Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping
* General * SKUR0090 * LocationBarneveld * MakeSchröder & Co (D) * Typemanufacturer plate is missing * No.30-392 * Main Features * MaterialStainless steel * Volume2 Ltr. * Motor2.2 KW * Specified Features - Scraped surface heat exchanger * Capacity2 Ltr. * Inletdia. 25mm * Outletdia. 25mm * With motor2.2 kW 230 Volt * With variable speed drivefrequency controller * Scraped surface heatexchangers * MaterialStainless steel * Cylinder sizesdia. 95x350mm * Inletdia.25mm * Outletdia.25mm * Motor2,2 kW 230 Volt * With variable speed drivefrequency controller * Information * Mounted on wheelscheck * With switchgearcheck * Floorspace1,3x0,4 M * Total height1,4 M * Weight260 KgScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...
* General * SKU354T1373 * LocationBarneveld * MakeSchroder Kombinator * TypeVEMK 01/108-350 * No.11/4053-1-182757 * Year of construction2002 * Main Features * MaterialStainless steel * Volume1.8 Ltr. * Motor3 KW * Specified Features - Scraped surface heat exchanger * MaterialStainless steel 1.4571 (316Ti) * Scraped surface heatexchangers * Mixercheck * Capacity1,8Ltr. * Information * Total height1,7m * Weight380kg * CEcheck * Floorspace1,7x0,65m * Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...
* General * SKUR0087 * LocationBarneveld * MakeSchröder & Co Maschinenfabrik (D) * TypeVWK 01/60-400 * No.110705 * Year of construction1989 * Main Features * MaterialStainless steel * Motor2.2 KW * Surface0.07 m2 * Specified Features - Scraped surface heat exchanger * MaterialStainless steel * Number of stages:1 * Heating surface0.07 M2 * Cylinder sizesdia.60x380mm * With jacketcheck * Inletdia. 25mm * Outletdia. 25mm * Motor2,2 kW 230 Volt * With variable speed drivefrequency controller * Information * Mounted on wheelscheck * With switchgearcheck * Total height1,4 M * Weight230 Kg * Floorspace1,4x0,4 MScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...
* General * SKU311P700 * LocationBarneveld * MakeSchröder&Co Maschinenfabrik (DE) * No.23-232 * Year of construction1984 * Main Features * MaterialStainless steel * Motor2.2 KW * Specified Features - Scraped surface heat exchanger * MaterialStainless steel * Scraped surface heat exchangerCooler * Number of stages:1 * Cylinder sizes+/- dia.80mm x350mm * Max. temperature-20 degr.C. * Inletdia.25mm (product), dia.25mm (Glycol) * Outletmissing * Motor2,2 KW, 220/380 Volt * With variable speed drivecheck * With variable speed drivecheck * Information * Mounted on framecheck * Mounted on wheelscheck * With switchgearcheck * Floorspace1,4x0,7 M * Total height1,3 M * Weight150 KG * Technical specs * Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machi ...
Type: UTK 18 200-2a-2e Power: 2 X 11 kW + 1 X 7.5 of kW, 380 V, 50 Hz Perslucht: max 20-25 bar Weight: 4,000 kg YOM 1985 Scraped surface heat exchanger for heating, temperature holding and cooling of liquid, vegetable, high viscous and crystalline products. Previous used for heating, holding (volume ± 85 ltr) and with steam cooling of food products (sauces) and ammonia (NH3, 125 ltr., 17 bar,-20 ° C / 45 ° C). 2 independent ammonia system. Constant quality of the product, continuous running and inline cleaning system (CIP).
Dough knitting machine - Make: SCHNÖDER - Model: FORTUNA Automat Gr. 3 - With new working plate - Condition: Used, restored - Warranty: 6 months
Dough dividing and moulding machine Make: SCHRÃ?DER Model: FORTUNA A-3 slot 30-piece set With 3 new casting plates -top obsolete -with warranty -Delivery: free house within Germany
Dough dividing and moulding machine Make: SCHRÃ?DER Model: FORTUNA A-3 slot 30-piece set With 3 new casting plates -top obsolete -with warranty -Delivery: free house within Germany
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz
Type: SCHRODER N 120 Number of needles: 120 Diameter of needles: 3 mm Product width: 620 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 120,0 Width with filter for brine: 200,0 Length: 220,0 Height: 225,0 Compressed air: 6,0 bar Power: 14,0 kW Voltage: 380 V, 50 Hz
Type: : Schröder N 138 Number of needles: 138 Diameter of needles: 4,0 mm Product width: 620 mm Transportation type: walking beam Product passage height: 200 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Length: 220,0 Height: 230,0 Power: 10,0 kW Voltage: 380 V, 50 Hz
Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.
Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300
Type: N 50 Number of needles: 50 Diameter of needles: 4,0 mm Max. product width: 350 mm Transportation type: walking beam Product passage height: max 180 mm Brine pressure: 0,5 - 4,0 bar Machine dimensions in mm: Width: 800,0 Length: 1600,0 Height: 1900,0 Power: 8,0 kW , 17 A Voltage: 380 V, 50Hz
Inline homogenizer Manufacturer: Gerstenberg Schröder Type: RL 280/170 Built: 2006 N°: 4299-2-197917 Power: 50 hp Volume: 6 l Speed: 1330 rpm at 50 Hz as good as new Weight: approx. 850 kg Application: Margarine, mayonnaise, dressings, sauces (continuous production) Capacity: 5000-10000 kg/h (for oil content 80%) LWH: 1800 x 800 x 900 mm
SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.
Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.
Microcut/ continuous cutter, colloid mill. High-performance machine for use in continuously operating process lines. Product - Mounting funnel: capacity 30 liters completely in V2A Nirosta stainless steel, 3 different perforated discs - inserts and 5 sets - knife blades
working width: 2520 mm for sheets up to: 2.5 mm Opening width upper cheek: approx. 250 mm Adjustability bending cheek: 30 mm Upper cheek drive: 1.5 kW Lower cheek drive: 2.3 kW electr. Connection: 380 V kW Weight: 2300 kg Space requirement: 3300 x 1400 x 1430 mm
sheet width: max. 1500 mm plate thickness: 2,5 mm serial number: 150393 weight: 1300 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SCHROEDER Plate shears Product number 821741 Manufacturer SCHRODER Model / type unknown Year of manufacture 1998
Product number: 2471J TypeI: MAX420 Serial number: 4201 1061 Year of construction: 2006 Needles: 108 pieces of 3 mm Walking beam: 420 mm Advance:50/100 mm Product height: max 140 mm Cycles: 15 to 60 per minute Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16kW Dimensions: 2300 x 2200 x 2300 mm Including rotating filter
Schröder Curing Oven - Width: 130 cm - Depth: 160 cm - Height: 190 cm Good condition fully functional can be visited and tried on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before buying and tested under electricity. Please ask questions before purchasing to avoid ambiguity. For general questions or an appointment for a visit, I am always available at the telephone number below or above. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.