used rehnen edge sanding machines

Edge grinding machine Rehnen -new- Type: Junior R 1 with motor band oscillation with support table at the deflection roller Additionally included in the scope of delivery is an angular and miter stop Engine power 2.2 kW Tape speed 22 m/sec Grinding belt dimension 2280 x 150 mm Abrasive back wall 850 x 150 mm Grinding unit swivelable 90 - 180° Grinding belt tension pneumatic Table size 750 x 350 mm The top in heavy casting with built-in three-phase motor 380 V, 2.2 kW 2850 rpm The machine is equipped with built-in switch-plug combination; Motor circuit breaker and main switch according to VDE Dimensions of the abrasive belt rear wall 850 x 150 mm the abrasive back wall is glued with a graphite sliding surface Steel table adjustable in height by spring pressure Grinding belt dimension 150 x 2280 mm The machine is supplied with 2 pieces of grindin ...

technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...

Band width: 150mm; Band length: 2280mm; Table size: 750mm x 350mm; Additional table: 350mm x 300mm; Veneer sanding device: no; Oscillation: yes; Grinding unit swivel: yes; Suction port: 120mm; Motor power: 2.2 kW; Machine length: 1000mm; Machine width: 800mm; Weight: 200kg;

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.

Plate transport trolley - Swivel from vertical to horizontal position - Hydraulic height adjustment - Support size 2500 x 1500 mm - Load capacity 250 kg Available from January 2024!

Rehnen KBA edge processing machine for grinding, profile milling and profile grinding of edges in one pass Pre-milling unit., processing aggregates: 6, feed: infinitely variable, Connected load: 10 kW, Min. workpiece thickness: about 10 mm, Max. workpiece thickness: approx. 110 mm, Aggregate 1: Pre-milling, Aggregate 2: grind, Aggregate 3: Rounding milling machine above, Aggregate 4: Rounding milling machine below, Aggregate 5: Profile milling machine below, Aggregate 6: Profile grinding below

Motor output: 3 kW Table dimensions: 350 x 750 mm grinding band dimension: 150 x 2.280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length 300/600 mm Width 72 mm Roughness P240/P320 Holder 4,5 mm Price 0,87 Eur/1 pcs. (300) (EXW Jonava, Lithuania) Price 1,74 Eur/1 pcs. (600) (EXW Jonava, Lithuania)

Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm 40 mm: Price 60 Eur (EXW Jonava, Lithuania) 60 mm: Price 68 Eur (EXW Jonava, Lithuania)

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300

Wood strength KSO 1500 Edge sanding machine with swiveling grinding unit oscillating belt 2260 x 150 mm belt Contact surface 770 x 150 mm Belt speed 16 m / sec. Cast iron table size 680 x 310 mm Engine power: 400 V 50 Hz 1, 5kW 2 suction nozzle with diameter 100 mm Weight 162 kg G & pieces 5368150SET

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Pass width min mm: 15 Pass-through width max mm: 150 Workpiece length min mm: 1200 (grinding units) - 500 (grinding plate group) Material thickness min mm: 10 Material thickness max mm: 100 Space requirement mm: 13200 x 2500 x H 2050 Total grinding plate: 8 - mm 200 x 110 Workpiece width mm: 100 Total grinding units: 4 "LEV. C.100" - HP 3 Grinding belt length mm: 2780 x 40/90 Workpiece width mm: 80 Group Position: 2 Right (5-6) 2 Left (7-8) Tilt: -35° + 90° Painting station "Verve" - "Sistema di regolazione linea ink" - CE 2011 Complete with suction cups and pistols (position 9) Machine control: C.24U Total connection KW: 31 Outdated

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm

Edge chamfering machine make PULLMAX type X 93Machine -No: 70270-06, built in 1982for optimum beveling for perfect weld preparationexact, deformation-free, metallically pure and chemically unaffectedTechnical specifications:Feed rate 1.5 / 3.1 m / minBevel angle 25 - 55 °smallest straight edge 3 mmMax. Sheet thickness 50 mmExternal dimensions 1360 x 1110 x 1510 mmWeight approx 1300 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grinding machine • For grinding curves and internal radii

Weibert WJ-KS26 Edge grinding machine with oscillation NEW MACHINE! 400V 3 KW ( 4 hp) S1 100% n=2840 min. Grinding table 750x300mm Table height adjustment 200mm Abrasive back wall 850x200mm Grinding belt dimension 2600x150mm Grinding unit swivelable 90°-45° with quick adjustment Band speed 20m/sec. Oscillation on and off motor 0.25 KW (0.34 hp) Central suction connection 120mm Manual adjusting m degree display! WJ-R00100 The following options included in the price! Roller pull-out table widening WJ-R00101 Miter stroke WJ-R00102 Driving device WJ-R00103 Feed machine 3 rollers 120mm with bracket special price

Weibert KS30 Edge grinding machine with oscillation, rotary star and veneer cut with rotary star 60-100-120mm WEIBERT WJ-KS30 new 400V 3 KW (4 hp) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Abrasive back wall 1050x200 mm Band speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 hp) Can be switched on/off Machine table and guides made of GRAUGUSS Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzles 120 mm Rotary star with 3 additional contact rollers 60-100-120mm Bandwidth 150 mm WJ-R00200K1 Roller pull-out table widening

Welding edge former make TRUMPF type TKF 100Mash. -No: 702592Max. Sheet thickness: 25 mmHelix angle: 15 - 60 °Max. Inclined position at 40 kg strength: 10 mmMax. Working speed: 2.5 m / min.Strokes per minute: 500Power: 1900/1400 WWeight approx: 14.5 kgPower connection: 220 V / 50 HzusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Chamfering and deburring machine Fabr. WIFEX type 25Table top length: 250 mmTable top width: 90 mmTabletop height: 50 mmSpeed: 22000 rpm.Collet chuck: 6.0 mmWeight: 4.5 kgPower connection: 220 V / 50 HzPower: 320 WusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding edge former make TRUMPF type TKF 100Mash. -No: 702592Max. Sheet thickness: 25 mmHelix angle: 15 - 60 °Max. Inclined position at 40 kg strength: 10 mmMax. Working speed: 2.5 m / min.Strokes per minute: 500Power: 1900/1400 WWeight approx: 14.5 kgPower connection: 220 V / 50 HzusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electr. Welding edge former make TRUMPF type TKF 150Mash. -No: 784772Max. Sheet thickness: 32 mmHelix angle: 15 - 55 °Max. Inclined position at 40 kg strength: 15 mmMax. Working speed: 1.25 m / min.Strokes per minute: 300Power: 1900/1400 WWeight approx: 21.4 kgPower connection: 220 V / 50 Hzvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Weld beveller make CEVISA type CHP 7Technical specifications:Sheet thickness plates and pipes: 4.0 - 8.0 mmMaximum bevel in one run: 6.0 mmMaximum bevel in multiple runs: 10 mmPlate bevel width min.: 55 mmTube chamfer diameter min. : 100 mmDisc chamfer diameter min. : 350 mmChamfer Speed: 1.6m/min.Weight approx.: 45 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools