used ras motorized shears

Motorized sheet metal shears make RAS type 83.25Machine -No: 27/10Technical specifications:Cutting length: 2540 mmSheet thickness max.: 3.0 mmNumber of strokes per minute: 50Cutting Angle:1.35°Table width: 430 mmTable height: 750 mmlateral projection: 100 mmRear stop adjustment: 550 mmDrive power: 5.5 kWWeight approx.: 2.5 twith- manual backgauge- manual adjustment of the back gauge from the front with reading scale- foot switch- angle stop- support arms- Tilting roller tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sell a table scissors, which was used exclusively for plastic cutting. Manufacturer RAS Type: 50.20 Space requirement 2.5m*1.1m*1.6m High Cutting length 1020mm Nmyhr Cutting thickness 1.25mm Weight 220kg

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Panel shears Sheet metal scissors used Manufacturer: RAS / REINHARDT Maschinenbau Type: 82.20 Cutting width max. 2040 mm Sheet thickness max. 2 mm 380 V Dimensions approx. 2500 x 1500 x 1100 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge adjustable from the front up to 550 mm Pneumatic sheet metal holding Knife sharpened Weight: 1100 kg

Type 52.70 Specifications: Cutting length 1040 mm Sheet thickness in St 2.5 mm Sheet thickness in stainless steel (700 N) 1.5 mm Motorized back gauge up to 500 mm Stroke rate approx. 60 rpm

Max. cutting length: 1040 mm Max. sheet thickness: 2.5 mm steel Manual backgauge can be operated from the front up to 500 mm Side stop Knife sharpened Weight: 750 kg

Machine Type: Guillotine Shears Manufacturer: RAS Model: 54.30 Year of construction: 1975 Condition: very good Offer Type: Used Machine Specifications: Capacity: 1040 x 4.0 mm Drive type: el./mech. Propulsion: 7.3 kW Remark: rip fence, Material supports and stop at the front, 2 spare blades Weight: 2000 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge can be operated from the front up to 500 mm Side stop and table extensions Pneumatic sheet hold-up Knife sharpened

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge can be operated from the front up to 500 mm Side stop and table extensions Pneumatic sheet hold-up Knife sharpened

Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold

Electric tool changer RASTER Premat EWD20

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rasch Type: RR foiling machines for chocolate eggs with infeed System Year of manufacturing: 1987 pieces: 2 pieces output capacity: up to 150 pieces/min. Format on machine: Double twist Ei/Egg 43x27mm / Kugel/Bowl 30 mm. We offer this machine in 'as is' condition, without warranty excluded Vat, ex Work Germany, unpacked

Max bending length: 3200 mm Max sheet thickness: 4 mm steel Weight: approx. 5800 kg Mwauag Motor-controlled rear stop with folding cams up to 1500 mm Motorized bending cheek adjustment Multibend 9000 Control Segmented upper cheek tool with automatic tool clamping (height 150 mm)

Double stand punching machine Control: UNIDOR Pressing force: 100 to. Stroke rate, continuously variable via PIV gearbox: 50 - 200 H/min. Table area: 1200 x 710 mm. Plunger area: 900 x 500 mm. Plunger stroke: min. 6 mm, max. 82 mm. Tappet adjustment: 100 mm. Distance, table - plunger: 387 mm. Diarrhoea opening in the press table: 120 x 400 mm. Incl. roller feed, type: WE 16, 130 x 3 mm. Weight: approx. 13500 kg. Abm. WxDxH: 2700 x 2400 x 3500 mm. Good operational condition. Freely loaded from location. The machine was demonstrably overhauled in 2021 for EUR 21,000.00. The machine can be inspected and demonstrated under power in consultation and is immediately available.

Channel folding machine make RAS type 22.81Mach. -No: 297/5, year of construction 11/1987for producing longitudinal folds on the edges of rectangular and square air ductsTechnical specifications:Sheet thickness max .: 1.0 mmsmallest duct cross-sectionfor sheet metal thicknesses of 0.5 mm to 0.63 mm: 80 x 80 mmfor sheet metal thicknesses of 0.5 mm to 1.0 mm: 100 x 100 mmwith guide carriage: 160 x 160 mmPassage speed about 15 m / minDrive power: 2.2 kWDimensions approx: 6385 x 495 x 1100 mmWeight approx: 650 kgWith- Guardrailsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal - folder former make RAS type 22.15Built in 1970Profile height max.:20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max .: 1.5 mmProfiling speed approx. 14 m / minPower requirement: 3 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx. 300 kgWith- Profile rolls for Pittsburg fold and standing seamused, from an operating resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Folding former make RAS type 22.15Masch. -No: 35/3 built in 1971Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 1.25 mmWorking speed approx: 14 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Rollers for Pitsburghfold 1mm- Sliding fold 0,5 - 1,5 mm width 29 mm- 7 pairs of rollsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.15Fabr. -No: 155/6 year 1982Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 0.5 - 1.25 mmSheet length: 300 mm - optionalWorking speed approx: 14 - 17 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Snap- Cam standing seamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350*100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loadin ...

Ras 3200 x 4 mm CNC Max worklength: 3200 mm Max tickness: 4 mm Distance between clampblock -- ram: 400 mm Max displacement back gauge: 1550 mm Eletric motor (power): 7,5 kW

Sheet thickness: 4,5 mm Folding length: 2540 mm Depth rear gauge: 1500 mm CNC Brand: _Unknown / Other Make RAS Multibend Type 74 . 25 Year 1987 ras MULTIBEND 8000 schwenkbiege Sheet thickness (mm)T = 4.5 mm Folding length (mm)L = 2.540 mm Depth rear gauge (mm)Depth = 1.500 mm 2 sets off toolling Adj. upper beam = 400 mm Bend angle = 0 - 180 Gr