Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.
multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.
Number of spindles 8 Controller Siemens 810D Chuck diameter: 130 mm Max part diameter: 135 mm Total stroke: 125 mm Working length: 100 mm
Schütte 32 multi-spindle lathe, completely rebuilt by GWM-Tech, Fanuc AC motors, FANUC motors for threading, PLC, pick-up spindle chuck, bar loader Cucchi Pietro
Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff“ gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised
Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length * width (standard execution) 3705 * 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod ...
8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length * Width (in standard performance) 3705 * 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ...
Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide
Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle
Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length * Width (in standard performance) 3705 * 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide ...
Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...
• Siemens 840 C controller • Location I + III + IV + VI: Longitudinal and transverse slide • Position II + V: CNC slide and longitudinal slide Bvxhlj3gi3 • Advance position VI • Interceptor Position VI • KS system (emulsion) • Loading magazine Cucchi model Multi-6 156C15, YOC 2015, • Ruez hinge belt conveyor in the machine bed • Hinge conveyor Knoll 280 S-1/40 ID 26565 (outside) • Electrostatic separator ISI RON/A 2500A, ID 26295 • Without further accessories / tools • CUCCHI BLT Model Multi -6 YOM 2015
Country of origin: Germany, Number of spindles: 8, Auto bar loader: Cucchi BLT - bundle magazine
Technical data Number of spindles: 6 Capacity round bar: 26 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 40/33P Coolant system Thread rolling attachment: 1 x Longitudinal slide number: 2 Drilling unit with independent feed: 6 x Appareil à rouler les filêts à commande mécanique Tool break control Turret number of tools: 6 x Threading attachment: tangent.
Technical data Number of spindles: 6 Capacity round bar: 20 mm Capacity square bar: 14 mm Capacity hexagon bar: 17 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: stepless from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Bar feeder: CUCCI Threading attachment: OERTLINGHAUS Coolant system Chip conveyor: KNOLL Toolholders
Technical data Number of spindles: 6 Capacity round bar: 42 mm Capacity square bar: 30 mm Capacity hexagon bar: 36 mm Max. stroke of long slide: 125 mm Machining rate: from: 0.9 sec up to: 280 sec Spindle speeds: number (steps): 49 from: 140 rpm up to: 2240 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 6516 mm Width: 1588 mm Height: 2100 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 40/35 P (1999) Pick-up spindle Toolholders Boring tool holder Back operating device
Technical data Number of spindles: 6 Capacity round bar: 13 mm Max. advance of bar: 63 (125) mm Max. stroke of long slide: 50/31.5 mm Machining rate: from: 0.24 sec up to: 75 sec Spindle speeds: number (steps): 47 from: 560 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 3400 kg Overall dimensions machine: Length: 3055 (5161) mm Width: 930 mm Height: 2500 mm Various accessories: Bar feeder Set of toolholders Chip conveyor
Technical data Number of spindles: 6 Capacity round bar: 20 mm Capacity square bar: 14 mm Capacity hexagon bar: 17 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: stepless from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Coolant system Chip conveyor
Technical data Number of spindles: 6 Capacity round bar: 42 mm Capacity square bar: 30 mm Capacity hexagon bar: 36 mm Max. stroke of long slide: 125 mm Machining rate: from: 0.9 sec up to: 280 sec Spindle speeds: number (steps): 49 from: 315 rpm up to: 2240 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 6500 mm Width: 1400 mm Height: 2100 mm Various accessories: Bar feeder Chip conveyor
Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...
8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo
8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo