used SCM for sale

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

– Italian production –Ce – automatic table positioning – year of production 1999 TECHNICAL PARAMETERS: grinding width 900 mm grinding height 165 mm 2 steel shafts pneumatic oscillation electric height adjustment two types of feed speed engine power 11 kW minimum element length 300 mm connection diameter 2 x 160 mm dimensions of the machine (L/W/H) 150 / 115 / 200 cm weight 700 kg

SCM F410 planer Working width 410 Length of worktops 2610mm 4 knife shaft Shaft with traditional knives Angled fence 3kw power main motor Power supply: 380V Extraction nozzle 110mm Weight 700kg

Thicknesser SCM S520 Working width 520mm Working height 250mm Feed speed adjustable: 4 degrees Shaft with traditional knives 4-knife shaft Power 4kw Weight: 670kg

Width of the feed carpet 300 mm Max saw blade diameter 350 mm min. cutting length 390 mm variable cutting speed, feed carpet speed adjustable 6-48 m/min Power 25,5 kw 35 hp 35 HP

Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm

Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit

Spare parts of the SCM group directly from Italy

Used sliding table saw Int. Art. Ref. m3495 Manufacturer: SCM Type SI 300n max. saw blade 315 mm Year of construction 2002 With scoring machine Carriage length 3.20 m Weight approx. 1,050 kg Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carrie ...

Code: N0750 Brand: SCM Model: CLASS SI 400 EP - CE Standard Electronic-programmed circular saw with tilting blade - CE Standard Technical data Blade diameter mm 400 Cutting height mm 140 Programmed blade lifting and tilting Scoring unit Main blade motor Hp 9,5 Scoring unit motor Hp 1,7 Carriage length mm 3800 Start/stop buttons integrated in the sliding carriage Electronic position reader for parallel guide with manual movement

5-axis CNC machining center SCM Record 110 AL TVN Prisma Travel of the X-Y-Z axes: 3500 x 1815 x 440 mm Working area: 3110 x 1250 mm Prisma K: Milling unit with 5 interpolating axes Electrospindle with tool holder HSK F 63 Drilling unit controlled by the inverter of the electrospindle 12 independent vertical spindles (7 on the right and 5 on the left) 6 horizontal spindles (2+2 "X" right/left along, 1+1 "Y" right/left along) Rapid 16 car. Tool change for 16 tools, travelling in X-axis TVN workbench / upholstered / high-voltage vacuum DIGITAL 2 independent vacuum fields for machining in the pendulum process Vacuum pump with 250 m³/h capacity (5.5 kW) CNC control NUM, operating system Windows XP with 17" LCD display User Interface XILOG Plus CNC controlled central lubrication additional extras included Positioning aid 4 pcs. Lifting aid for loading and unloading large work ...

Code: 0567 Brand: SCM Model: MULTIFLEX C Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 Technical data Automatic carriage with chipbreaker End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions of assembled machine: mm 2050 x 3900 x 2000 h Overall dimensions for transport: mm 2050 x 2600 x 2000 h Weight kg 2200

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

SPECIFICATIONS: Max. gluing height mm: 55 (polyurethane glue) Workpiece length min. mm: 250 Aggregates: Headjoints/Milling Cutters/Cutters Rounding unit/edge cutter Edge trimmer

SCM Sintex NTE four-sided planer Working width 23 – 180mm Working height 6 – 105mm Number of spindles: 4 Spindle system Bottom 7.5kw Rights 7.5kw Left Mountain Spindle speed 6000r.p.m Spindle diameter 35mm Electric up-down and width adjustment of heads Feed rate: 6-12 m/min CE Certified Extraction pipes 1x150mm 2x120mm Machine weight: about 1000kg

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Multisaw SCM M2 cutting width 220 mm cutting height 120 mm Motor power: 18.5 kW Saw hole diameter 70mm Maximum saw size 350mm Feed regulated on variator Feed speed adjustable in the range of 6-48m / min Anti-jet ratchets Central track lubrication Machine weight: 1450kg

Wide-belt sander SCM Sandya Uno Main engine 7.5kw Feed motor 0.3kw Two grinding units Working width 900mm Pneumatic oscillation Spotted shoe Dimensions 1420mm 1790mm 1590mm Weight 1050kg

– Italian production – year of production 2000 –DTR TECHNICAL PARAMETERS: track width 300 mm cutting height 120 mm engine power 25 kW .max. disc diameter 350 mm .max. element width 1000 mm Min. element length 400 mm feed adjustable on the inverter ruler on the right side pneumatically adjustable revolver scale setting 6 types three rows of anti-jet latches possibility of putting on a board - shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts connection diameter 180 mm and 120 mm machine dimensions (L/W/H) 210 / 175 / 160 cm weight 1800 kg

–DTR – Italian production TECHNICAL PARAMETERS: track width 300 mm cutting height 120 mm .max. disc diameter 350 mm engine power 30 kW table width 750 mm Min. element length 600 mm feed adjustable on the inverter two rows of anti-jet latches possibility of putting on a board - shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts connection diameter 200 mm dimensions of the machine (L/W/H) 155 / 165 / 160 cm weight 1800 kg

– Italian production – year of manufacture 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal bottom 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2 and 3 spindle) 11 kW 4) horizontal top 230 mm 7.5 kW all spindles up/down, right/left spindle diameter 40 mm from above 3 insertion rollers pulling metal, swivel including 2 double pulling lead shaft from above, double rubber on the side, pressure 1 pc. in the lower table top a rubber pulling roller feed on cardan rollers pneumatic clamps infinitely variable feed speed 5-22 m/min feed motor 1,1 kW electrical setting of planing thickness lifting engine 0,37 kW introductory table length 2470 mm enclosed in the cabin central lubrication of the table top extraction pipe diameters 150 and 180 mm dimensions (L/W/H) 3650 / 1200 / 1600 mm wei ...

– after technical inspection – Italian production – year of manufacture 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 bottom spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 bottom spindle 5.5 kW six upper pulling rollers pneumatic pressure feed adjustable on the inverter feed speed range 5-25 m/min adjustable heads table top length 2480 mm electric brakes connection diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (L/W/H) 340 / 160 / 170 cm weight 2480 kg

CATALOG NO. 6956 TECHNICAL SPECIFICATIONS - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 3) vertical left 130mm; (2 and 3 spindle) 11kW - spindle 3 electrically adjustable right / left 4) horizontal top 230mm 11kW - 4 electrically adjustable spindle up/down 5) horizontal bottom 230mm 7,5kW 6) universal 230mm, adjustable at an angle of 360° 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - from above 5 insertion shafts pulling metal, toothed including 3 double - from above 5 pulling shafts, smooth, rubber including 2 double - from the bottom 2 rubber rollers, pulling - 2 side clamps from the bottom - smooth regulation of feed speed - pneumatically pressed shafts - feed motor 3kW - electrical setting of planing thickness Bvzmbmkp - body lifting ...

Catalog No. 6804 TECHNICAL DATA - max width of the workpiece 240mm - max height of the workpiece 130mm - spindle diameter 40mm 4 spindles: 1) horizontal bottom 240mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 5.5kW 4) horizontal top 240mm 4kW - all heads adjustable up / down, right / left - all spindles equipped with an electric brake - from above, 4 metal, toothed introductory rollers - rubber, smooth, pulling roller from above - rubber, sliding roller at the bottom - 2 types of feed speed - feed motor 1.25kW - feed on cardan shafts - rollers pressed pneumatically - length of the introductory tabletop 2500mm - electric planing thickness setting - diameter of the exhaust connection 3x120mm, 150mm - dimensions length/width/height 3900x1650x1600mm - weight 1640 kg – Italian production – technical documentation – unpainted - ...

Four-sided planing and roll forming machine SCM COMPACT P max. working width ( finished dimension ) 230 mm max. working height ( finished size ) 120 mm Motor power dressing spindle 4 kW Motor power vertical spindles 5.5 kW Motor power upper horizontal spindle 4 kW Profile depth 20 mm Infeed table length 2500 mm Motorized height adjustment of the feed system Feed element before dressing Positioning of the working units: The working units are adjusted at the front of the machine with a mechanical digital display of the position Manual pump for lubrication of the work table Machine is WORKSHOP OVERHAULED IN TOP CONDITION 1 set of planing tools for FREE

SPECIFICATIONS: Width of work tables mm: 500 Length of work tables mm: 2,600 Number of blades: 4 Diameter mm 120 Installed capacity KW: 4,0

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

CNC machining centers for drilling, staping, milling, wedge grooves. Working range: 4400 x 300 mm Max working width mm: 210 Max material thickness mm: 100

With feed and vacuum pump

--------------------

I sell a wide belt grinding machine SCM Sandya 16 S 110, built in 2012. Configuration: 18.5 KW hard-rubber grinding cylinder 15 KW hard-rubber grinding cylinder 11 KW combi unit soft-rubber cylinder + pneumatic shoe. Working width 1100mm. Pressure rollers for short elements. Compressed air Clean for all units. Weight 2750kg 3 motors 18,5 + 15 + 11kW Incl. full documentation. Condition AS NEW ! The machine did very little work. Available the same.

