used PEDDINGHAUS for sale

Machine number: 4460051209007

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!

Sectional steel shears, Mas. No. 4423251690035 See photos

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Offer 22562 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 500 x 18 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 120 x 13 mm - at 45° 90 x 10 mm - Round steel 45 mm - Square steel 40 mm - Notcheter - With square notch for sheets up to 13 mm - Jack width / depth 65 / 85 mm - With triangular notch for sheets up to 13 mm - Notch depth 70 mm - Hole punch - Punching force approx. 80 t - Projection 510 mm - Stroke approx. 10 to 29 mm - perforates in steel up to 39 mm Ø in 16 mm - perforates in steel up to 30 mm Ø in 20 mm - Stroke rate at 20mm hole. / Scissors 30 / 20 1/min - E. contact stop - various punches + matrices - Drive 400 V / 7.5 kW - Dimensions W 900 x H 1800 x D 1800 mm - Weight approx. 2600 kg ...

offer 20366 Specifications: - Printing capacity 100 t - Stroke infinitely adjustable 10 - 100 mm - stroke rate 34 - 80 1/min - Projection 510 mm - Installation height 500 mm - Drive 380 V / 15 kW - punches e.g. up to 31 mm Ø in steel 25 mm - with special punching caliper e.g. up to 58 mm Ø in steel 13 mm - e.g. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2550 x D 2100 mm - Weight approx. 3700 kg - No tools or punching saddles available

Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Specifications: - Pressure capacity 1000 KN - Stroke infinitely adjustable 10 - 100 mm - Stroke rate 34 - 80 1/min - Projection approx. 510 mm - Installation height approx. 450 mm - Drive 400 V / 15 kW - punches e.B. up to 31 mm Ø in steel 25 mm - with special punch saddle z.B. up to 58 mm Ø in steel 13 mm - e.B. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2400 x D 2300 mm - Weight approx. 3600 kg - with: - Hydr. Low Pressure Grain Detection Device - various punches + matrices - Emergency stop button

Technical data: - Knife length 150 mm - Special knives for processing thin sheets - 2 pcs material tensioner - mounted on sliding table - Table height 1000 mm - Space requirement approx. W 800 x H 1300 x D 800 mm - Weight approx. 100 kg

Specifications: - Printing capacity 25 t - Flat steel shears - Flat bars up to 100 x 11 mm - or: 60 x 10 mm - Sectional steel shears - L- and T-blade at 90° 80 x 8 mm - at 45° 50 x 6 mm - Bar steel shears for round steel + square steel - Clinker with square notcher for sheet metal up to 8 mm - Stroke rate 30 1/min - Drive 380 V / 1.5 kW - Space requirement approx. W 800 x D 1000 x H 1600 mm - Weight approx. 650 kg

Offer 23278 Specifications: - Sheet metal and flat steel shears, knife length 175 mm - cuts flat steel up to 50 x 15 mm - or up to 140 x 8 mm - Profile - steel bar shears - cuts - angle steel up to 80 x 8 mm - Round steel up to 28 mm - Square steel up to 25 mm - Hole punch - punching force 275 KN - Stroke 24 mm - Projection 155 mm - perforated in steel up to 20 Ø in 10 mm - or up to 27 Ø in 6.5 mm - Drive 400 V / 3 kW - Space requirement approx. W 500 x H 1500 x D 855 mm - Weight approx. 450 kg - various punches + matrices

Hydr. comb. Sectional steel shears with hole punch Specifications: - Flat steel shears: - Knife length 420 mm - Cutting capacity, flat up to 400 x 18 mm - Profile steel bar shears: - Angle steel 120 x 10 mm - Square steel / round steel 30 / 32 mm - Notching device: - Sheets up to 13 mm - Latch width / latch depth 52 / 70 mm - Hole punch: - Punching force 800 KN - Projection 250 mm - Punches in steel up to e.g. 31 mm Ø in 18 mm or 25 mm Ø in 20 mm - E. footswitch - Drive 400 V / 4.0 kW - Space requirement approx. W 600 x H 1700 x D 980 mm - Weight approx. 1200 kg -with: - E. footswitch - E. Stroke - Various punches with die - Stop support table - Separate tool cabinet

One used METAX cutting line from Peddinhaus for bars up to 40mm

Machine type: 5-fold combined Section Shear with Hole Punching, Manufacturer: PEDDINGHAUS,. Model: Peddy,. Built: 1970,. Condition: very good. Offer type: used machine,. ,. Technical data:,. Performance in mm:,. Sheet metal: 10 mm,. Round: 28 mm,. Hole: 15 in 10 mm,. Drive type: el./mech.,. Drive: 1.5 kW,. Comment:. Punching hole,. Notcher,. Material stop,. Bogie. Weight: 500 kg,. ,. The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location,. ,. We will be pleased if you take an interest in our offer.,.

Punching force: 200 kN For example, punches a 13 mm hole in 12 mm steel Viewfinder via handwheel Assortment of tools is included in the price

Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.

Complete range of well-preserved stamps and dies in the same number and diameter as in the brochure shown.

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke triggering via foot switch Large support table WBL Assortment of tools is included in the price

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price

Max. punching and shearing capacity: 500 kN Punches e.g. 20 mm holes in 20 mm steel Shears on the flat steel shears on 350 mm to 13 mm steel Further technical data on request With an assortment of punches and dies as desired

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Max. punching and shearing capacity: 1000 kN Receptacle for hole diameters up to 90 mm Punches 31 mm holes in 25 mm steel Shears on the flat steel shears to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of punches and dies as desired Weight: approx. 3,000 kg

punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Shears on the flat steel shears to 300 mm to 12 mm steel Further technical data on request With a range of stamps and dies as desired

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices

Maximum punching force: 1100 kN Maximum shear force: 1700 kN punch ing: 510 mm support table hole 31 in 25 mm flat steel: 500 x 22 mm hydraulic holder for the flat steel knife kago n weight: approx. 5000 kg ; Very good

Machine type: Profile steel shears with punching Manufacturer: PEDDINGHAUS Model: 5-fold combined profile steel shears with punching Condition: very good Offer type: used machine Specifications: Achievement: round = Ø 20 mm, flat = 80 x 12 mm Angle steel = 50 x 50 x 6 mm T-steel = 50 x 6 mm Drive type: by hand Note: two machines on a stable, mobile substructure Weight: 200 kg The machine is in a very good and immediately ready condition and can be visited and demonstrated by us. We would be pleased if you are interested in our offer. Errors, changes and prior sale reserved.

Drill diameters 8 - 40 mm Drill taper MK4 Max. profile height 1.000 mm Max.Profile length 18.000 mm Max. thickness 150 mm Controller Siemens 840D

Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm

• Machine number: 4221875989007 • Punching force max: 800kN • Material thickness max: 25 mm • Punching device max: Ø 90 mm • Accessories according to photos (sold separately on request)

This cube has 3 magnetic clamping area. Dimension each area: Length: 2,000 mm Width: 2,000 mm Height: 2000 mm

Drilling machine Peddinghaus TDK 1000/9 Peddinghaus LC 1250 Saw Peddinghaus Signo 05 Markierer Siemens Sinumerik control system Year of construction: 1990 Maximum width of the workpiece (90 degrees): 1000 mm The cutting unit can be rotated 45 degrees to the right and left. Maximum workpiece width (45 degrees): 700 mm Maximum workpiece height: 420 mm (drill) - 440 mm (chopper) Maximum hole diameter: 40 mm Number of drill bits: 9 (3-3-3) Maximum saw blade diameter: 1250 mm Saw blade width: 9 mm Total equipment weight: ~17.5 t Equipment pick-up size: - Drill: 5000 x 2100 x 3000 mm - Saw: 3500 x 1300 x 2500 mm - Marking: 1400 x 1200 x 1200 mm - Controller: 1200 x 1000 mm - Hydraulic power unit: 1000 x 500 mm

The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Peddimat machining center for section steel Manufacturer: Peddinghaus Type: LC 1250 / TDK 1000/9F Year of construction: 1993 System consisting of: Longitudinal saw, drilling rig and marking system Long-cut saw Manufacturer: Peddinghaus Type: Peddimat LC 1250 Year of construction: 1993 Control panel Saw blade: Ø 1250 mm, Z = 5 Motorized mitre adjustment Hydr. Locking mechanism for mitre swivel in the range of 45 / 45° Kneeling Inlet and straightening device Interface for automatic saw blade feed and automatic miter adjustment Drilling rig Type: Peddimat TDK 1000/9F Vertical drilling unit with 3 spindles each incl. internal coolant supply Hole diameter max: 40 mm Peddimat roller feed system incl. measuring discs on the inlet and outlet sides automatic hold-down device each on the feed and discharge side automatic "Z" tower adjustment by DS servo  ...

Professional steel shears for tin locksmiths, assembly plants, Teaching work pieces, particularly stable construction stable application with shear encoder made of encoded steel tooth lever translation lever securing via rotary spring knives made of high-quality tool steel, hoisted and ground continuously adjustable holder cuts of sheets, flat steel steel mm: 18 knife length mm: 175 Net weight kg: 47.5 room requirements approx.0.5x0.25x2 m; ready for use

Scissors for reinforcing steel or bars max 32mm

round bar steel: 25 mm square edge steel: 22 mm L-beam: 70 x 7 mm cutting capacity: 100 x 10 mm plate thickness: 10 mm total power requirement: 1,3 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,1 x 0,65 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t punching cross-cut in cmm: -- stroke: 100 mm throat: 510 mm work height max.: 1100 mm Twist power: 31 Durchm. in 25 mm channels - flange: 100-400 mm Number of ventilators: 80-400 mm : 100-400 mm : 100-550 mm punch stroke: bei 20 mm Hub: 60 p.Min sheet thickness max.: bei Luftbiegung: 10 mm total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,7 x 0,9 x 2,3 m Electric 380 Volt: Diverse punches and dies: Foot pedal: Machinefeets: Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t square measurement: . mm diameter: . mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t punching cross-cut in cmm: stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maximum punching force: 1100 kn Maximum shear force: 1700 kN Punch projection: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down for the flat steel knife Square notcher The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mm square edge steel: 40 x 40 mm L-beam: 140 x 13 mm Punch power: 900 kN hole punching press: throat: 510 mm hole punching press: max. length of stroke: 29 mm hole punching press: capacity (dia. x thick.): 31 x 20 mm notching: l + T material: 80 x 14 mm no. of strokes: 40 / 45 Hub/min total power requirement: 4 kW weight of the machine ca.: 3,7 t dimensions: 2,1 x 0,7 x 2,12 m Accessories: various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Ja : Stanzkraft 800 kN frequency: 50 Hz current: 17/11 A voltage: 220/380 V round bar steel: 32-17 mm square edge steel: 30-18 mm : 100 x 10 mm flat steel: 350 x 16 mm throat: 200 mm work height max.: 1107 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1200 x 700 x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volt: 380 V weight: 1,4 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 1,2 t serial number: 422A045 : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 63 mm square edge steel: 55 mm flat steel: 100 x 25 mm : engine: 380 V, 6,3 kW weight: ca. 2.450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5 weight: 5 t : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.