used paal conveying belts

used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

used chain conveyor belt Manufacturer: PAAL Type: KES 1750 Year of construction: 1993 specifications: Conveying width: 1,750 mm Feed length: 18,370 mm Riser length: 13,440 mm Drive power: 9.2 kW 2-speed speed Side bolster heights: 527 / 1027 mm

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of construction: 2008 specifications: Conveyor width: approx. 1,500 mm Wheelbase:approx. 9,625 mm Strip course: approx. 2,935 mm horizontally underfloor, then rising to a length of approx. 4,500 mm below 28°, sloping below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE as far as possible pre-assembled, consisting of: - Strip scaffolding in solidly welded section steel and sheet steel edge construction, - additional sliding guides underneath the belt support profiles in the horizontal and climbing sections to support heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with 2 ...

Technical specification Conveyor belt width: approx. 1200 mm Motor: 4.4 kW Year of Make: 1999

used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing plate with bearing roller guide at the bottom and inside, - Press box bottom made of highly wear-resistant special steel, - interchangeable, screwed tread irons for the lower plate rollers, - Doors ...

1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, -  ...

Maximum pressure: 130 tons Pressing force: 107.5 tons/m² Channel cross-section: 1100 x 1100 mm Bale weight: approx. 700-1000 kg Power supply: 400 V/ 2 x 55 kW Year of construction: 1992 Number of bindings: 5 - fold vertical Dimensions of the tailgate: 1020 x 2000 mm Weight: approx. 40 tons Bale binding: automatic Press capacity at idle: max 720 m³ / hour Press capacity under operating conditions: max 450 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 15.5 tons/hour Theoretical throughput to density 60 kg/m3: approx. 26 tons/hour Theoretical throughput to density 100 kg/m3: approx. 40 tons/hour We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side

used residual roller saw Manufacturer: PAAL Type: RS 40 / 250 specifications: roll diameter: 400 mm roll length: 2,500 mm Saw blade diameter: 600 mm Drive power: 22 kW transport chain speed: 2.45 to 11.75 m/min. Throughput depending on roll length and saw cutting depth: 87.5 to 175 m/h housing width approx.: 1000 mm machine length approx.: 9000 mm Machine weight: approx. 2,400 kg

automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding

Roll splitting machine Manufacturer: PAAL Type: RS 100 / 200 Year of construction 1992 with screwed-in track roller guide and in closed frame construction specifications: Roll length maximum: 2000 mm Roll diameter maximum: 1000 mm Drive power: 7.5 kW Cutting force: 20 t Cutting speed: 4.8

An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

used box press Manufacturer: PAAL Type: HS 34 specifications: Filling box size: 1,000 x 700 x 2,200 mm (W x D x L) Filling opening: - 1st filling: 2,200 x 1,000 mm - 2nd filling: 1,200 x 1,000 mm Press pressure: approx. 18 t Drive power: 4 kW Lifting speed pre-pressing and retraction: 2.5 m/min. Lifting speed repressing: 1.25 m/min. Bale size: approx. 700 x 1,000 x 1,300 mm Bale weight: up to approx. 300 kg Weight of the machine: approx. 2000 kg Machine dimensions: 3,500 x 1950 x 1,450 mm (L x W x H)

used baler Manufacturer: PAAL Type: PACOMAT II-50 D Year of construction: 2020 Operating hours: approx. 12,000 specifications: Press force: 50 t Specific pressing force: 69 N/cm² Bale weights: up to approx. 450 kg depending on type and bale length Drive power: 45 kW Throughput: approx. 243 m/h Total connected load: 56 kW Duct format: 1,000 x 700 mm (H x W) Filling opening: 1,050 x 620 mm Lacing of the bales: 4 x horizontal Wire pass-through in the pressing direction seen on the right side Oil volume: approx. 750 liters including: Wire unwinding devices for approx. 40 kg wire rings Light barrier control Automatic-hydraulic infeed of the press channel The machine will be available at the end of March / beginning of April 2024.

automatic baler Manufacturer: PAAL Type: PACOMAT V-80 D Year of construction: 2018 Operating hours: 2,100 h specifications: Pressing force: 82 t Specific pressing force: 97 N/cm² Press pressure: 315 bar Channel format: 750 x 1,100 mm Filling opening: 1,600 x 1,020 mm Binding: 4-fold vertical Drive power: 22 kW Total connected load: 31 kW, 30 A Throughput: - approx. 275 m³/h max. at idle Machine weight: approx. 17 t

Paal 325F channel baler incl. conveyor belt Paal 325F BJ:2008 with. 27,390h operating hours Functional! Gebr. channel baler from the manufacturer Paal for sale. The system has been dismantled in working order and is ready for shipment in our warehouse. The system is offered with a filling belt for feeding the hopper. According to known product data, the total weight of the press including the filling belt is approx. 35t. If you are interested in this facility, please feel free to leave a message via our contact form. Condition: used condition, normal signs of wear present, functional, dismantled. Paal 325F Year of manufacture: 2008 with. 27.390h operating hours, working condition! Here is a channel baler from the manufacturer Paal for sale. The system has been dismantled in working condition and is located in our warehouse ready for shipment. The system is offered in ...