Inv. Num. : 6908 Type: SCE/L 25 Producer: Nagel Created: 2001 Parameters: Nominal current: 7 kW Control system: Siemens Simatic OP 27 Vibration deflection: 3 mm Stroke of the stone guide: 35 mm Max pressure: 4 bar Length: 2100 mm Height: 2200 mm Width: 1200 mm Machine weight: 2000 kg Equipment: Manual
- 2 head drilling machine - standard machine - desk model
Paper Drill Nail Citoborma 490 Year of construction 2006 Kind. Ref. PS5877 very good condition, comes from authority! Price 2300 Euro FCA Essen, Germany
2-Head Drill Floor model with base cabinet Foot switch
Four head paper driller Nagel Model Citoborma 480 AB Year 1988 Details 4 head paper driller with adjustable heads with tabulator Operation Electric Available Direct
Inspector, Fabr. Nail, Type: NAG, Type: Full inspection 5/8, up to 5,000 fl/h, furnished on 0.33 lt BV-Maurer + 1.0 lt bracket, KK 0.33 lt Gourmet, KK 0.5 lt NRW + EURO, running direction re->li for floor, muzzle, sidewall and lye control with new card for side control serviced annually
Brochure & block stitching machine Gable roof & flat table position 1-head model Stitching head spacing normal 8 cm works with staples (not with wire roll) Stitching up to 25 mm / stinging up to 45 mm Staple ring brackets option Stand model Electric motor Foot trigger
Built in 1990 Staple Stitching Machine 2 stitching heads electr. Drive electr. Foot switch incl. base frame Delivery date: immediately from stock Price on request. We deliver and install worldwide!
Clip stitching machine nail Multinak S; good condition; cleaned and checked. 2xHeftkopf 24; Block or saddle stitch. Twin head stitcher nail Multinak S; good condition; cleaned and checked; two heads 24; flat or saddle staplinng.
Nail Foldnak Compact Booklet Machine; good condition; cleaned and tested; 2 staple stitching heads; Paper size max. 325x450mm, min.105x210mm; Pressing device; Front trim; Shed display. Bookletmaker Nagel Foldnak Compact; good condition; cleaned and checked; two stapling heads; paper size max.325x450mm, min.105x210mm; pressing down unit; Trimmer; stream delivery.
Digi-Fold Nagel Serial: 120481 Include Operating manual and spare part list No working condition / For spare parts or repairing if invoiced in Germany + 19 % VAT Spare parts carrier / Non-functional
electric (380Volt) register punch with manual block clamping and register punch, bolt-action device for the production of registered handles,
DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: - Gathering tower S8 - Staples and folding Foldnak 100 - Front trimming trimmer 100 Nail Gathering Tower S8 Specifications: - 8 stations - Stack height cover sheet station: max. 130mm - Stacking height 2-7 station: max. 65mm - Format: min. 105x160mm; max. 364x520mm - Capacity: 5,000 sets/h - Dimensions: 2.140x650x770mm - Weight: 160kg Foldnak 100 Technical details: - Format: min. 140x148.5mm; max. 364x521mm - Capacity max.: 3000 sets/h - Dimensions: 115 x 72 x 118cm (HxWxD) - Weight: 220kg Trimmer 100 Technical details: - Brochure sizes: min. 74x148.5mm; max. 260,5x320 - Max. output: 3000 cuts/h - Brochure thickness max.: 5mm (approx. 50 sheets, 80g/sqm) - Dimensions: 106 ...
honing diameter:22/56 mm stroke:500 mm cycle time:40 sec Vertical Honingmachine - connecting rod (conrod) OEM Line.
honing diameter:10-120 mm stroke:350 mm honing length max.:700 mm spindle turning speed - stepless:80-1500 1/min Used Honing Machine Make: Nagel Type: PV-150/VS8-35LA 287032 YOM: 1993 Technical data: Z-spindle stroke 350mm Z-slide stroke 1500mm Cross slide travel: ± 60mm Longitudinal travel 1800mm Swivel table at 0/30/45 spline fixed Rotating speed 80-1500 U/min Variable flushing ring of 60-105 mm Control MS-U2 99 diverse Programmes Tool control hydraulical/EMZ/ Makroform Dimensional control via air measurement Still under power, fully functional
honing diameter:30-180 mm stroke:600 mm throat:370 mm Verticval Honingmachine - machined Cyliner Liner - out of OEM Line.
Description: Carrying capacity: 500 kg Fork length: 800 mm Lifting height: up to approx. 1500 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 1,900 mm, weight approx.: 150 kg
Description: With a drawer Approx. Onsite Dimension. (l x w x h): 750 x 700 x 890 mm, weight approx.: 50 kg
Description: serial number: 286875 control: HLPCTVAM  , including: cleaning machine 1: RUMA, MZ150 B900, YOM: 2002, max. rotational speed: 3000 rpm, power: 4 kW, cleaning machine 2: KRAINTEK, RM, YOM: 2018, power: 3 kW conveyors/transportation system oil pump control: HLPCTVAM, weight approx.: 13,500 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,000 x 3,700 mm
Description: serial number: 286883  , please also have a look at the PDF documents of this machine control: NAGEL, weight approx.: 9,500 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,000 x 3,700 mm
Description: machine number: 287041  , honing diameter: 30 - 180 mm stroke: 600 mm discharge: 370 mm power requirement: 18 ,kW  , please also have a look at the PDF documents of this machine honing diameter: 30 - 180 mm, stroke: 600 mm, total power requirement: 18 kW, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,500 x 2,500 mm
Description: machine number: 287605  , honing diameter: 30 - 180 mm stroke: 600 mm discharge: 370 mm power requirement: 23 kW  , please also have a look at the PDF documents of this machine honing diameter: 30 - 180 mm, stroke: 600 mm, control: NAGEL, total power requirement: 23 kW, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 4,000 x 3,500 mm
number of stapling heads: 2 voltage: 220 V frequency: 50 Hz dimensions of press (L x W x H): 60 x 70 x 105 cm weight: ca. 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 1 drilling capacity diameter min.: 4 mm drilling capacity diameter max.: 12 mm serial no.: number of spindles: 1 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x90 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 4 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm voltage: 220/380 V frequency: 50 Hz Dimensions (L/W/H): 100x70x150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm serial no.: 526S130 number of spindles: 2 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x120 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of stapling heads: 2 Dimensions (L/W/H): 40/40/80 mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
connection voltage: 230 Volt drilling capacity diameter max.: - mm drilling capacity diameter min.: - mm Nagel 2 spindle paper drilling machine as table model This model is operated with 230V. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.