SCM Superset XL four-sided planer Working width 230mm Working height 130mm Number of spindles: 7 Spindle system Bottom 9kw Rights 9kw Left 9kw Mountain 9kw Bottom 9kw Rights 7.2kw Left 7.2kw Spindles adjustable in two planes Spindle diameter 40mm Feed speed adjustable on the inverter Drive on cardan shafts Pneumatic clamps

SCM Superset XL Four-Sided Planer + Feeder Working width 230mm Working height 140mm Number of spindles: 5 Spindle system: Bottom 5.5kw Rights 5.5kw Left 5.5kw Mount 7.5kw Universal 360° 7.5kw Drive on cardan shafts Variator speed adjustable 6-25m/min Pneumatic clamps SACOT feeder for short parts Spindles with brakes A set of planing heads Complete technical documentation CE Certified

Planer SCM F520 Class Working width 520mm Electric planing height adjustment 4-knife shaft Traditional knives Sampler adjustable at an angle of 45 Worktop length 2990mm Extraction connection 115mm Motor power 4kw

Planer SCM F520 CE Working width 520mm 4kw motor 4-knife shaft Traditional knives Hydraulic raising and lowering of the worktop Main sampler adjustable at an angle up to 45 Length of table tops 3000mm CE Certificate

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

calibrating sanding machine SCM SANDYA 16S - 135 second hand machine carpet in rubber max. working width mm. 1350 machine composed by 2 belts : 1° belt : roller in rubber diam. mm.200 . shore 80 2° belt : combined roller in rubber diam. mm.160 . shore 35 + electronic pad belts size mm. 2620 x 1370 motor power Hp 20 volt. 380/50

Working width: 410 mm Length of the planing table: 2.200 mm Number of knives: 5 St. Motor output: 5 kW weight of the machine ca.: ca. 411 kg : Tersa : Ja Dust suction hood: 120 mm turning speeds: 5.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 410 mm Length of the planing table: 2.600 mm Number of knives: 4 St. Motor output: 4 kW Dimensions (L/W/H): 2.600 x 1.400 x 1.200 mm weight of the machine ca.: 561 kg : Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 520 mm Working height: 240 mm Motor output: 7 kW Number of knives: 4 St. Feed speed: 5/8/12/16 m/min. weight of the machine ca.: ca. 500 kg : Tersa : Ja Dust suction hood: 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 520 mm Working height: 300 / 3,5 mm Motor output: 7 kW Number of knives: 4 St. Feed speed: 5/8/12/18 m/min. weight of the machine ca.: 680 kg Dust suction hood: 150 mm : Tersa turning speeds: 4.500 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 ° Length of the rolling table: 3.200 mm cutting width: 1.270 mm Motor output: 5,5 kW Cutting height: ca. 103 mm mm Saw blade diameter: 350 mm Speed: 4.000 U/min. weight of the machine ca.: ca. 800 kg : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 240 mm Working height: 120 mm Dimensions (L/W/H): 4900 x 1700 x 1700 mm weight of the machine ca.: 3500 kg Control: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts 14 axis control with touch screen - WINDOW VERSION Machine with 6 spindles Spindle speed 8,300 rpm Working width 240 mm, working height 120 mm Electronic horizontal and vertical positioning of the spindles Glazing bead cutting Touchscreen controls Detailed technical description, see adjacent PDF documents. Suction nozzle diameter: 1. Spindle down: 120mm 2nd spindle right: 120 mm 3. Left spindle: 120 mm 4. Spindle top: 150mm 5. Spindle top: 150mm 6. Spindle below: 120mm Option: workpiece return to the operator Images are from our archive of a machine of the same model. (Technical information according to the manufacturer - without guarantee!) The data for t ...

Workpiece dimensions: , mm Total length: 5500mm mm Feed speed: 37 m/min. Workpiece return RP-S NT --------------------------------- Return device with tubular steel construction with high resistance to guarantee of robustness and solidity over time. A powered conveyor belt for the Workpiece transport to the operator. The conveyor belt is equipped with brakes equipped with wheels. 9 rolls processing width 220 mm Length 2500mm adjustable height 900 mm Roller diameter 60 mm with adjustable Inclination 0°-15°, variable center distance, at least 200 mm Unloading chute depth 900 mm 9 inclined idler roller aggregates with adjustable width and variable center distance from at least 200 mm Driven belt with a width of 300 mm Length 5500mm Motor 0.37 KW speed 37 m/min --------------------------------- (Technical information according to the manufacturer - without guarantee! The data for this ad ...

Number of spindles: 6 St. Working width: 240 mm Working height: 200 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min. SCM Superset NT PLUS Comp. 31 for window production ----------------------------------------------- Technical data: ----------------------------------------------- Working width: max 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----------------------------------------------- First lower spindle horizontal Motor with brake 11 KW Diameter: 40mm Speed 6,000 rpm Fast tool clamping T-SET 2. HSK tool holder ----------------------------------------------- First right tool holder vertical Motor with brake 7.5 KW Speed 8,300 rpm Vertical and horizontal electronic positioning 3. HSK tool holder ----------------------------------------------- First left tool holder, vertical Motor with brake 7.5 KW Speed 8,300 rpm Vertical and hori ...

Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible.

Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg.