used NETSTAL for sale

Warehouse No.: 503010 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 47942 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...

Warehouse No.: 503011 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 39299 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...

PET-LINE 60N/95 complete system for preforms PCO consisting of: 1. PET Injection system Netstal PET 2000-3700 R 2. 60 cavity injection mould Otto Hofstetter AG (27 gr) 3. 60 cavity injection mould Otto Hofstetter AG (30,5 gr) 4. Dryer Piovan 560 kg/h 5. Air dehumidifier RPA 1200, 1200 m3/h 6. Compressor Aircenter SM 12, 60 m3 7. Water chilling unit Chiller CA1921MT 8. Water chilling unit Chiller CA0621MT Manufacturer: Otto Hofstetter AG Year of production: 2012 Installed power: 462 kW. Working hours: 7285 h

B&A REF: 8945 TON: 450 SHOT WEIGHT: 916 SCREW DIAMETER: 70MM STROKE VOLUME: 954CM3 INJECTION PRESSURE: 2144AR PLATEN SIZES: 1150 X 1185MM DBTB: 920 X 920MM MIN MOULD HEIGHT: 500MM MAX MOULD HEIGHT: 950MM MOULD OPENING STROKE: 800MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 250MM CONTROLS: DPS CORE PULLING: 2 AIR VALVES: 3 MOTOR: 75 HEATING CAPACITY: 43KW ROBOT INTERFACE: STAR UXE 1000 SCREW DRIVE: ELECTRIC

Offer: Netstal Synergy 3500/1700 Robot IML SM700/TM200 High Speed bj./year 2009/10

Description Working hours: 26782 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 27139 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 36359 Machine complete with second and third injection, thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 32848 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.

Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.

Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.

Clamping force [kN] 5500 Clearance between columns (hxv) [mm] 1020 x 920 Maximum opening width [mm] 2251 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1074 Shot weight [g] 1034 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 39,5

Clamping force [kN] 3500 Clearance between columns (hxv) [mm] 730 x 730 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Shot weight [g] 718 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 23,5

Brand NETSTAL Type Synergy 1000-230 Year of manufacture 2005 Clamping unit Clamping force 100 ton Opening stroke 400 mm Beam dimension (h x v) 460 x 460 mm Installation height min. 250 mm Installation height max. 550 mm Injection unit Screw diameter 35 mm Injection volume 123 cm³ Injection weight PS 118 gr Injection pressure 1890 bar Dimensions and weights Dimensions LxWxH 5,4 x 1,85 x 2,0 m Machine weight 7600 kg Additional information & extras Valve gate 3 pcs.

Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 713 x 713 Min./max. mold height [mm] 400-750 Maximum opening width [mm] 1450 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 719 Injection pressure [bar] 2296 Dimensions and weight Net weight with control cabinet [t] 27 Dimensions (L x W x H) [m] 7.825 x 2.15 x 2.599

Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 720x721 Min./max. mold height [mm] 600-950 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 954 Injection weight [g] 916 Injection pressure [bar] 2267 Dimensions and weight Net weight with control cabinet [t] 24.3 Dimensions (L x W x H) [m] 8.57 x 2.15 x 2.6

The documentation is available CE certificate is available Documentation is available 4 units available Price is for 1 unit > screw diameter 32 mm > injection volume ~ 190 cm3 (for PS) > injection pressure 1482 bar > clamping force form 50 Ton > minimum mold size 195 mm > max opening 500 mm > 330 x 540 mm plate > column spacing 375 x 200 mm

INJECTION UNIT Screw diameter: 80 mm Calculated injection volume: 1608 cm³ Pressure on the material: 2304 bars CLOSURE UNIT Closing force: 5000 kN Opening travel: 0-860 mm Mini/Max Mold Thickness: 750-1250 mm Passage between columns: 920 x 920 mm

Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907 x 910 Clearance between columns (hxv) [mm] 630 x 630 Min./max. mold height [mm] 460-800 Maximum opening width [mm] 1310 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 456 Injection pressure [bar] 1890 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (L x W x H) [m] 6.95 x 2.075 x 2.48

Injection unit Screw diameter: 80 mm Calculated injection volume: 1608 cm3 Length/diameter ratio: 27 L/D Pressure on the material: 2400 bars Closing unit Closing force: 5000 kN Opening stroke: 901 mm Minimum mold thickness: 600 mm Passage between columns: 1020 x 920 mm General Heating power: 132 kW Other Equipment : Commissioned: 2010 Number of hours: 7000 h Tonnage: 500

Netstal SynErgy 1500-600 injection molding machine year of production 2003 – 45kW engine – maximum clamping force 1500kN – injection unit 600 – screw diameter 50mm – injection volume 353 cc – injection weight 339 g – injection pressure 1890 bar – hydraulic ejector on the movable plate – hydraulic core on the movable plate – hydraulic core on a fixed plate – two air valves – mold height 250-550mm – mold opening stroke 0-450mm – spacing between columns 460 X 460 mm – weight of the machine 11,200 kg

Clamping force [kN] 3000 Clearance between columns (hxv) [mm] 720 x 720 min./ max. mold height [mm] 400-1100 Maximum opening width [mm] 700 injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 680.9 Injection pressure [bar] 2100 Centering ring diameter 120 / 160 mm Core movable plate - 2 pcs Air valve - 8 pieces Euromap 12 Oil tank 445 ltr

Netstal S 600-230 injection molding machine year 2007 Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 617 x 600 Clearance between columns (hxv) [mm] 410 x 410 min./ max. mold height [mm] 200 - 500 Maximum opening width [mm] 540 injection unit Screw diameter [mm] 32 Injection volume [cm3] 123 Injection weight [g] 118 Injection pressure [bar] 1890

Netstal brand Clamping force [kN] 1000 - 2990 Year of production 2004 Injection weight [g] 200 - 499

Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (=standard) mm M12-M16 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes

Machine: NETSTAL 550 T 5500-4200 EVOS Year: 2010 Number of hours: 7000H Closing Closing force: 550 T Opening stroke: 900 mm Between columns: 1020 x 920 mm Mini / maxi mold: 600-1050 mm Max distance between plates: 1950 mm Injection: Screw diameter: 80 mm Screw length: 27 D cm3: 1608 Bars: 2400 General: Engine power: 132 KW Heating power: 94 KW Closing weight: 32 tonnes Injection weight: 8 tonnes Dimensions length: 9.83 m Dimensions width: 2.54 m Dimensions height: 2.35 m Options: Cores: 2 Robot interface: yes E 67 Bi metal: yes 12 pneumatic controls 16 hot runners Colorator interface; bi-material interface; compression injection interface Graph track Power master type lamination

Clamping force kN 2400 Mould thickness mm 460-800 Opening stroke mm 0-510 Distance between tie-bars V/H mm/mm 630/630 Stroke, injection unit mm 550 Nozzle contact force KN 78 Screw diameter mm 60 Injection pressure bar 1534 Max. injection volume cm3 565 ø centring ring mm 160 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M20 Robot Yes

Clamping force kN 2000 Mould thickness mm 200-500 Minimum mould diameter mm 315 Opening stroke mm 200-480 Distance between tie-bars V/H mm/mm 510/430 Stroke, injection unit mm 470 Nozzle contact force KN 75 Screw diameter mm 55 Injection pressure bar 1751 Max. injection volume cm3 465 ø centring ring mm 125 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M16 Robot Yes

Clamping force [kN] 3000 Dimensions of mounting plates (hxv) [mm] 1060 x 1120 Clearance between columns (hxv) [mm] 720 x 720 min./ max. mold height [mm] 400 - 750 Maximum opening width [mm] 1100 injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 680 Injection pressure [bar] 2100

Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907x910 Clearance between columns (hxv) [mm] 630x630 Min./max. mold height [mm] 460-800 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 424 Injection pressure [bar] 1890 Electrical and hydraulic equipment Heater power [kW] 30.3 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (length x width x height) [m] 6.95 x 2.08 x 2.48

This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.

This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.

Preform Weight (Max): 30,5 g // Neck Type: PCO

Capacity: 0 t (1) horizontal / (2) vertical: 0   Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Clamping force: 150 to Stroke volume: 201 cm3 Ejector stroke: 150 mm Ejector force: 49 kN Pressure on material: 2218 bar Screw diameter: 40 mm from: 20 rpm up to: 300 rpm Mould heating: 20 kW Screw drive: 30 kW Machine´s weight about: 9000 kg Overall dimensions machine: Length: 5700 mm Width: 1650 mm Height: 2220 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Clamping force: 2400 kN - Shot weight max: 456 g - Injection rate: 2.375 cm?/s - Injection pressure: 1.890 bar - Injection volume: 475 cm? - Screw L/D ratio: 22,7 - Nozzle stroke / force max.: 88 mm / kN - Mould opening stroke max: 510 mm - Mould height max: 800 mm - Mould height min: 260 mm - Distance between tie-bars (h x v): 630 x 630 mm - Mold opening force: 534 kN - Core pulls: 0 - Oil tank capacity: 420 l - Operating hours: 0 - Power: installed max: 55 kW - Weight: 15.800 kg - Dimensions (long x wide x high): 7.208 x 2.075 x 2.187 mm