRA EQUIPMENT INCLUDED

BRAND: MIKRON YEAR: 1994 MODEL: VCE750 APPLICATION TYPE: MILLING LOCATION: GERMANY MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: MIKRON MAIN DRIVE SPINDLE MOTOR POWER: 7,5 / 10 KW NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 750 MM Y-AXIS MOVEMENT: 400 MM Z-AXIS MOVEMENT: 500 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NO THREAD CUTTING POSSIBLE (THE MACHINE DOES NOT HAVE THIS TOOL) - 20-FOLD TOOL CHANGER

For sale is: 1 piece used tool milling machine Manufacturer: Mikron Type: WF51D Year: 1980 x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 3150 rpm Operating voltage 380 V Control : Heidenhain TNC 355B Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant reservoir electronic handwheel Machine comes with a wide range of accessories, see pictures (incl. tool cabinet). The milling machine can be viewed in our warehouse in 09599 Freiberg.

Control Heidenhain ITNC 530 60-fold tool changer Spindle HSK 50 E with 36,000 rpm 4-fold pallet changer, pallets 800 mm x 400 mm Table chuck Infrared Probe PS 32 electr. Handwheel Laser Tool Measurement Spindle cooling unit

Mikron C Axis Machine Table - with Heidenhain control 430 - Siemens server motor - Table: 60 x 110 cm - 4th axis, diameter: 50 cm - Weight: 650 kg Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Machining center Mikron VCP 1350 :::SPECIFICATIONS::: CNC Model: Heidenhain - CNC version: TNC 426 - Tool connection: HSK 63 - Spindle power: 27Kw Number of spindle revolutions: 24000 - Number of tools: 46 - X Axis Stroke: 1350mm - Y Axis Stroke: 900mm - Z Axis Stroke: 750mm Rapid feed linear axes X Y Z: 30m/min Guides: roller Tilting rotary table: yes Round table type: continuous Table size: 800mm Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4130mm Width: 3680mm Height: 3150mm Weight: 10100Kg

BRAND: MIKRON YEAR: 2007 MODEL: HSM 400 U APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: HEIDENHAIN GINDUMAC ID: ES-MIL-MIK-2007-00001 Technical Information CONTROL UNIT BRAND: HEIDENHAIN MODEL: ITNC 530 MAIN DRIVE NUMBER OF SPINDLES: 1 NUMBER OF AXIS: 5 MOVEMENT X-AXIS MOVEMENT: 400 MM Y-AXIS MOVEMENT: 240 MM Z-AXIS MOVEMENT: 350 MM

BRAND: MIKRON YEAR: 2008 MODEL: HSM 400 U APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: HEIDENHAIN GINDUMAC ID: ES-MIL-MIK-2008-00001 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2400 MM MEASUREMENTS DEPTH: 2100 MM MEASUREMENTS HEIGHT: 2400 MM CONTROL UNIT BRAND: HEIDENHAIN MODEL: ITNC 530 MAIN DRIVE NUMBER OF SPINDLES: 1 NUMBER OF AXIS: 5 MOVEMENT X-AXIS MOVEMENT: 400 MM Y-AXIS MOVEMENT: 240 MM Z-AXIS MOVEMENT: 350 MM