used RAVENSBURG for sale

No. 4944: 1 gebr. Lathe Fabr. RAVENSBURG, type K 66 - 3500 ( 4500 ),Bauj. 1972 Arb.-Ber.: Sph. 1100xSpw 3500 (4350) mm, Accessories: Plate of 1500 mm Tailstock Bed extension Rollers - Support bracket Bezel Grinding support Other: Speed range 0.6 - 250 min-1 Space requirement approx. Weight approx.

Manufacturer / model RAVENSBURG P 30 New in 1976 / 2019 Swing Over Bed 3.040 mm. Swivel diameter in pocket 4.300 mm. Turning length 3.600 mm Turning length 140 mm. Speed Range 0.18-92 rpm. Speeds 36 4 axis digital readout system HEIDENHAIN 8 independent jaw chuck Ø2.500 mm. INCLUDED Max workpiece allowed 25.000 kg Equiped with tolos and jaws INCLUDED Total power 56 kW Machine weight 55.000 kg Machine dimensions (LxWxH) 9.450 x 4.700 x 4.400 mm.

Retrofitted in 1998 and revised in 2012 by SIRMU Technical datas: Stroke: 2000 mm Inclination of the platform: 0-60 ° Rotation: 360° Table diameter: 4.500 mm Maximum table load: 50,000 kg Plate diameter: 2.250 mm Movement 4 stages 1 28 mm / min 2 100 mm / min 3 280 mm / min 4 560 mm / min tilting of the table: 0-60 ° 4 stages 2 0.7 ° / min 3 2 ° / min 4 4 ° / min 5 7 ° / min Rotation of the table 4 stages 1 270 mm / min referring to a diameter of 3,500 mm 2 890 mm / min 3 2,700 mm / min 4 5,400 mm / min Total weight: 90,000 kg

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

faceplate diameter: 1300 mm turning diameter over slide rest: 850 mm centre distance: 1800 mm turning diameter: 2150 mm turning speeds: 3,15-160 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1200 mm turning diameter over slide rest: 900 mm turning length: 2000 mm Control: Siemens spindle passage: 90 mm type: Sinumerik 3T Tool changer: 16 number of spindle speeds: 2,4-900 U/min spindle motor: 54 kW tail stock: 3 jaw chuck Forckrath: 630 mm chip conveyor: total power requirement: 87 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 11x4,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 0 mm turning diameter over slide rest: 900 mm turning length: 1.000 mm total power requirement: 25 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine ...

Largest stroke of the plunger: 500 mm ram adjustment: 400 mm Inclined position of the plunger, on both sides up: 20 Grad (°) : 380 mm Maximum distance between table and plunger: 1 280 mm throat: 775 mm height between table -ram: 700 mm table diameter: 700 mm table hole: Ø 130 x 100 mm longitudinal travel: 600 mm cross travel: 600 mm stroke speed: 3 - 80 m/min longitudinal feeds, infinitely variable: 0.01 - 1 mm Smallest increment of the rotary table: 0.01 Grad (°) Rapid traverse speed: 2 000 mm/min. cutting capacity: 2 500 kp total power requirement: 45 kW weight of the machine ca.: 7 t Control: Siemens SINUMERIK 810 N Machine geometrical Digital readout, many accessories! Operating voltage 400 V / 50 Hz Total operating power 45 kW Tank capacity 200 liters Cooling and heating capacity 4.6 / 1.5 kW elivery rate gear pump 20 l/min at 6 bar CBN grinding wheel diameter 45 / 65 / 70 / 75 / ...

max. ram stroke: 350 mm throat: 650 mm table diameter: 750 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: 350 mm throat: 650 mm table diameter: 750 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Ravensburg A2,2 circulation diameter max.: 2.200 mm diameter of quill: 90 mm weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter external: 4.300 turning length: 3.600 mm swing diameter over bed slide: 3.040 mm bar passage: 140 mm turning speed range: 0.18-92 U/min digital readout: HEIDENHAIN total power requirement: 56 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 9.450 x 4.700 x 4.400 m New in 1976 / 2019 - 8 independent jaw chuck Ø2.500 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 1200 mm Center distance: 6500 mm Spindle bore: 150 mm Numbers of bed guide ways: 3 Weight between centres maximum: 7000 kg CNC Brand: Siemens CNC latheRavensburg - KV1 - 700 CNC  Work load flying in chuck 2500 Kg Work load supported 10000 Kg 4 Chuck 1000 mm with heavy jaws Clamping inside 200-1120 mm  Clam;ping outside 80-1000 mm  C-Steady rest 100-450 mm x 7000 Kg C-Steady rest 400-600 mmx 7000 kg Sauter 6 position revolver Swing over bed Ø:        1200mm Swing over cross slide Ø:700mm DBC Turning Length:      6500mm Spindle bore:            150mm Spindle power:           80kW Tailstock spindle Ø:     200Ø Stroke pinole:           200mm Spindle taper:        &nbs ...

Turning diameter: 2000 mm Turning length: 9470 mm Turret positions: 0 Make: Ravensburg Type: KVH3 - 1000 CNC YOP: 2005 Max. turning Ø:2.000mm X-Axis:        780mm Z-Axis:        9.470mm Spindle bore:  150mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:4 Length:        17.000 mm  Width:         6.500 mm  Height:        3.200 mm  Weight:        67.000 kg  Work load 15 t (20t) Hydrostatic guideways support Chuck 1300 mm Siemens 840 power line X/Z/C Axis C Axis 360.000 direct driven Sauter 4 position tool system CAPTO C6 2 x Steady rest 500 + 750 mm Milling attachment Sk40 / 1500 RPm / 4,5 kW

3 guideway flat bed lathe Distance between centers: 6100 mm Swing over bed: 1500 mm Swing over cross-slide: 1320 mm