used NF for sale

Packaging machine for various areas in the GRANULES category: Food - snacks, peanuts, sweets, chips, dried fruits, cookies in general, etc. Automotive - small parts in general. Current setup for packages from 30g to 60g. Possibility of packing larger volumes with the acquisition of a hopper for setup. Productivity: 40 to 60 packs per minute. Description: Vertical packaging machine made of stainless steel and carbon steel parts with zinc plating. Front, side, bottom, upper protections and moving parts manufactured in compliance with NR-12. 10-head scale coupled to the machine, product supply conveyor, output conveyor, electrical panel in compliance with NR10. Configured with Schneider PLC and HMI Touch Screen with color screen where controls and functions, production and storage of data and recipes are managed. Equipment Voltage: 220v, Three Pha ...

CTR 1010670 THESE ARE KITCHEN EQUIPMENT AND FURNISHING A PIZZA FRANCHISE STORE COMPOSED OF: DOUBLE BELT OVEN BRAND MORETTI FORNI -EQUIPPED OF CONTROL PANEL N2 ELECTRICAL PANELS AND 2 EMERGENCY BUTTONS, MISCELLANEOUS KITCHEN EQUIPMENT MADE OF STEEL, COLD ROOM COMPLETE WITH CONTROL PANEL EXTERNAL ELECTRICAL AND AEROVAPORATOR MODULE INTERIOR BRAND LU-VE, DISHWASHER BRAND COMENDA (UNIVERSAL WASHING MACHINE), BENCH FOR PIZZA PREPARATION, SAFE WITH DRAWER "CONFORTI", ELECTRONIC/COMPUTER EQUIPMENT VARIED, VARIED DÉCOR CONSISTING OF TABLES, STOOLS, CHAIRS, ETC. NB: ITEM INTENDED EXCLUSIVELY FOR PEOPLE WITH A VAT NUMBER

CTR 1020924 THESE ARE KITCHEN EQUIPMENT AND FURNISHING A PIZZA FRANCHISE STORE COMPOSED OF: DOUBLE METHANE GAS BELT FURNACE V230-MORETTI OVENS - SERIAL NUMBER 252444/ SERIAL NUMBER 252445, MISCELLANEOUS KITCHEN EQUIPMENT, MACHINE FOR INDUSTRIAL WASHING, PIZZA COUNTER "INT'1 DOOR MAKELINE LGP", COLD ROOM, SAFE WITH "CONFORTI" DRAWER, SAFETY CABINETS 5 COUNTERS, VARIOUS COMPUTER EQUIPMENT, VARIED FURNISHINGS CONSISTING OF TABLES, STOOLS ETC NB: ITEM INTENDED EXCLUSIVELY FOR PEOPLE WITH A VAT NUMBER

CTR 1019223 THESE ARE KITCHEN EQUIPMENT AND FURNISHING A PIZZA FRANCHISE STORE COMPOSED OF: XLT DOUBLE BELT FURNACE SERIAL NO.: 36863-0-4-2015/29, TN COLD ROOM, EXTRACTION SYSTEM, INDUSTRIAL WASHING MOD GF70, "INT'4" PIZZA COUNTER DOOR MAKELINE LCP", SAFE WITH DRAWER "CONFORTI", 5-DOOR SECURITY CABINETS "CONFORTI", VARIOUS PC EQUIPMENT + ACCESSORIES , VARIED FURNISHINGS CONSISTING OF TABLES, STOOLS ETC. NB: ITEM INTENDED EXCLUSIVELY FOR PEOPLE WITH A VAT NUMBER

CTR 1018212 THESE ARE KITCHEN EQUIPMENT AND FURNISHING A PIZZA FRANCHISE STORE COMPOSED OF: DOUBLE METHANE GAS BELT FURNACE V230-MORETTI OVENS - SERIAL NUMBER 241109 / SERIAL NUMBER 24604, VARIOUS KITCHEN EQUIPMENT, INDUSTRIAL WASHING MOD GF70, "INT'4 DOOR MAKELINE LGP" PIZZA COUNTER, SAFE WITH DRAWER "CONFORTI", SECURITY 5 "CONFORTI" DOORS, VARIOUS EQUIPMENT PC + ACCESSORIES, VARIOUS FURNITURE CONSISTING OF TABLES, STOOLS, ETC. NB: ITEM INTENDED EXCLUSIVELY FOR PEOPLE WITH A VAT NUMBER

Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...

Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m

Operating hours: 1,265 h 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control console for convenient set-up - Co ...

Hebrock AKV3005DK-F edge banding machine with joints, corner copying and two scraper blades. Very neat machine from small business in excellent condition. Touch-screen interface with PLC control for easy operation of the machine, 12 operating programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support, optional equipment extendable by 950mm Suction connection 80 +140mm Aggregates: Quick-change basin with glue outlet, there are two glue basins available, both of which are included in the scope of delivery (1 basin was used for EVA glue and one for PU glue), the PU glue basin is practically as good as new, was purchased only for one order. Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness ma ...

Clamping force: 320 t Year of construction: 2007 Injection weight in PS: 131 / 131 g Injection unit: .../800 / 350 Screw diameter: 35 / 35 mm Spray volume: 139 / 139 ccm Injection weight in PS: 131 / 131 g Clamping unit: 320/... Clamping force:: 320 t Lights spar spacing: 720 x 720 mm Tool installation height: 300...1400 mm Ejector travel: 250 mm General information: Delivery Time: Natychmiast Weight: 17,000 kg Dimensions(m) LxWxH: 6.83 x 2.25 x 2.50 m Instrumentation: 1 x 8-speed water battery 1 x 12-speed water battery 1 x 4-way water battery 3 x hydraulic core pull control 4 x Air Valve Robot interface according to EUROMAP 67

Coffee roaster 60 kg/batch On request, the silo system, Sortex system and other machines can also be taken over. The roaster is located in Germany and can be viewed and tested in its installed state. For more photos, information or viewing appointments, please feel free to contact us by phone or in writing.

150-180kg/batch general overhauled (exact listing on request) For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probat

60kg/batch general overhauled (exact listing on request) For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probate, petroncini

For further photos, information or viewing appointments, you are welcome to contact us by phone or in writing. Keywords: Roaster, Coffee, Drum Roaster, Drum, Green Coffee, Roasted Coffee, Roasting Machine, Coffee Roasting Machine, Probat, Petroncini

Clamping force: 200 t Year of construction: 2002 Injection weight in PS: 72 / 45 g Control type: Selogica Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 x 570 mm Ejector travel: 225 mm General information: Weight: 8000 kg Dimensions(m) LxWxH: 5.1 x 1.8 x 2.2 m • 2 x Hydraulic Core Pull • 1 x Air Valve Snail: Top/Vertical: 30mm Bottom/Horizontal: 25mm

Arburg Allrounder 320K 700-100 Parameter: Clamping force: 70 t Year of construction: 05/2004 Injection weight in horsepower: 65 g Injection unit: .../100 Screw diameter: 30 mm Spec. Spray pressure: 1390 bar Injection volume: 71 ccm Injection weight in horsepower: 65 g Hydr. Drive power: 11 kW Cylinder heating capacity: 5 kW Clamping unit: 700/... Clamping force:: 70 t Size of the clamping plates: 446 x 446 mm Lights tie bar distance: 320 x 320 mm Opening travel: 350 mm Max. plate spacing: 550 mm Ejector travel: 125 mm General information: Weight: 2250 kg Dimensions (m) LxWxH: 3.2 x 1.5 x 1.9 m Equipment: 1 x hydraulic core pull control 1 x pneumatic valve

Year of construction: 1997 Control type: MC3F Injection unit: ..,/135 Screw diameter: 30 mm Spec. Spray pressure: 2025 bar Injection volume: 74 cc Injection weight in hp: 68 g Clamping unit: 80/... Clamping force: 80 t Size of the clamping plates: 610 x 610 mm Lights tie bar distance: 405 x 405 mm Installation height: 250 mm Opening distance: 500 mm plate spacing: 750 mm Ejector travel: 150 mm Hydr. Drive power: 15 kW Cylinder heating capacity: 9 kW General information: Caption: Polskie Delivery time: Short term Size(m) LxWxH: 3.8 x 1.4 x 2.0 m Weight: 3.200 kg

Year of construction: 2013 Screw diameter: 60 mm Spec. Spray pressure: 1610 bar Injection volume: 848 cc Injection weight in hp: 800 g Clamping unit: Clamping force: 260 t Size of the clamping plates: 835 x 835 mm Lights tie bar distance: 575 x 575 mm Installation height: 195 mm Opening distance: 405 mm plate spacing: 600 mm Ejector travel: 180 mm Hydr. Drive power: 21 kW Cylinder heating capacity: 16.2 kW General information: Delivery time: Short term Dimensions(m) LxWxH: 6.3 x 1.8 x 2.0 m Weight: 8500 kg

Complete mill / mill plant with a capacity for the production of 100 tons of flour/24h consists of: Grain cleaning systems, bucket elevators, conveying augers, stainless steel pipe systems, etc. The automated mill has been continuously modernized and expanded. 1 Airtronic roller mill, made by Bühler 1 top-mounted filter, made by Bühler 1 Dust cleaners 1 double screening machine, Fbrikat Bühler 3 MJZF, make Bühler dissolver, total 7 metal silos for grain Conveyor systems and stainless steel pipe systems 1 Compressor systems Laboratory equipment consisting of: 1 glue washer 2 Perten Inframatic 8600 1 case counting device 1 gluten index device 1 Schlagkreuzmühle To the flour store: Storage cells 6x 7.5 tons Storage cells 2x a 25to 1x 15to -------------------- Elevators: 3x A 75to  ...

Used spiral mixer DIOSNA, type: SP 80 D -refurbished- (picture before overhaul) The general overhaul will be carried out after order confirmation and will take about 2-3 weeks. - for 80 kg of dough or 50 kg of flour - Stainless steel spiral - Stainless steel boiler - 2 time clocks - 2 speeds - 1 reverse gear - Emergency stop switch - Condition: Very good, as good as new - 6 months warranty A video of the machine in operation can be made on request. The mixer is in very good condition, as good as new and is ready for immediate use. Viewing and test run are possible by arrangement.

Used croisant wrapping machine for filled products FRITSCH, type: FRH 400-L -In bakery condition- Year of construction: 2010 - for wrapping filled pastries - very good, well-kept condition - all technical plans and documents available Further information on request. Inspection and test run are possible by arrangement.

Used vacuum filler FREY, type: Konti A50 - good condition More information on request.

Used croissant line CIM -In bakery condition- - Dough sheeting machine - Cutting station - Winding unit - For unfilled croissants Visits and test runs are possible by arrangement.

Used traypacker with shrink packer MACDUE, type: H100/A - El. Connection: 400 V, 50 Hz, 55 kW, 80 A - Air pressure: 6 bar - Condition: Very good, little in use All documents, such as spare parts list, el. Wiring diagram and operating instructions are available. Further information on request. Inspection and test run are possible by arrangement.

Used spiral kneader KEMPER, type: ST 30 -Completely overhauled- - for 30 kg flour or 48 kg dough - technical condition: very good - completely overhauled - 6 months warranty Confession and test run are possible by arrangement.

Autoclave TANK, Type: 340E -New- The autoclave was only used for 5 cookings at our customer's site. Electric autoclave with 340 litre boiler volume, reinforced quick-release fastener and threaded spindle - Made in Germany For sterilization, pasteurization and preservation. - Completely made of high-quality stainless steel - All safety equipment (latest requirement of the Pressure Vessel Ordinance) - All. Safety equipment, such as safety valve, pressure gauge, overheating protection, steam drain tap, safety outlet tap, etc. - Construction inspection and pressure test by TÜV included - Incl. all required certificates - Fully autom. Control by F-value controller - Fully autom. Control of operating temperature, core temperature, preselection and operating time clock - Content: 340 liters - Double jacket heating via built-in steam generator - Heating type: Electric, 27 kW, ...

New FRITSCH roll-out machine; Type: Rollfix 300 CM/650 -NEW- Dough roll-out and cutting machine - autom. Flour spreaders - Manual and foot shift - infinitely adjustable speed - left table with cutting plate and plastic strap - right table with plastic strap - incl. triangle cutting knife 160 x 180 mm - incl. cross cutting roller 120 mm - incl. longitudinal cutting roller 120/700 - Original price of the machine: EUR 24.306,- Specifications: left table 1,400 mm right table 1,600 mm Width 650 mm Roller opening 0.1 - 45 mm Roll diameter 88 mm Throughput height protective grille 85 mm Discharge belt 40 m / min. or 67 cm / sec. Cutting speed 2 - 7 m / min. El. Connection 400 V, 50 Hz, 1.1 kW Overall dimensions 3,700 x 1,270 x 1,300 mm Weight 416 kg The reason for the sale of the machine is a bakery takeover. The machine is in very good condition and has neve ...

Used shrink capsule capper NORTAN, Type: UNICAP 35 Built-In: 2000 Suitable for capping of capsules in tinfoil, aluminium or thermo capsules. - complete equipped - with capsule supply table - feed in screw - format parts for 1 l and 0,75 l bottles available - Capacity : maximum 2.500 bottles/h - controlling for capper and heating shrink bowl installed Condition: very good, ready for operation. An inspection is possible at every time.

Used riser SCHÄFER & FLOTTMANN - with NORDSON glue device ProBlue 7 Further information on request. Sightseeing and test run are possible by arrangement.

Cartoning machine MINGOZZI, type: 1010 incl. hot glue system UES filling of bulk in cartons with volumetric dosing system. -Infinitely variable format without tools - so small product batches also suitable - hot glue device manufacturer UES (2009) used for carton sizes: - width: 119-193 mm - depth: 40-88 mm - height: 198-295 mm Power supply 380 V, 50 Hz, 25.5 A Measures 30 PCs. / min. Glue pump 1.2 bar Pumps 1.85 kW

Spiral mixer BOKU, type: Th SK 240-áberholt-- incl. 3 retractable boiler â for up to 240 kg dough - including delivery. The machine is being over Germany after order confirmation.

MASCHINENTYP : TruLaser 5030 Fiber (L41) HERSTELLER : Trumpf BAUJAHR : 2010 BETRIEBSSTUNDEN : NC:57796h Laser Ein: 37360h ARBEITSBEREICH : 3000 x 1500 x 115mm LASERLEISTUNG : 3000W STEUERUNG : Siemens Sinumerik 840D SL STANDARTAUSTATTUNG : • Geschlossener Maschinenrahmen mit integriertem Laseraggregat • Torque Antrieb in Kombination mit Linear Direktantrieben • Geschlossene Strahlführung per Lichtleiterkabel (LLK) • Maschinenkühlaggregat • Integrierte Schaltschränke mit Innenbeleuchtung • Automatischer Palettenwechseler in Längsrichtung • Breites Längsförderband • Arbeitsraumbeleuchtung • Positionslaserdiode • Sprüheinrichtung • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatische Düsenreinigung TRUMPF Laser : • Festkörperlaser TruDisk 3001 mit ei ...

Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

WE OFFER AN LOW HOURS ARES SEIKI COMPLETED WIITH TOOLINGS POWER ON 39010 H OPERATING HOURS: 3436 H WORKING HOURS: 4519 H DESCRIPTION: Ares Seiki R Series R4530 CNC High Performance/ High Speed Production Center DIRECT DRIVE SPINDLE - HIGH SPEED 3 AXES RAPID TRAVERSE HIGH RESPONSE SERVO SYSTEM TECHNICAL INFO: X : 450 mm Y : 300 mm Z: 300 mm RPM12,000 RPM ATC12 TaperBT30 Dimensions1200mm x 2230mm x 2480mm WEIGHT : 2200 KG MACHINE WILL BE AWAILIBLE TO LOAD IN NEXT WEEKS

Deckel Maho DMF 300 Linear, built in 2002 TECHNICAL INFO: CONTROLS: CNC SIEMENS Sinumerik 840 D power line, TRAVELS: X: 3,000 mm Y: 560 mm Z: 720 mm Spindle mount SK40 Spindle speed: max 12,000 rpm (limited to 6,000 by gearbox) Tool magazine for 40 tools Operating hours: 21,865 Spindle hours: only 9,320 Very reliable, stable and good machine! No maintenance backlog! - In recent years, small items such as belt pulleys, hydraulic accumulators, scrapers, linkages have been added, regardless of the maintenance positions - In 2018 a new Z-axis ball screw came in. The engine gearbox was also overhauled - Rotary table 560mm (4th axis) for assembly also available and part of the sale The orientation of the Hirth toothing when swiveling would have to be readjusted. However, we only use the machine as  ...

Selling complete switch production with know how. Production include: Bflvedy7tb 1. 51 moulds for plastic parts, two diferent design of switch type programs, ALL MOLDS ARE IN PERFECT CONDITION. 2. 28 stamping tools for steel parts underconstruction of bottom switches and plugs 3. Complete assembly line with tables pneumatic screv drivers delivery vibration machines for screews and other parts 4. Row half product aprox 50000 parts on stock to assemblle 5. Packed finished stock of switches ready to sell in different types and models. 6. testing equimpent for quality for switches. 7. Complete production information with buyers list , price lists. 8. Showroom glass panels with promotional complete types of switches. 9. Lot of other accessories and equipment -look attached photos many more equipment not on photos of machineenseeker only 15 photos limit. Company has ISO 9001 AND IT ...

DH Robotics CGC-80 Centric Gripper Weight: 1500 g Payload: 1500 g The DH Robotics CGC-80 is an advanced three-finger gripper designed for industrial environments that require precision. With a stroke of 10 mm and a recommended payload of 1.5 kg, the three-finger design of the CGC-80 offers the ability to pick up and place hard-to-grip objects such as those with spherical or cylindrical shapes. The DH Robotics CGC-80 offers exceptional ease of use. Plug-ins are available for Universal Robots, OMRON, Hanwha, and more. Properties The DH Robotics CGC-80 is an advanced solution for three-finger centric gripping. Among other things, it offers a cost-effective way to grip cylindrical and spherical objects precisely and reliably. With a stroke of 10 mm and a maximum recommended payload of 1.5 kg, it is particularly suitable for applications in the electronics industry. In terms of ...

DH Robotics PGC-300 Gripper Weight: 1500 g Payload: 6000 g With a stroke of 75 mm and a payload of 6 kg, the DH Robotics PGC-300 is designed to combine intuitive design with practicality. With its impressive accuracy, self-locking and a host of other features, the PGC-300 is the perfect gripper for lightweight collaborative applications. The PGC-300 is easy to set up and comes with plug-ins for most major robot brands such as Universal Robots, OMRON, etc. Properties The DH Robotics PGC-300 is an electric two-finger gripper designed for both industrial and collaborative applications. The award-winning PGC-300 (Red Dot Award, IF Award) gripper combines advanced design with proven reliability. The PGC-300 offers a stroke of 75 mm and a recommended payload of 6 kg. With its self-locking functionality, maximum force limits and other collaboration-oriented features, the DH Robo ...

DH Robotics PGC-140 Gripper Weight: 1000 g Payload: 3000 g With a stroke of 50 mm and a payload of 3 kg, the DH Robotics PGC-140 is designed to combine intuitive design with practicality. With its impressive accuracy, self-locking, and a host of other features, the PGC-140 is the perfect gripper for lightweight collaborative applications. The PGC-140 is easy to set up and comes with plug-ins for most major robot brands such as Universal Robots, OMRON, etc. Properties The DH Robotics PGC-140 is an electric two-finger gripper designed for both industrial and collaborative applications. The award-winning PGC-140 gripper (Red Dot Award, IF Award) combines progressive design with proven reliability. The PGC-50 offers a stroke of 50 mm and a recommended payload of 3 kg. The DH Robotics PGC-140 is an ideal companion for your cobot with its self-locking function, maximum force li ...

DH Robotics RGI-14 Rotary Gripper Gripping force (per jaw): 10~35 N Stroke (both sides): 14 mm Rotation torque: 0.25 N.m Rotation range: Infinite Mechanical specifications Maximum speed of rotation: 1500 deg/s Repeatability of rotation: ± 0.02 deg Backlash of rotation: ± 1 deg Position repeatability (gripping): ± 0.02 mm Opening/closing time: 0.2 s/0.2 s Weight: 1.1kg  Electrical specifications Communication interface: Modbus RTU(RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Nominal current: 1.1 A Peak current: 2 A Ingress protection rating: IP 20 Recommended operating environment : 0~40°C,

DH Robotics RGI-30 Rotary Gripper Gripping force (per jaw): 10~35 N Stroke (both sides): 14 mm Rotation torque: 0.25 N.m Rotation range: Infinite Mechanical specifications Maximum speed of rotation: 1500 deg/s Repeatability of rotation: ± 0.02 deg Backlash of rotation: ± 1 deg Position repeatability (gripping): ± 0.02 mm Opening/closing time: 0.2 s/0.2 s Weight: 1.2 kg  Electrical specifications Communication interface: Modbus RTU(RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Nominal current: 1.1 A Peak current: 2 A Ingress protection rating: IP 20 Recommended operating environment : 0~40°C,

Robot Kawasaki RA006L E-Controller new & original packaging Year of construction: 02/2018 Control: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consisting of: • Robot kinematics • Controller (10m cable to robot kinematics) • Teach Pendant (10m cable to controller) Interfaces: • RS232 • 2x Ethernet (separately confi ...

DH Robotics AG-95 Gripper Weight: 1000 g Payload: 3000 g With a stroke of 95mm, the DH Robotics AG-95 gripper is an adaptable and versatile two-finger solution that can handle a wide range of object shapes and sizes. This adaptability allows the user to avoid having to install new grippers when the application (or manipulated object) changes. Designed from the ground up for collaborative solutions, the DH Robotics AG-95 comes with ready-to-use plugins for most major cobot brands (Universal Robots, OMRON, Hanwha, etc.). Discover how this advanced yet affordable gripper from DH Robotics can change the way you work! Properties The DH Robotics AG-95 is an adaptive two-finger gripping solution, offering advanced, adaptive gripping at an affordable price. With a recommended payload of 3kg and a stroke of 95mm, the DH Robotics AG-95 offers considerable versatility in terms of ob ...

DH Robotics AG-145 Weight: 1300 g Payload: 2000 g With a stroke of 140mm, the DH Robotics AG-145 gripper is an adaptable and versatile two-finger solution that can handle a wide range of object shapes and sizes. This adaptability allows the user to avoid having to install new grippers when the application (or manipulated object) changes. Designed from the ground up for collaborative solutions, the DH Robotics AG-145 comes with ready-to-use plugins for most major cobot brands (Universal Robots, OMRON, Hanwha, etc.). Discover how this advanced yet affordable gripper from DH Robotics can change the way you work! Properties The DH Robotics AG-145 is an adaptive two-finger gripping solution, offering advanced, adaptive gripping at an affordable price. With a recommended payload of 2kg and a stroke of 140mm, the DH Robotics AG-145 offers considerable versatility in terms of obj ...

DH Robotics DH-3 Adaptive Gripper Weight: 1680 g Payload: 1800 g With a stroke of 106 mm and a recommended payload of 1.6 kg, the DH Robotics DH-3 offers a robust and easy-to-use three-finger gripping solution. This advanced gripper offers a wide range of possible handles, a self-locking system in the event of a power failure, and impressive precision and control. Intuitive to use and easy to set up, the DH Robotics offers plug-ins for Universal Robots, OMRON, and more. The DH-3 is ideal for demanding manufacturing areas as well as laboratory and research environments. Properties The DH Robotics DH-3 is an advanced three-finger gripper designed with precision and affordability in mind. In developing the DH-3, DH Robotics tried to solve two of the main problems with adaptive three-finger grippers: the high cost and the fact that they are relatively difficult to use. With t ...

DH Robotics PGC-50 Gripper Weight: 500 g Payload: 1000 g With a stroke of 35 mm and a payload of 1 kg, the DH Robotics PGC-50 is designed to combine intuitive design with practicality. With its impressive accuracy, self-locking and a host of other features, the PGC-50 is the perfect gripper for lightweight collaborative applications. The PGC-50 is easy to set up and comes with plug-ins for most major cobot brands such as Universal Robots, OMRON, etc. Properties The DH Robotics PGC-50 is a two-finger electric gripper designed for both industrial and collaborative applications. The award-winning PGC-50 gripper (Red Dot Award, IF Award) combines progressive design with proven reliability. The PGC-50 offers a stroke of 35 mm and a recommended payload of 1 kg. With its self-locking function, maximum force limits and other collaboration-oriented features, the DH Robotics PGC-50 ...

Information: - Bottom and side panels made of S235JR - Side cutting edge 10 mm - Knife 110 x 12 mm made of HB 500 - High-quality paintwork (primed/varnished) - Water drainage holes - Economical bucket geometry for effortless penetration (taper per side 2°) - Transport hook for easy transport - Inner hoses to the cylinder - Cylinder protection - All moving parts are equipped with grease nipples - Hydraulic connections 12 L / M18 - Incl. 1 pair of hydraulic hoses 140 cm Model GH-Flex-80 Recording MS03 Symlock Working width 800 mm Opening dimension 310 mm Depth approx. 400 mm Weight 73kg Volume (SAE) 65L Swivel angle 2x 45° Swivel cylinder (KRAMP) 1 piece Base body made of S235JR Cutting edge 110/12-from HB 500 Colour: Black satin

Information: - Extra stable design - Laser cut - Extra reinforced side jaws - Robot welded - Narrow multi-edging of the back elements - Knife and side cutting: Tempered to:470-530 HB - Bucket safety element on the holder for easy - construction site transport - MADE IN GERMANY (welding with calibrated welding machines, DIN 1090 certified welding company.) Recording MS03 Width 300 mm Height 400 mm Volume 32 l Weight 51 kg Model SIT-pro 300

Producer: Fritsch Condition: RENOVATED Made in Germany Description This Fritsch Line includes Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year

We sell 1 x IBM 2098-E10 z10 BC zSeries System 1 x IBM 2965-N10 z13 Series System Capacity Marker: E01 1 x IBM zSeries BC12, 2828-H06/I02 We will also have various other zSeries systems available, like IBM z15, and more Please also contact us if you are interested in high-end tape libraries. Various items are available. In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade ...