Parallel lathe NILES DLZ 400 IV Between points: 1000 mm Maxi Ø on bench: 420 mm Maxi Ø over saddle: 225 mm Spindle diameter: Ø 52 mm Spindle speed: from 45 to 2240 RPM 3-jaws chuck Ø 250 mm (interchangeable jaws) Threadings: Metric + Whitworth Tailstock: CM5 Rapid on X Lubricant pump Voltage: 380 V Length: 3000 mm Depth: 1500 mm Total height: 1600 mm Weight: approx 2,5 T
Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...
Vertical Lathe WMW NILES DMF 6300 Condition: Very good, complete Technical details: Turning diameter: 6300 mm Turning diameter, with side-support: 6000 mm Degrees displacement of the vert. supports: +/-30 ° Displacement of the side-support: 1800 mm Workpiece height max. : 2500 mm Workpieceweight max. : 50000 kg Chuck diameter: 5300 mm Speedrange: 0.35-14 rpm Feeding speeds (16): 0.063-11.2 mm/omw. Rapid speed of the supports: 1000 mm/min ¬ ¹ Rapid speed of the side-support: 500 mm/min ¬ ¹ Connection power: 120 kW Dimensions of the machine W: 14.40 x 8.20 x 8.70 m Weight of the machine ca.: 174.000 kg
BRAND: NILES YEAR: 1988 MODEL: DFS2-2 APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FAGOR MAIN DRIVE SPINDLE SPEED RANGE: 4000 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 12-FOLD TOOL CARRIER - HARDENED GUIDEWAYS - STANDARD ACCESSORIES - UP CATALOG - AIR FILTER FOR DC MOTOR - ADDITIONAL EQUIPMENT ACCORDING TO B1. 2/3 - THREE-PHASE CURRENT - OPERATING VOLTAGE 380 VOLT - FREQUENCY 50 HZ - DC
turning diameter: 315 mm turning length: 1000 mm control: Siemens type: Sinumerik 802 D turning diameter over slide: 160 mm spindle hollow: 52 mm Tool changer: 12 turning speeds: 30-3300 U/min chip conveyor: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 800 mm turning length: 4500 mm control: Siemens workpiece weight: 4000 kg Revolutions milling spindle: 1-5500 U/min milling spindle: HSk 100 type: 840 D positioning accuracy: 0,01 ° Torque: 3000 Nm transmission ratio: 2 turning speeds: 2430 U/min main drive: 77 kW steady: SMW Diameter: 140-510 mm coolant capacity: 980 l coolant pump: 80 Bar paper filter: 3-jaw-chuck diameter: 610 mm tail stock: Tool changer: swing diameter: 1100 mm total power requirement: kW weight of the machine ca.: 52 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 2000 mm gear width: . mm max. module: 22 max. hob diameter: 250 mm hob turning speeds: 16-92 U/min total power requirement: 13 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-jaw-chuck diameter: 630 mm turning diameter over slide rest: 650 mm turning length: 500 mm turning dia. in gap: 1420 mm digital readout: Mitutoyo turning speeds: 3,55-710 U/min total power requirement: 24 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 850 mm turning length: 6100 mm control: Siemens type: 840 D turning diameter over slide: 570 mm Tool changer: 12 Pos turning speeds: U/min chip conveyor: 3-jaw-chuck diameter: 600 mm total power requirement: kW weight of the machine ca.: 17 t dimensions of the machine ca.: 12x2x2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 4000 mm turning diameter over slide rest: . mm turning length: 5000 mm total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: - mm table width: - mm grinding wheel diameter: 400 mm max. width of grinding wheel: 50 mm total power requirement: 1,5 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1 x 1 x 1 m For Pre-Dressing the Gear Grinding Wheels apart from the machine, particularly to profile grinding wheels for two-flank grinding, module 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: 45 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Numeriksteuerung CNC 700 K total power requirement:28 KVA weight of the machine ca.:7,8 t dimensions of the machine ca.:6610 x 2280 x 2235 mm work height max.:1060 mm greates pass round over bed:305 mm spindle bore:82 mm Documents:vorhanden
Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 10x available -Weight: 0.9 kg
Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Price: per piece -Number: 40x available -Weight: 0.6 kg
Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 50x available -Weight: 0.9 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 50 mm -Outer: Ø 200 mm -Width: 40 mm -Price: per piece -Number: 14x available -Weight: 2.1 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Number: 7x discs available -Price: per piece -Weight: 1.9 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Price: per piece -Number: 8x available -Weight: 2.2 kg
Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel 20 Jot - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Weight: 1.3 kg
Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Number: 2x discs available -Price per piece -Weight: 1.4 kg/pc.
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Number: 2x discs available -Price: per piece -Minimum purchase: complete -Weight: 0.6 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Number: 9x discs available -Price: per piece -Weight: 0.4 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 32 mm -Number: 1x discs available -Price: per piece -Weight: 3 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 19 mm -Number: 1x discs available -Price: per piece -Weight: 1.2 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 32 mm -Number: 1x discs available -Price: per piece -Weight: 2.1 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 20 mm -Number: 1x discs available -Price: per piece -Weight: 1.3 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 25 mm -Number: 3x discs available -Price: per piece -Weight: 1.9 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 30 mm -Number: 9x discs available -Price: per piece -Weight: 1.8 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 30 mm -Number: 6x discs available -Price: per piece -Weight: 1.8 kg
Niles brand german mali borverk bench x : 1600 mm y : 1600 mm z : 1800 mm Turntable works flawlessly. gear sets bronze nut all maintenance is done. It has an opening mirror. counter bed is available. The opposite bed was sandblasted and painted for cleaning. it is well maintained. There is no non-working place in the electrical unit. the machine is about 20 tons 11 tons of material was processed on the table before. By producing the apparatus, it can be processed with a chuck that opens pipes up to q 1800 mm diameter. gasket surface can be opened to flanges.
NILES lathe turning diameter approx. 700 mm turning length 1000 mm including new measurement. The machine is in good technical condition, it is possible to test it by agreement.
Manufacturer Niles Model ZSTZ 1250 Year 1986 Maximum wheel diameter : 1250 mm Module + : 30
Turning diameter: 1300 mm Turning length: 4500 mm Turret positions: 1 Positions ATC: 142 Number controlled axis: 7 CNC Brand: Siemens CNC Model: 840D NILES SIMMONS N50/2 MC TURN MILL DRILL MACHINING Make : NILES SIMMONS Germany Typ &nbs p; : N 50 / 2 MC x 4500 Age &nbs p; : 2008 Swing over slide : 1.250 Swing over bed : 1.300 DBC turning length : 4.500 Spindle bore &nb ...