used ROUNDO for sale

Max. bending length: 1500 mm Max. sheet thickness: 10 mm steel Upper roll diameter: 195 mm Includes rollers for rolling flat steel Clockwise and anticlockwise rotation via hand-held control unit

Max. length of plate 3000 mm Max. plate thickness 40 mm Number of rolls 3 pcs Upper roll diameter 550 mm Lower roll diameter 450 mm Control Roundo WCN Main motor power 94 Kw Equipped with: Pre-bending, hydraulic Three roll drive Cone bending divice Electro-hydraulic operation of drop-end Top support Side supports Roller conveyor Service tools etc.

sheet width: 1500 mm plate thickness: 10,00 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Top roller diameter: 195 mm Includes rollers for rolling flat steel Clockwise and anti-clockwise rotation via handheld control unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 7,00 mm Bending length: 1000 mm Number of rolls: 1   Max plate thickness : 7 mm Min. rolling diameter : 760 Max. rolling diameter : 600 Top Shaft diameter : 110 Lower rolls diameter : 120 Max. bending power : 350.000 N Rolling width        1,000 mm Rolling thickness prebending       7 mm Number of rolls     1 Number of driven rolls       1 Power     2.4 kW

Sheet thickness: 6,00 mm Bending length: 1000 mm Number of rolls: 1   MACH - ID 6112 Make:ROUNDO Type:PM 22 YOP:2007 Max plate thickness : 6 mm Min. rolling diameter : 160 Max. rolling diameter : 600 Top Shaft diameter : 110 Lower rolls diameter : 120 Max. bending power : 350.000 N Rolling width   1,250 mm Rolling thickness prebending      6 mm Number of rolls      1 Number of driven rolls    1 Power       5.4 kW

Other Info: Flanging machine MACH-id   4211 MAKE        ROUNDO FACCIN TYPE         SF 2 YEAR         2016 SPECIFICATIONS Throat      750 mm Maximum sheet thickness Steel      6 mm Maximum sheet thickness Alu     8 mm Max. Bank ø in the gap       1500 mm Max. Working length       60 mm Working speed         15/30 Power          5,5 kW DIMENSIONS Length       2400 mm Width         2100 mm Height         2200 mm Roundo SF-2 Flanging machine

Sheet thickness: 40,00 mm Bending length: 3000 mm Number of rolls: 4   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical  Hydraulic   3 or 4 roll   4 roll Maximum sheet thickness  40 mm Bending length  3000 mm Max. Rolling capacity Ø 2.500  38 mm Max. Prebending capacity Ø 2.500  25 mm Top Roll Ø  460 mm   Bottom Roll Ø  460 mm Side Rolls Ø  390 mm Power  55 kW  

Capacity: 13 t Stroke: 1500 mm Material thickness: 6 mm Diameter flange/disc maximum: 0 mm Day light: 0 mm MACH-id   4143 MAKE        ROUNDO Sweden TYPE          F 13 C YEAR         20... SPECIFICATIONS Throat        1500 mm Maximum sheet thickness Steel      13 mm Maximum sheet thickness Alu    15 mm Max. Bank ø in the gap       3000 mm Power         7.5 kW DIMENSIONS Length       3000 mm Width        2000 mm Height       2000 mm

Sheet thickness: 12,00 mm Bending length: 2500 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: PASS 270 Rolling width:                 2500mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:12mm Rolling thickness prebending:  8mm Top Roll Ø:                    270mm Bottom Roll Ø:                 270mm Side roll Ø:                   215mm Number of rolls:               4 Rolling speed:                 0 - 6 Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Control:      ...

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5428 MAKE        ROUNDO KUMLA SWEDEN TYPE          r-6 / z-60 YOP            1993 SPECIFICATIONS Horizontal and vertical          H + V Shaft Ø      100 mm Number of rolls       3 Resistance moment         56 CM³ Capacity flat         125 X 20 mm Capacity Tube        115 X 6 Ø x mm Capacity HEA-Profile       240 mm Working speed         7 mm/min. Control         PS/R DIMENSIONS Length        2000 mm Width  ...

Sheet thickness: 13,00 mm Bending length: 2000 mm Number of rolls: 4   Rolling width:                 2.000mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:13mm Rolling thickness prebending:  8mm Top Roll Ø:                    230mm Bottom Roll Ø:                 230mm Side roll Ø:                   195mm Number of rolls:               4 Rolling speed:                 5m/min Adjustiment lower roll:        100mm/min. Adjustment side rolls:         150mm/min. Number of driven rolls:        2 Power:    ...

Rounds: 105 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id    5347 MAKE         ROUNDO Sweden TYPE           R-4-S YOP              1988 SPECIFICATIONS Horizontal and vertical       H + V Shaft Ø        105 mm Power         11 kW Number of rolls        3 DIMENSIONS Length         1500 mm Width           1500 mm Height         1500 mm

Rounds: 180 mm Squares: 0 mm Flats: 0 mm Flats on edge: 00 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id    5346 MAKE        ROUNDO Sweden TYPE          R-6-S YOP            1992 SPECIFICATIONS Horizontal and vertical        H + V Shaft Ø     180 mm Power      15 kW Working speed       0-7 mm/min. DIMENSIONS Length        2400 mm Width          2000 mm Height         2000 mm

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id    5337 MAKE         Roundo Sweden TYPE           PAS 650 YOP             1991 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic          3 or 4 roll       4 roll Maximum sheet thickness       65 mm Bending length       3000 mm Max. Rolling capacity Ø 2.500       60 mm Max. Prebending capacity Ø 2.500        50 mm Top Roll Ø       650 mm Bottom Roll Ø     650 mm Side Rolls Ø      530 mm Working speed M/Min.    5 M/min. DIMENSIONS Length       7000 ...

Rounds: 225 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id      5165 MAKE          ROUNDO TYPE            R3 YOP             1995 SPECIFICATIONS Hydraulic / Mechanical       Hydraulic Horizontal / Vertical / or H + V      H + V Shaft Diameter ø     75 mm Roll diameter ø    225 mm Shaft length     100 mm Working speed M/Min.   1-5 M/min. Capacity IPN    140 x 750 mm Capacity Tube walltickness x Ø 60 x 750 mm Capacity  Flatt      75 x 75 x 750 mm Resistance moment Cm     314 Cm3 Power      4 kW DIMENSIONS Length      2000 mm Width& ...

Sheet thickness: 4,00 mm Bending length: 250 mm Number of rolls: 3   ROUNDO - PM-0 Quick rolling machine 250 x 4 mm MACH - ID 6320 Make: ROUNDO Type: PM-0 YOP: 1995 Rolling width    250 mm Rolling thickness 3  x toproll Ø4 mm Rolling thickness 5  x toproll Ø5 mm Top Roll Ø    100 mm Bottom Roll Ø  40 mm Number of rolls    3 Rolling speed     2/4 m/min Power      3.9 kW Dimensions Length      1.000 mm Width        1.900 mm Height       1.800 mm Weight       800 kg

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Make Roundo R 5 S Type R 5 S Year 1989 Section modus 48 cm3 Outside diameter max. (mm) Roll = 385 mm Inside diameter max. (mm) Power 7.5 kW Max. pipe length (mm)Flatt 100 x 30 Max. angle U over Y = 200 Wall Thickness (mm)U over X = 100 Speed 0 - 7 M/min.Set with rolls Hor. & Vert. opperated  

Sheet thickness: 25,00 mm Bending length: 2500 mm Number of rolls: 3   ROUNDO - PS 360 3 roll plate bender 2500 x 30 mm MACH - ID 6293 Make: ROUNDO Type: PS 360 YOP: 1978 Rolling width    2.500 mm Rolling thickness 3x toproll Ø     25 mm Rolling thickness 5x toproll Ø     30 mm Rolling thickness prebending      20 mm Top Roll Ø     360 mm Side roll Ø      340 mm Number of rolls       3 Rolling speed       0-5 m/min Power       30 kW Dimensions Length       4.500 mm Width         2.200 mm Height        2.400 mm Weight       20.000 kg

Capacity: 360 t Diameter: 140 mm Length: 0 mm Make Roundo R 5 S Type R 5 S Year 1989 Section modulus 50 cm3 Outside diameter max. (mm)Top shaft = 140 mm Inside diameter max. (mm)Lower shaft = 120 Max. pipe length (mm)Rolls = 360 Max. angle Power = 11 kW Wall Thickness (mm) Weight 4000 Kg Tube = 142 x 1.800 mm HEA = 140 x 900 mm Some tooling  

Sheet thickness: 18,00 mm Bending length: 3000 mm Number of rolls: 3   Make Roundo 18 mm Type PS 310 Year 1980 3 roll hydraulic plate bender Sheet thickness (mm) T = 18 mm Bending length (mm) L = 3.000 mm Number of rolls 3 roller Top roll = 310 mm Hydraulic opperated Dro positions side rolls  

Sheet thickness: 18,00 mm Bending length: 2550 mm Number of rolls: 4   Make Roundo 18 mm Type PS 280 Year 1988 3 roll plate bender Sheet thickness (mm) T = 18 mm Bending length (mm) L = 2.550 mm Number of rolls 3 roller Optical read out position Hardned rolls Hydraulic machine  

Sheet thickness: 5,00 mm Bending length: 1500 mm Number of rolls: 2   incl. 8 changeable spare rolls up to diameter. mm High production cylinders and tubes Very shortrolling times Very short straight ends and roundness tolerances Less dependence on plate quality than other machines Designed to prebend and roll the plate into a cylinders in one pass and short cycle time. Rolling width:                 1500mm Rolling thickness 3x toproll Ø:5mm Top Roll Ø:                    110mm Bottom Roll Ø:                 120mm Number of rolls:               2 Rolling speed:                 2,7 or 5,5 Length:              &nb ...

Rounds: 3 mm Squares: 185 mm Flats: 150 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machineROUNDO - R-7-S  Digital readout position rolls Hydraulic side supports 2 x  Number of rolls:  3 Stroke X-Axis:    500mm Resistance moment:185CM³ Capacity flat:    150 x 45mm Capacity Tube:    160 x 10Ø x mm Capacity bar:     100 x 100mm Capacity T-Profile:160 x 20mm Working speed:    0 - 5mm/min. Length:           2800mm Width:            2300mm Height:           1845mm Weight:           14500kg

Hydraulic machine Can work in horizontal and vertical positions 3 driven rolls Type: 3 rolls Dia rolls: 225 mm Dia of die mandrel: 75 mm Rotationspeed: 7 m/min Motorpower: 4 HP Length : 1000 mm Depth: 980 mm Height: 950 mm Weight: 1200 kg

v.v. CNC control system; foot pedal; remote control; Hydraulically adjustable

Description: Note: Roundo Type: PAS-460 Hydraulic: Yes Roller length: 4,200 mm Sheet thickness: 16 mm Number of rollers: 4 Diam. upper roller: ø480 mm Lower roller diameter: ø480 mm Side roller diameter: ø390 mm Bending capacity: 18 mm Powered rollers: 2 Hydraulic folding: Yes Hydraulic lifting: Yes Main motor power: 55 kW Bending capacity: 4200 x 14 - 18 mm Rolling capacity at diam. 1,500 mm: 4200 x 21 - 26 mm Rolling capacity at diam. 2,500 mm: 4200 x 25 - 31 mm Rolling capacity at diam. 3,500 mm: 4200 x 27 - 33 mm Rolling speed: max. 7 m/min Max lower roller load: 400 tons Max. load per roller: 200 tons with digital deflection weight approx.: 35,000 kg, Approx. Onsite Dimension. (l x w x h): 300 x 7,400 x 2,500 mm

3-shaft mechanically driven coiler for sheet metal. Roundo Sweden type PS 205. The machine rolls 5 mm black sheet, 8 mm aluminum, to a length of 2550 mm, the diameter of the rollers: upper and remaining 160 mm. A machine with the function of bending sheet metal with side rollers up to 4 mm, and with the function of rolling cones - side roller. Roller position readings. Beveling the side shaft on both sides, bending the lower and side shafts to create cones. Working speeds fast - slow up to 16 rpm. Weight 3580 kg. Power supply 5 kW.