used müller eccentric presses

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300*200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press #5449 Stroke: 55 mm Ram adjustment: 8 – 96 mm Turn: 50 1/min Max force: 45 t Weight: 2550 kg

Inv. Num. : 6682 Type: PDE 100 RF-HK Producer: Müller Created: 2000 Parameters: Control system: SIEMENS SIMATIC Compressive force: 1000 kN Stroke length: 330 mm Maximum stroke rate per minute: 55 1/min Adjustment of the plunger: 100 mm Main engine power: 11 kW Machine height: 2600 mm Machine length: 2200 mm Machine width: 2000 mm Machine weight: 7500 kg Equipment: Technical Documentation

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

Offer 24163 Technical data approx.: - Compressive force 135 t - Projection 350 mm - Table size approx. 1000 x 680 mm - Through-hole in the table mm - Maximum installation height approx. 460 mm - Plunger area 350 x 280 mm - with lateral cantilever, left + right, 125 x 200 mm - Tenon hole in the ram 50 mm - Plunger adjustability 65 mm - Stroke adjustment 20 - 180 mm - Stroke rate approx. 50 /min - Movable shielding, retrofitted in 1991 - Pneum. Actuated rotary wedge coupling - Drive 400 V / 7.5 kW - Space requirement approx. W 1500 x H 2550 x D 1800 mm - Weight approx. 9000 kg

Manufacturer: W. Paul Müller Maschinenfabrik Type: EXP 100 SVHK Stock number: 1025 Year of Make: 1993 Compressive force: 100 tons Projection: 300 mm Plunger strokes: 100 per minute Adjustable plunger: 60 mm Stroke adjustable: 10 - 100 mm Motor power: 5.5 kW Weight: 6400 kg

Single Stand - Eccentric Press MÜLLER GEFREES Type PDET 5 S/EK Masch. No. Year of construction 1988 Compressive force 5 ton. Projection 125 mm Stand passage 170 mm Table surface 280 x 220 mm Waste hole 90mm Ram surface 160 x 100 mm Stroke adjustment 4 to 40 mm Ram adjustment 30 mm Installation height largest stroke top max. 210 mm Stroke rate 200 strokes/min. Clamping pin bore 25 mm Table height above corridor 900 mm Motor power 0.55 kW Mains connection 380 Volt, 50 Hz - pneumatic clutch-brake combination - electric foot switches - Control cabinet on the machine Space requirement L x W x H 900 x 600 x 1700 mm Weight 530 kg very good condition; used

pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm total power requirement: 15 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 10-100 mm no. of strokes: 80 Hub/min ram - range of adjustment: 60 mm table surface area: 900x600 mm ram surface: 800x230 mm hole in the table: 300x200 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1700x1500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 15t, stroke adjustment: 0-60mm, stroke speed: 120/min.

Pressing force: 100t, throat depth: 300mm, stroke speed: 60/min, stroke adjustment: 10-100mm, motor power: 7,5hp.

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 420 mm -Table recess: 340 x 205 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 395 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Punching device: incl. 4 column punching tool Matocapco MOR, see photos -Dimensions: 1650/1920/H2300mm, 420/1000/H980mm, 700/600/H1050mm -Total weight: approx. 3200 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 415 mm -Table recess: 195 x 340 mm - Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 400 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Dimensions: 1620/1715/H2250mm, 420/1000/H1110mm, 700/630/H1050mm -Weight: 2860kg, 143kg, 104kg

Hydr. Single column press make MÜLLER type CD 16.11.55Machine -No: 10480 Year 1983Press force: 16 tTable size: 450 x 350 mmPiston diameter: 90 mmBear size: 320 x 240 mmPiston stroke: 100 mmDiarrhea opening in the table: 100 mmDimensions L x W x H: 700 x 1100 x 2005 mmWith- Cutting impact damping- safe control- Two-hand release- Photocell- infinitely adjustable pressure settingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee