used NOW for sale

Product name: Compressor Manufacturer: Kaeser Type: EPC 340-100 Article number: 1.5746.7 Year of construction: 2011 Condition: in good used condition, checked technical details: operating pressure: 10 bar • Delivery quantity: 230 l/min (6 bar) • Speed: 1,500 rpm • Container: 90 l • Weight: 73 kg without consoles (per console 15.0 kg) • Sound pressure level dB(A): 73 Engine data: • Motor: 400 V, 1.7 kW Metrics: L x W x H: 1,120 x 350 x 910 mm Transport dimensions: • L x W x H: approx. 1,200 x 800 x 1100 mm • Transport on pallet: 1,200 x 800 mm Our price: 839,00 € (EUR) FP plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

Renner compressed air tank Product description: Compressed air tank lying down Manufacturer: Renner SKU: 02280 Built: 2018 Condition: New device technical details: • Volume: 90 litres • max pressure: 11 bar • Compressed air output: G1 inches • Weight: 36 kg • powder-coated outside • Tmax: 100°C • Pieces: 4 pieces in stock High-quality compressed air tank Made in Germany (BWB container factory), with test certificate. metrics: • L x W x H: 970 x 290 x 410 mm Our price: 249,00 € (EUR) FP plus VAT from the grunow location (Brandenburg) (Changes and errors to technical data and prices reserved!)

PUTSCH panel saw Product Name: Putsch Panel Saw Type: SVP 420 M Machine number: S-420-10.420.013 Condition : New device Technical details: • max. cutting length: 4,200 mm • max. cutting height: 2,200 mm • highest horizontal cut: 2,080 mm • max. cutting depth: 60 mm • Connection for suction: 100 mm diameter • Engine power: 5 hp/3.75 kW • Saw blade speed: 5,300 rpm • Saw blade diameter: 250 mm • Dimensions: L x W x H = 5,750 x 1,400 x 3,150 mm • Weight: approx. 1,000 kg Transport dimensions: L x W x H 1st box 1,150 x 3,100 x 1,200 mm 2nd box 5,300 x 150 x 235 mm Number of packaging units: 2 • the model series 420 is particularly suitable for continuous use in confined spaces • electr. driven, automatic shifterost • swung away center support for narrow workpieces • sliding system  ...

Gold – Inserts System Tools Box window set Product Name: Inserts Manufacturer: Gold Werkzeuge GmbH Condition: used For the production of profiled single or box windows Slotting tools - Indexable insert version HW(HM) - Z-2 - Zero diameter 300 mm - BG test - screwed to precision threaded bushings 50/40 mm Longitudinal tools - with zero – diameter 111.5 mm Tool set consisting of: 1x slot set for frame 1x pin set for frame pins on top 1x cone set for frame frames at the bottom 1x inner profile set for glare frames inside side and top 1x inner profile set for frame inside bottom 1x inner profile set for wings inside all around 1x slot set for grand pianos 1x cone set for wings 1x outer profile set for wings all around 1x outer profile set for wings - middle seam Price: 3.750,00 € plus VAT from location Grunow (Brandenburg) Shipping is of  ...

Environmental technology Kreisel Krauschwitz - Rotary valve Product name: Rotary valve Manufacturer: Umwelttechnik Kreisel Krauschwitz Type: ANG 200-11-12 Z (RF47) Year of construction: 2006 Machine number: 61614 Condition: used Inlet opening: 200 x 200 mm Outlet opening: 200 x 200 mm Cell depth: 60 mm Cell width: 200 mm Cell wall: 8 mm Number of cells: 8 Engine: SEW-EURODRIVE Type: RF47 DT71D4/TF RPM: 1380/12 Power: 0.37 kW Voltage: 230/400 V Protection class: IP55 Machine size: 850mm x 300mm x 300mm (L x W x H) Transport dimensions: 1,200mm x 800mm x 450mm (L x W x H) on pallet Number of packaging units: 1 Weight: approx. 100 kg on disposable pallet The rotary valve was completely refurbished, checked and tested for function in our company. Price: 1.390,00 € (VB) plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regar ...

SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...

Renner piston compressor RIKO 700/270 ST KT Product name: Piston compressor Model: RIKO 700/270 ST-KT Manufacturer: RENNER Device Number: 1008851 Product number: 04837 Year of construction: 2021 Condition: As good as new technical details: Effective delivery quantity: 570 Container capacity: 270 Ltr. Intake capacity: 700 l/min Maximum pressure: 10 bar Sound pressure level LpA: 78 dB(A) Cylinders/steps: 2/2 Weight: 227 kg Temperature range: -10°C to +80°C 1 x pressure gauge tank pressure automatic pressure switch 1 x manual condensate drain by ball valve incl. refrigeration compressed air dryer RKT +0035 (refrigerant 134a) incl. automatic steam trap D03 for the compressor Stand-standing unit with rubber feet Engine data: Motor power: 4.0 KW Power supply: 400 V / 50 Hz Speed: 940 rpm Transport dimensions: L x W x H: 1,490 mm x 506 mm x 1,323  ...

Holzkraft SCM thickness planer S 52ES Product name: Thickness planer Model: S 52ES Type: SP-03 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: KK00019806 Year of construction: 2021 Condition: as good as new technical details: - Work table size: 850 x 520 mm - Useful width: 520 mm - max. chip removal per operation: 5 mm - Knife shaft diameter: 120 mm - Number of knives: 30x3x520 / 4 pieces - Knife shaft speed: 5,200 rpm - Holding time knife shaft: less than 10 sec - Feed speed during thickness planing: 5 - 8 - 12 - 18 m/min - Diameter of the extraction hood (plastic): 120 mm - required speed of the extraction air: dry chips = 20 m/sec, wet chips = 28 m/sec - Consumption of extraction air [diameter 120 mm]: 814 m³/h dry chips, 1,140 m³/h wet chips workpiece height: 240 mm workpiece width: 520 mm - min. workpiece height: 3.0 mm - min. workpiece length:  ...

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...

technical details of the dressing planer: - Planing width: 310 mm - Total length of the planing tables: 1,400 mm - Diameter of the knife block: 70 mm - TERSA planing knife shaft - Number of knives: 3 - Knife dimensions: 310 x 25 x 3 mm - Rotation speed of the knife shaft: 5,500 rpm - Dimensions of the dressing stop: 1,300 x 150 mm - Swivel range of the dressing stop: 90° - 45° - Maximum cutting depth: 4 mm technical details of the thickness planer: - Dimensions of the thickness planer table: 430 x 310 mm - Capacity height of the thickness planer: 230 mm - Diameter of feed rollers: 30 mm - Maximum cutting depth: 4 mm - Feed speed: 6m/min - Handwheel with analog display for height adjustment - Diameter connection dust extraction: 100 mm - Weight: 280 kg Engine data: - Voltage: 400 V - Engine power: 3.72 kW / 5 hp Transport dimensions (W x D x H): 1,590 x 85 ...

unicraft Generator PG 800 TRA Product Name: Synchronous Generator Type: PG 800 TRA Manufacturer: unicraft Item number: 6701083 Year of construction: 2021 Condition: New technical details drive: - Drive motor: Honda GX390 - Starter: Hand start (wire rope hoist) - Fuel type: Petrol - Tank capacity: 11 liters - Consumption at 75% load: 2.2 l/h - Sound pressure level (Lp): 72 dB(A) - Sound power level (Lw): 97 dB(A) technical details power generators: - Type: nsm-ZR100-SC Synchronous - Rated voltage: 230 / 400 V - Apparent power at LTP: 5500 / 8300 VA - Active power at LTP: 4.9 / 6.6 kW - Apparent power at COP: 4100 / 7000 VA - Active power at COP: 3.7 / 5.6 kW - Protection class of the generator: IP 23 - Sockets: 1 x 230 V Schuko, 16 A / 1 x 400 V, 16 A - Protection class of the sockets: IP 44 - short-term power up to 3 times the rated power possible (LTP = ...

Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm  ...

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

Scheppach – Roller screen RS 400 Name: Roller screen Manufacturer: Scheppach Type: RS 400 Article number: 42030000 Condition: Brand new The roll screen 400 does not let anything pass through that seems too coarse. It refines large quantities of different materials. The adjustable angle of inclination of the screening drum facilitates the screening of a wide variety of materials. - suitable for a wide variety of materials - Screen drum: Ø 400 mm, length 900 mm - Drum inclination adjustable in steps: 0-10 ° degrees - Mesh size: Ø 20 mm - Standard screen insert with mesh size 10 mm - Screen drum speed 42 rpm - Capacity: depending on the material 3m³/h Engine data: Voltage: 230V / (50Hz) Motor power: 360 W Machine dimensions (L x W x H): 1,060 x 710 x 1,400 mm Transport dimensions (L x W x H): 500 x 1,040 x 880 mm Number of packaging units: 1 carton  ...

NILFISK- Mobile cold water high-pressure cleaner-MC 2C-150/650 XT (POSEIDON 2-29 XT) Product Name: Mobile cold water pressure washer Type: MC 2C-150/650 XT (POSEIDON 2-29 XT) Manufacturer: Nilfisk Item number: 128470138 Year of construction: 2020 Condition: Brand new technical details: - Brass cylinder head - 3 x ceramic coated pistons - Automatic start/stop for long service life - Water volume regulation - Universal Plus lance with 4-in-1 nozzle - Steel-reinforced high-pressure hose - Removable 2 l detergent tank - Pressure: 150 bar - Pump speed: 2,800 rpm - Suction height (filled): 0.5 m - Cleaning effect: 2.9 kg/f - Water capacity qmax: 650/570 l/h - inlet temperature: 60 °C - electrical connection values: 230 V/1-phase/50 Hz/14.5 A - Power consumption: 3.3 kW - 5 m power cord - Hose DN6 15M on hose reel - Nozzle size: .0370 - integrated HD detergen ...

Name: Glass cutter Type: Silver cut No. 550.0 Manufacturer: Bohle-Werkzeugfabrik Condition: used Components: - 1 x base cross (complete with 2 x suction cup, base rail, cross rail) - 4 x clamping piece with suction cup - 4 x extension rail 100 mm - 2 x extension rail 200 mm - 1 x cutting ruler - 1 x slider for small ellipses - 1 x slider for large ellipses - 1 x silver cut glass cutter no. 425.1 with ball-bearing wheel carrier Note: There are no 400 mm extension rails included! Application: - for circular and elliptical cut-outs made of glass plates Original price: 380,00 € tax excl. Price: 239,00 € (VB) plus VAT ex location Grunow (Brandenburg) (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted. ...

Quick Frame Alpha 4 (Italy) Product name: Quick Frame Model: Alpha 4 Manufacturer: Alfamacchine (Italy) Sales: Bohle AG Serial no.: 46096 Year of construction: 2003 Condition: Used and tested technical details: for making picture frames Weight: 36 kg with foot switch for hardwood (oak), medium hard wood (ramin), softwood (pine, pine) necessary working pressure: 4 - 7 bar Pressure gauges Manual adjustment for working pressure incl. compressor (SIL. AIR, Italy) Operating instructions Spare parts list incl. bracket assortment (photo) Compressor data (SIL. AIR 30-9) Tank capacity: 9 L Flow rate: 50 L/min Pressure: 8 bar (adjustable) Year of construction: 06/1991 Voltage: 230 V Current: 2.4 A Power: 340 W incl. connection hose Device dimensions (L x W x H): 560 x 300 x 400 mm Our price: Quick frame: 890,00 € (EUR) FP plus VAT ex Grunow (Brande ...

C.W. Kreher Söhne KG slotted hole drilling machine LBFM Product name: Slotted hole drilling machine Type: LBFM I and II Manufacturer: C.W. Kreher Söhne KG Machine number: 4638 Year of construction: 1963 Condition: used, revised, checked Technical details: • Table size: 600 x 250 mm • Absorption sizes of the two-jaw chuck: • max. drilling depth: 160 mm • Max. travel in width: 200 mm • Height adjustment: 200 mm • Max. speed: by flipping the belts 2 speeds: 1,500 rpm and 2,800 rpm • Stop for 2 drilling depths • Clamping device: mechanical hold-down devices • V-belt dimensions: 15 mm x 970 mm • Weight: approx. 500 kg Special features: Instruction manual available Engine data: • Voltage: 380 V •Turn: • Current: 6.1 A • Power: 1.6 kW Machine dimensions (L x W x H): 1,200 x 1250 x 1450 mm Transport  ...

Bütfering Wide belt sanding machine FBS 800 Product name: Wide belt grinding machine Type: FBS 800 Manufacturer: Gebrüder Bütfering Machine number: 83221 Year of construction: 1983 Condition: Used Technical details: - for solid wood - Grinding width: 800 mm - Strap width: 810 mm - Band length: 1,900 mm - Workpiece thickness: max. 90 mm - Feed speed: 10 and 20 m/min - Power requirement sanding belt drive: 15hp optional 20 hp - Feed drive: 1/1.5 hp - Cleaning brush: 0.75 hp - Weight: approx. 1,800 kg - Cleaning brush on the spout side (2x) - pneumatic belt tensioning Engine data: - Voltage: 380 V (note the direction of travel) - Current: A 2.8 / 22.4 - Power: 1.1 / 11.0 kW - Revolution: 1450 / U1=2,800, U2=3,060 Suction: - 3 x suction nozzles: diameter 140 mm, 160 mm, 200 mm Retrofitting/reassembly of a small table for acc ...

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally stiff shell construction • Er ...

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Serial Number: 121098013092 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally sti ...

Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Hoffmann frame and slotted hole drilling machine Product name: Frame and slotted hole drilling machine Type: HR 150 Manufacturer: Hoffmann Bohrsysteme Machine number: 15306 Year of construction: 1996 Condition: used, revised, checked Technical details: - Machine height: 1,260 mm - Machine length: 1,100 mm - Machine depth: 1,300 mm - Workpiece support: 1,100 x 240 mm - Workpiece clamping: pneumatic via foot valve - max. clamping height: 150 mm (standard) - Stroke of the clamping cylinders: 10 mm - Drilling plane adjustment (Z-axis): 100 mm (pneumatic) - Drilling stroke (Y-axis): 150 mm - lateral adjustment range of the drilling unit (x-axis): 330 mm - Drill holder: Special chuck with 2 tool change inserts (1x M10 and 1x 1600) - Drill with centering tip: - 2 pieces 8 x 50 mm, 1 piece 12 x 80 mm, 1 piece slotted hole drill 8 x 20 mm - Drill speed: 2,850 rpm -  ...

JAROMA DYFD-2 combined milling machine/saw Product name: Milling machine Type: DYDF-2 Manufacturer: JAROMA (Poland) Machine number: 3814 Year of construction: 1982 Condition: used, checked Technical details: - Spindle diameter: 25 mm - usable height (spindle height): 110 mm - Spindle inclination: 5° in both directions - Table dimensions: 1,120 x 750 mm - 2 x suction nozzles, diameter 100 mm - 1 x additional 380 V connection for a feed - Spindle height and inclination can be adjusted manually - removable drawer for cleaning - Machine dimensions (set-up) L x W x H): 1,120 x 830 x 1,100 mm Engine data: - Voltage: 380 V - Frequency: 50 Hz - Power: 3.8 / 3.0 kW - Speeds: 2,900 / 1445 rpm (2 speeds) Transport dimensions (L x W x H): 1,200 x 840 x 1,220 mm (on EURO pallet) - Number of packaging units: 1 - Weight: approx. 700 kg The machine has been overhauled  ...

Maka V250 - Multi-blade saw Product name: Multi-blade saw Type: V250 Manafacture: Maka Machine number: 31209 Year of construction: 2010 Condition: used, revised and checked Technical details: - max. cutting thickness: 110 mm - Width of the transport carpet: 250 mm - min. length workpiece: 280 mm (with a special wooden pressure shoe - 1x available as a sample) - Length of the workpieces to be machined: 560 mm - Feed speed of the transport carpet: 0-36 m/min - Max. throughput width: 680 mm - Height of the work table from the floor: 780 mm - Diameter of the suction opening: 250 mm - Weight: approx. 1,700 kg Engine data: - Total power: 18 kW - Voltage: 400 V - Current: 34 A - Speed: 2,930 / 3,515 rpm Machine dimensions/set-up dimensions (L x W x H): 2,750 x 1,790 x 1,850 mm - Number of packaging units: 1 - Weight: approx. 1,700 kg standard accessory: - 1 pie ...

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,800 rpm Machine dimensions (set-up dimensions) L x W x H: 2,600 x 1,200 x 1,050 mm Transport dimensions (L x W x H): 2,700 x 1,200 x 1,200 mm (on pallet) - Number o ...

aircraft piston compressor Mobilboy 301/50 AC Product name: Reciprocating compressor Mobilboy 301/50 AC Manufacturer: Aircraft Item number: 2004304 Year of construction: 2023 Condition: New device Technical details: • Maximum flow rate: max. 240 l/min • Hopper volume: 50 l • Filling capacity: approx. 150 l/min • Maximum pressure: 10 bar • Sound power level Lw: 96 dB(A) • Cylinders/Stages: 1/1 • Weight: 36.5 kg • a one-hand quick coupling • One pressure gauge each for working pressure and container pressure •Reducer • Powder-coated boiler • Automatic pressure switch • Connection cable length: 1.8 m Engine data: • Power drive motor: 1.5 kW • Power supply: 230 V / 50 Hz • Speed: 2850 min-1 Transport dimensions: • L x W x H: 790 x 330 x 725 mm Our price: €229.00 (EUR) plus VAT from Grunow (Brandenburg) (Subject to  ...

Product name: Feeder VSA 2048L Manufacturer: Holzkraft Item number: 5119048 Condition: Brand new Technical details: • max. projection: 1050 mm • Number of PU feed rollers: 4 • Roll diameter: 120 mm • Roll width: 60 mm • Wheel travel: 20 mm • 2-speed transmission • 8 x speeds: 2/4/5.5/6.5/11/13/16.5/33 m/min • Motor power 50 HZ: 0.75 kW • Voltage: 400 V • Weight: 73.5 kg (incl. tripod) • Right-left rotation • Individual adjustment options in vertical and horizontal position for optimal feed •Metal casing • without counter for height adjustment • Dimensions (L x W x H): 1,665 x 220 x 540 mm Price: €1,090.00 (EUR) plus VAT ex Grunow (Brandenburg) Of course, shipping is possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!)  ...

Emergency generator Equipment-No. 1000804494 Manufacturer: IVECO Type designation: 8361 SRJ 2605 Manufacturer part no.: 018262 Year of construction: 1993 Output AC voltage: 230V / 400V Type of installation: encapsulated Type of technique: water-cooled contractual. Power supply: 160 kVA Fuel capacity: 2,000 l Soundproofing cladding: 230 V / 400 V The unit is disassembled and prepared for transport. Price: € 11,500.00 (EUR) plus VAT ex Grunow (Brandenburg) Of course, shipping is possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Band saw 400 mm Product Name: Band Saw Type: Model 402 Manufacturer: Country Bulgaria Serial number: 1594 Year of construction: 1980 Condition: used, completely refurbished Technical details: - Table size: 630 x 630 mm - Table inclination: approx. 30° - Cutting height: approx. 220 mm - Cutting width without stop: 380 mm - Saw blade guide with one back roller each at the top and bottom - Belt length: 3,015 mm - Roll diameter: 400 mm - Diameter of suction nozzle: 80 mm -Incl. 2 pieces of saw blades - 10 mm for plastic 1 piece of saw blade – 12 mm for wood 14 saw blades – 18 mm for wood - no stop available ! Engine data: - 380 V / 50 Hz / 2.5 A (see nameplate!) - Power: 1.1 kW - Speed: 1410 rpm Transport dimensions: - Width: 1,050 mm, Depth: 640 mm, Height: 1,850 mm - Transport dimensions (L x W x H): 1,200 x 800 x 2,020, stored on E ...

High Quality CNC Lathe Traub TND 360 We offer a precision CNC lathe from the renowned Traub brand. The Traub TND 360 was manufactured in 1981 and allows for efficient and accurate machining, which meets current requirements Technical details: - Diameter: 360 mm - Turning length: 800 mm - Tailstock: MT 3, hydraulically operated - Revolver: 8 stations - Power consumption: 380V, 32 kW This CNC lathe stands out for its reliability and precision, allowing versatile machining of workpieces. The machine needs an inspection due to an unknown problem in the control system. It is also in very good condition and has been regularly maintained. The price is net, free to load. The Traub TND 360 can be viewed by prior appointment. If you have any questions, just call or write. 016096679844 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Technical specificat ...

Thermal Oil Tunnel Furnace Power max.: 465 kW permissible operating pressure: 2 bar Test pressure: 5 bar Volume / per plate: 2800 / 45 dm³ permissible max. temperature: 300 °C Heat transfer fluid: DEA / DEACAL HT 22 Burner: Weishaupt Burner Type: G3/1-E Burner version: ZMD Burner power: 90 - 630 kW Gas Type: N Burner connection pressure min/max.: 15 / 200 mbar Condition: in working order Availability: as of now

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

We have large stock of now OEM-obsolete used mechanical spare parts and electric / electronic parts for KHS, Kisters and ZVT tray- and shrinkpacking machines. Including AEG DPW 101/102, Kisters PC09 / Kisters PC20 / Kisters PC30 / Kisters PC40, and Indramat servo drives and controllers, Mayr Primo servo controllers. Details upon request. MAC 71C-0-JS-4-C/95-A-0/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-0/WI504LX/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LX/S001 MAC112B-0-GD-4-C/180-A-0/WI504LV/S011 MAC112B-0-GD-4-C/180-A-0/WI504LX/S011 Mayr Primo 2 + am 1 type P22.004.0 Mayr Primo Compact type P21.004.0 TR Electronic AE100S / HE100S / CS100S Bosch Rexroth PPC controllers including PPC-R02.2N-N-NN-P2-NN-FW, PPC-R02.2N-N-V2-NN-NN-FW and PPC-R22.1. For most of these units we can also provide FW up- / down-load / copy service. (including on-site).

1 used shrink tunnel, made ZVT (now KHS), type ST/II-600DG. Built in 1995. With belt braiding tape (for untabivalent products such as PET bottles). Total length 6,000 mm. Passage 570 mm High x 400 mm wide. E-connection 415V (x5%) / 50 Hz. Top condition (belt recently renewed!). Operator side: right or left. (2 machines available).

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 16-320A Engine No.: in production Power: 481 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 D Gene. No.: in production Generator power: 550 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.900 Height approx. mm: 2.550 Leng ...

Many thanks for your interest in our second-hand machinery, please find below our offer: manufacturer: Ulma foilwrapper Type: DH 2 identical with Sapal PRLP year: unknown output: 90-130 Stck. pcs/min format size: min. 20 x 15 x 6 mm (lxwxh) max. 55 x 35 x 15 mm (lxwxh) Enginepower: 1 HP electrical: 220/380 V; 3 ph; 50 Hz dimensions: 2050 x 1420 x 1240 mm weight: ca. 1135 kg different: Suitable for 4/5 grm, diam. approx. 19/20 mm chocolate bonbons Pralie wrapper with alufoil from the reel, brush folding The Ulma DH2 Praline wrapper is identical with Sapal PRLP The machine was bought by the previous owner in rebuilt condition, but hardly used and treated very carefully. top condition We offer this machine in 'as is' condition, without warranty, ex warehouse/location (Incoterms EXW and without packaging. ex Stock Hess. Lichtenau germany, (EXW) unpack ...

Shelves for shelving are now available for sale. The shelves measure 100 x 60 x 4cm. In addition, these are also available in larger quantities

DAMET DS-3519-E Compressed Air - Carton Lid Stapler is hereby offered for sale. The items work perfectly and have been regularly maintained. -Tool Type: Pneumatic -Magazine capacity: 100 -Working pressure: 4.9 - 7.1 bar / 71 - 103 PSI -Air consumption: 1.13 liters per shot at 5.6 bar -Compressed Air Connection Thread Type: 1/4 BSP -Dimensions (L x W x H): 345 x 115 x 233mm -Weight: 2.45kg - Diameter: Min. 0.8mm / Max. 2.25mm -Length: Min. 15mm / Max. 19mm -for the following staples: 35 / JK560 / Prebena B / BeA Packfix A / Senco XB Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise st ...

approx. 900 pieces, Fast Food Tray (trays) incl. 1 transport trolley - used - : Price (only complete acceptance) from location: only 1.500.- € (net)! Incl. transport trolley that always keeps the trays at the same height! Trolley: Manufacturer: Blanko Kind. Item #: 00572183 Year of construction: 2013 Width: approx. 53cm x approx. 38cm Height: approx. 78cm Tray: Manufacturer: Hendi Type: Fast Food Tray (Trays) Year of construction: unknown Dimensions: 350x450x(h)20 Suitable for dishwashers Material PP Original price: approx. 6.-€ (net) / piece Condition: good Available: from now on Location: Frankenberg / Saxony

Shelf shelves, plug-in system, manufacturer dalminels, 1,30m x 0,60m (other dimensions available), frame height 2,20m (other heights available) – new - : Price per base field: 129.-€ (net)! Price per cultivation field: 109.-€ (net)! Acceptance only by truck, otherwise the transport costs are likely to be too high in relation to it! Approx. 300 – 350 fields can fit per truck (depending on the configuration) manufacturer: dalminels, Italy Type: Errex Year of construction: New! Galvanized Frame height approx. 2.20m (other heights e.g. 2m on request)! Payload per level: 141kg 5 floors per field – additional soils for an extra charge Shelves: approx. 1.30m x 0.60m (the floors consist of 3 sheets at a depth of 20cm) In this system, the floors on the sides are plugged into a rail. Condition: New Available: Delivery time: approx. 8 weeks, but usually faster,  ...

Shelf shelves, plug-in system, manufacturer dalminels, 1,30m x 0,60m (other dimensions available), frame height 2,20m (other heights available) – new - : Price per base field: 129.-€ (net)! Price per cultivation field: 109.-€ (net)! Acceptance only by truck, otherwise the transport costs are likely to be too high in relation to it! Approx. 300 – 350 fields can fit per truck (depending on the configuration) manufacturer: dalminels, Italy Type: Errex Year of construction: New! Galvanized Frame height approx. 2.20m (other heights e.g. 2m on request)! Payload per level: 141kg 5 floors per field – additional soils for an extra charge Shelves: approx. 1.30m x 0.60m (the floors consist of 3 sheets at a depth of 20cm) In this system, the floors on the sides are plugged into a rail. Condition: New Available: Delivery time: approx. 8 weeks, but usually faster,  ...

approx. 500 fields shelves, SSI Schäfer R3000, 1.30m x 0.61m, frame height up to approx. 2.28m – frame new, shelves used - : Price per field: 99.-€ (net)! We reserve a minimum purchase quantity! Manufacturer: SSI Schäfer Type: R3000, Year of manuf.: 2007, frame new! Frame height approx. 2.28m (other heights on request)! The frames are NEW Shelf dimensions in special size: 1.28 x 0.61m (normally the shelves are 0.60m deep) Field depth: 0,62m 5 shelves per field (additional floors available at extra cost) Payload per floor at least 100kg, rather 150kg per floor Side frame: open (not closed as seen in the photos) Available are: approx. 2,500 floors approx. 22,000 slip-through devices (purchase possible at an additional cost) approx. 80 shelves per pallet Condition: good Available: from now on (delivery time of the frames on request! Location: Frankenberg wa ...

Pick by Voice System, Honeywell, A500 and A720 - used - : Prices per piece ex location: A500: 1.250.-€ (net) A720: 1.450.-€ (net) Price for complete acceptance: 15.000.-€ (net) then incl. all spare parts such as batteries, carrying straps, spare attachments for the ear cups and microphones etc. Manufacturer: Honeywell Type: A500 – 13 pieces Type: A720 (newer model) – 5 pieces Original price per system approx. 3.600.-€ (net) Each set includes one device with 1 pair of headphones Condition: very good Available: from now on D-64859 Eppertshausen

2 pieces low-stroke order picker, Linde N20, with long forks - used - : Price per piece ex location: Device No. 7: 3.500.-€ (net) Device No. 5: 3.500.-€ (net) Manufacturer: Linde Type: N20 Fork length: approx. 2.34m (for two pallets in a row) Width forks: approx. 50cm Total length: approx. 2,80m Device width: approx. 73cm Nominal load capacity: 2.000kg Empty weight: approx. 530kg, or 630kg, Battery voltage: 24V 3kW Battery weight: between 305 and 365kg, or 400kg All devices incl. charger Device No. 7 W4X132B00597 Year of construction: 2011 Operating hours: approx. 5,400 Service due Condition: very good Available: from now on D-64859 Eppertshausen