maximum number of results exceeded > 1000
please refine your search
Model
(Manufacturer: PM)
New Silo Mixer: 6000 liters, engine: 4 Kw, coaxial reducer engine: 225 rpm. Unloading big bags to sacks, filling break for sacks and big bags.
Turbomixer: 1.000 L. Brand: Papenmeier, 2-speed engine: 150/190 Kw. at 1500 and 3000 rpm
Drying centrifuge brand: viplat, length: 1.2 m, Ø: 0.5, grill: 3 mm, motor: 22 kw (30 hp) at 3,000 rpm and electrical panel.
Label and cap remover machine from PET bottles: 3 x 1 m diam. Grille hole: 50 mm, axle rpm: 700 rpm, engine: 37 Kw (50 hp). Year: 2016.
Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...
Centrifuge Brand: Sion, model: 1400x700 mm Ø, motor: 55 Kw at 2960 rpm, year: 2009. No grill and no electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Refrigeration equipment: 200,000 frigories, with 2 compressors (one for repair), brand: Bitzer 60 amps. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Diameter: 800 mm, motor: 75 Kw (100 hp) 2950 rpm. Suction and circular screen: 1.20 m. With electrical panel.
Turbomixer: 300 liters, brand: Caccia, stainless steel, engine: 380 V 2 speeds; 1st gear: 63 hp at 1800 rpm and 2nd gear: 75 hp at 2960 rpm.
Refrigeration equipment. Brand: Ferroli, model: RGA IR200.2VB AB OM5. J020, frigories: 198.000, power: 71.6 Kw, Amp: 170, gas: R410A.
Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...
Extrusion line for manufacture of PS-PE-ABS-PP sheets etc ... Brand: Siepla Year of manufacture: 2008 Four-cylinder grille with servo-controllers Flat head: Maximum head width: 1000mm Maximum aperture up to: 2mm Minimum aperture: 200 microns Built-in shear for cutting plates. Two single-screw extruders: Ø 120mm and Ø 75mm MAAG melt pump and vertical pump: 1300 m3/h, 1350 rpm. Type: G160A Drag trolley Production capacity: 250 – 350 Kg/h Horizontal hydraulic changer with double cavity: Ø 16 mm. Manuals are available for each machine station as well as for compliance with EC directives.
Complete laundry for PET, PVC or PS in stainless for some: 500 Kg / hour. Composed of: -Reception and densing raft: 1,500 mm x 500 mm, with two blades. -Collection and stirring pond: 1,500 mm x 1,500 mm. With emptying valve and outlet belt to centrifuge of canjillions. -Centrifuge: 3,000 r.p.m., 12.5 c.v. -Collection and shipment of centrifuge to chamber separation of paper and thin. -System by air extraction separation of papers. -Collection and shipment to cyclone for Big-Bag filling.
Shredder mill with blades Brand: Prat, model: P-4, cutting chamber: 600x420 mm, direct motor: 37 kw (50 hp). Open rotor, inclined cut. 980 rpm
Turbomixer: 200 litres, make: Henschel, model: FM200A, stainless steel, engine: 37/43 Kw 2-speed 1500/3000 rpm. Electrical panel.
Turbo mixer brand: TPM, stainless steel, capacity: 400 liters, 2-speed engine: 1500/3000 rpm, power: 60/72 kW, stainless steel chiller, brand: TPM, capacity: 1000 liters, with double chamber for cooling. Reduction motor: 10 hp. Year 2005.
Conveyor belt Length: 5.80 m, width: 0.65 m. Geared motor: 0.55 kw. Cold air tunnel and air cooling equipment with 2 compressors and radiators.
Centrifuge New brand: GESTER, model: CG-1200V. Shaft length: 1.2 m and axis diameter: 0.5 cm. Engine: 50 hp at 3000 rpm. Pneumatic piston for cleaning on top. Electrical panel with triangle star.
STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...
HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...
AFM DEFUM BACA R 1000 CNC vertical machining center produced in 2016 in Poland is used for precision workpiece machining. Wide machining capabilities, high productivity and an extremely stable design with reliable components make the machine ideal for both series and unit production. In order to achieve the highest precision in the machining process, the spindle unit uses high-accuracy bearings and backlash-free reciprocating screw gears for the X,Y,Z axis feeds. Both spindle rotational speed and work feeds are programmed and controlled steplessly in the perfectly optimised SIEMENS CNC controller. In addition, the controller has many useful functions that maximise machining productivity and allow the full potential of the BACA R1000 CNC machining center to be exploited. The BACA R 1000 milling center also has a wide range of equipment, including a 20-position drum magazine with too ...
UNI-KAT SPARK 2 oxygen plasma cutting machine built in 2020 in Poland, is used in the thermal cutting of steel sheets. This versatile machine with extensive machining capabilities is ideal for even the most intensive applications in any production facility. Thanks to its extremely stable design with a large work area, the UNI-KAT SPARK2 plasma-gas cutting machine offers much greater cutting precision, compared to single-support cutting machines. In addition, in order to simplify the performed work, the drawings of the cut parts can be produced in most vector graphics programs. The offer also includes extensive additional equipment, including e.g. a HARRIS 198-2TF torch powered by technical propane-butane and technical oxygen, advanced CAD/CAM software and an air compressor. The machine has so far worked for current production (one shift) and has been regularly serviced. The UNI-KAT pl ...
PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...
H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...
AJAN SHP 130 plasma cutting machine was built in 2015 in Turkey. This highly efficient and precise machine is used in the thermal cutting of stainless steel, structural steel and aluminium sheets. In the machining process, the AJAN SHP 130 1500 X 3000 plasma cutting machine uses a plasma torch, which is powered by a reliable 130 A plasma source. The lightweight design made of a stiffened profile additionally ensures that cutting is performed with the utmost stability, even during the most intensive machining. Any contamination generated during machining is eliminated on an ongoing basis by the extraction table, increasing operator comfort and safety. To this date, the machine has run for a small amount of time and is in perfect condition. The work table grate was replaced with a new one during a recent upgrade. The offer also includes optional equipment, which includes a torch holder ...
DOOSAN LYNX 220 LSYC 5-AXIS CNC turning center was built in 2014 in South Korea. In order to meet all production requirements, the machine uses state-of-the-art components and technologies, which combined with an extremely stable design offer the best precision and turning performance in its class. In addition, the offered equipment allows even the most intensive machining process to be streamlined and fully automated in any production facility. Workpieces with a maximum length of 510 mm are machined inside a large working area with two high-speed spindles. During the machining process, the specially designed bed of the machine effectively dampens all vibrations and oscillations, resulting, e.g. in improved workpiece surface quality and increased tool life. The offer includes a wide range of equipment, such as the Y axis, bar feeder, measuring probe and the intuitive DOOSAN FANUC i ...
FANUC ROBODRILL ALPHA D21 LiB5 CNC machining center manufactured in 2017 achieves outstanding efficiency and precision, even during the most demanding workpiece machining. The machine features an extremely stable design with a large working area, inside of which it incorporates, among others, a rotary table and an extremely powerful high-speed spindle. This is further complemented by the intuitive FANUC Series 31i-MODEL B5 CNC control, whose excellent optimisation and multitude of functions allow to maximise the efficiency of the machining process, while ensuring excellent results. To this date, the FANUC ROBODRILL CNC milling center has operated for a total of 1911 hours and has been used only for machining stainless steel. The total weight of the machine is 2200 kg. Technical specifications of the FANUC ROBODRILL ALPHA D21 LiB5 milling center - feeds in the X/Y/Z axis: 700/400/330 ...
DOOSAN LYNX 220 LMSC CNC turning center was manufactured in 2015 in South Korea. This extremely efficient and reliable machine is able to streamline even the most demanding machining process in any production facility, thanks to the use of, among others, two high-speed spindles and an extremely stable design. Workpieces with a maximum diameter of 240 mm and a length of 510 mm are machined inside a large working area equipped with a specially designed bed. The bed effectively dampens all vibrations and oscillations, resulting in a better quality of the machined surface and increased service life of the cutting tools. To this date, the DOOSAN LYNX 220 dual-spindle CNC lathe has worked a total of 2198 hours and has been used exclusively for machining stainless steel. The total weight of the machine is 3400 kg. Technical data of the DOOSAN LYNX 220 LMSC CNC lathe General data - feeds in ...
CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...
BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...
OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe ...
VOORTMAN V630 + HS540 beam drill line was built in the Netherlands. An easy-to-use machine with wide machining capabilities, allows to significantly increase the productivity of any industrial plant by fully automatic drilling, countersinking and threading of metal workpieces. All of this while maintaining low operating costs, high productivity and excellent precision. The VOORTMAN V630/1000A beam drilling machine consists of the following parts: – VOORTMAN V630 drilling unit – PEHAKA HS 540/1100 GBS band saw – roller conveyor The production line uses top-quality components from renowned brands to reduce size deviation tolerances and improve the quality of the final product. These include among others drilling heads with automatic 6-position tool changers for drills for various types of workshop work. During machining, the profile is fed to and from the workstation on a sp ...
METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...
SCHLEUNIGER WireTwister 3300 AD wire twisting machine built in 2016 in China offers unparalleled twisting performance, thanks to the use of high-quality components and high-tech solutions. The machine, designed for the production of twisted pair cables, is also very simple and convenient to use. The ends of the untwisted wires are simply loaded into the holders and the twisting head respectively. The SCHLEUNIGER wire twisting machine pulls the wire very accurately to the programmed position, after which the head twists the wires with programmable tension control. At the end of the process, the holders automatically eject the twisted pair into the integrated storing channel and the taker returns to its initial position. The SCHLEUNIGER WireTwister 3300 AD wire harness machine is brand new and originally packaged. The photos and video shown in the offer are for reference – they repres ...
DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...
NOVAR ACTIVE 4000 CNC milling machine built in 2002 in Italy is the perfect choice for even the most intensive production challenges. The machine allows for efficient machining of large-sized workpieces with a maximum weight of 10 tonnes with reliable components in the form of cutting tools and a high-speed spindle. The installed HEIDENHAIN TNC 426M CNC control additionally guarantees seamless operation of the machine and utilisation of its full potential and capabilities. The NOVAR ACTIVE CNC bed milling machine has been continuously serviced and has new bearings on the spindle. The total weight of the machine is 27000 kg. Technical parameters of the NOVAR ACTIVE 4000 milling machine - CNC control: HEIDENHAIN TNC 426M - feeds in the X/Y/Z axis: 3500/1100/1400 mm - rapid traverse in the X/Y/Z axis: 8000/10000/10000 mm/min - work table surface (L x W): 4000 x 1000 mm - maximum wor ...
GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...
DMG MORI SEIKI NHX4000 CNC machining center made in 2014 in Germany is an ideal combination of functionality, productivity and precision that can handle even the most complex challenges in a wide range of industries. This technologically advanced machine consists of a single-piece bed with sliding column, reliable components and extensive optional equipment. The machining process takes place inside a large work area, which includes an extremely powerful high-speed spindle, a 4-axis rotary table and a two-pallet system. This system allows uninterrupted machining of multiple workpieces, thus significantly increasing production efficiency and reducing machine downtime to a minimum. In addition, all basic machine components are cooled to increase their service life. The DMG MORI SEIKI horizontal machining center is equipped with optional equipment, including measuring probes, tooling and ...
OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...
ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...
MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK ...
MAZAK SQT 15MS CNC turning center built in 1992 in Japan, is the best choice for any manufacturing facility. All of this is due to the 12-position toolhead and two powerful spindles (main spindle and sub-spindle) that maximise turning efficiency while maintaining high accuracy and precision. There is also an easy-to-use MAZATROL T32-3 CNC controller with a colour screen through which all machining parameters are programmed in just a few steps. The total weight of the machine is 4700 kg. Technical specifications of the MAZAK SQT 15MS CNC lathe General data - feed rate in X/Z axis: 180/575 mm - maximum workpiece diameter: 300 mm - maximum workpiece length: 531 mm - bar diameter: 51 mm - X-axis positioning accuracy: ± 0.002 mm - Z-axis positioning accuracy: ± 7 s - C-axis positioning accuracy: ± 0.003 mm - tool clamping force: 42140 N - tool head indexing time: 1.4 s/full st ...
SUTEAU ANVER XPM 18X13 300T receding head die cutting press was built in France in 2008. The machine aimed at mass production, is used in the process of precise cutting in foam and non-metallic materials, such as plastics, textiles and rubber. Built-in hydraulic systems combined with a stable design and reliable components ensure high precision and speed of cutting, regardless of machined material. The material taken from rolls or sheets is pressed against the machine head by the vertical movement of the working table, under which hydraulic cylinders are located. The cylinders exert a balanced pressure to achieve the ideal position of the table in relation to the head. The material is then machined using dies that can be mounted either to the head surface or on a lifted table. To facilitate the operator’s die positioning and the insertion and removal of the cut material, the SUTE ...
CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining ...
TECNA 4608N spot welding machine which was built in 2008 in Italy is used for precision welding of two sheets of steel or aluminium with a maximum thickness of 4 mm each. During the machining process, the electrodes heat the workpieces until they reach a plastic state in order to become one inseparable piece after cooling. The adjustment of arm reach and electrode stroke enables adaptation of the machine to the user’s individual production requirements. The 4608N resistance welding machine is equipped with a state-of-the-art TECNA TE90 Mark II microprocessor controller, designed to ensure a smooth and uninterrupted welding process. The control system enables the programming of 12 different process parameters and control of the SCR thyristor, responsible for regulating the welding current. The offered TECNA spot and projection welding machine also comes with, among others, a set of e ...
SPIRO 6000V4 plasma cutting machine built in 2016 in Switzerland, performs ideally in medium and large industrial plants during the industrial production of parts made of steel sheets and non-ferrous metals. To ensure high cutting performance even during the most intensive machining, the extended work space based on a stable design allows simultaneous cutting and unloading of finished products without interrupting machine operation. The SPIRO CUTLASS 6000 plasma cutting machine is operated using the high-speed Spiro HS Controller with a complete library of parametric models and shapes. Technical specifications of the SPIRO 6000V4 plasma cutting machine - work table area (L x W): 6000 x 1500 mm - maximum workpiece thickness (galvanised steel): 6 mm - maximum workpiece thickness (black steel): 6 mm - maximum workpiece thickness (stainless steel): 6 mm - maximum workpiece thickness ...
BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...
YASKAWA MOTOMAN GP35L industrial robot was built in Japan in 2021. This compact machine with an extremely robust body and extended reach is ideal for a wide range of applications i.e. load handling, machine operation and grinding/polishing. Thanks to its compact size and weight, it can be installed in hard-to-reach areas in a small amount of space, reducing at the same time interference with peripheral equipment. The YASKAWA robot is additionally equipped with a MOTOMAN YRC1000 controller with the ability to use extended commands and create advanced motion functions. The offered GP35L robot is brand new and has never been used. The total weight of the machine is 600 kg. Technical specifications of the YASKAWA MOTOMAN GP35L robot - number of axes: 6 - arm reach: 2538 mm - maximum payload: 35 kg - axis motion range S axis: ± 180° L axis: +135°/-90° U axis: +206°/-80° R axi ...
SOLLANT SLT 15 rotary screw compressor built in China in 2021 is a versatile device designed to deliver the highest quality compressed air. The compressor’s special modular design features a small number of parts and connectors, ensuring efficient and uninterrupted operation even during the most demanding industrial applications. The SOLLANT SLT 15 rotary screw compressor also features an integrated SOLLANT LGA-2.6 refrigeration dryer, which continuously removes moisture and water vapour from the compressed air, minimising the risk of corrosion. All key operating parameters are continuously monitored by a MAM-880 controller with electronic display and sensors. The total weight of the machine is 550 kg. Technical specifications of the SOLLANT SLT 15 compressor - power: 15 kW - maximum operating pressure: 1 MPa (10 bar) - capacity: 2.1 m3/min - drive type: direct drive - refri ...