Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm
Universal machine Manufacturer : Stephan Type: UMC 12 F Capacity: 12 liters Technical data : Bowl capacity 12 litres, batch capacity 2-7 litres, standing on stainless steel table Bowl stainless steel, lid stainless steel up to 3000 rpm. frequency-controlled Vacuum-proof Double jacket for cooling/heating Manual wall stripping suitable for mixing, crushing, emulsifying Very good and functional condition.
Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available
Stephan UM44-S Universal Machine three speeds (700/1450/2900rpm) Pulse switch with mixed insert -tiltable for removal of the processed medium -neat condition, should still be thoroughly cleaned before use Video about test run and more pictures available
Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available
Stephan UM44 Universal Machine two speeds 1440/2890rpm Kill switch with knife insert -tiltable for removal of the processed medium -Engine brake adjustable in power and time -neat condition, should still be thoroughly cleaned before use Video about test run available
Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches The machine is in very good condition, but must still be thoroughly cleaned before use. neat and smooth running Viedo available via test run
Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available
Stephan UM44-S Universal Machine two speeds 1410/2820rpm Impulse switch with knife insert UM44-S was made UM44 by removing the lateral drive from the previous owner, the openings were closed with stainless steel sheets -tiltable for removal of the processed medium -neat condition, should still be thoroughly cleaned before use Video about test run and further pictures available
Stephan UMB40 Universal Machine with two speeds 1420/2870 rpm Use of knives as well as additional work Machine tiltable for removing the processed medium Stainless steel bowl Power lever and engine cover should be repainted
Stephan UM44 Universal Machine two speeds 1450/2900rpm Pulse button with knife insert -Tiltable for removing the processed medium -in good condition, should still be cleaned thoroughly before use Video about test run available
Stephan UM25 Universal Machine two speeds 1440/2900 rpm Knife insert (blades are to be sharpened) Stainless steel boiler with double jacket (electrically heated, but without function) Machine tiltable for removing the processed medium Machine in very good condition Video about test run available
Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches Machine must be thoroughly cleaned before use. the frame and the engine cover should possibly get a new paint neat and smooth running Viedo available via test run
Stephan UM12 Universal Machine Two speeds: 1420/2810rpm Stainless steel boiler with double jacket and temperature sensor socket, removable Stainless steel lid with sight glasses and vacuum connection Manometer Machine is in good condition and runs neat and quiet should be cleaned thoroughly before use Video about test run available
Stephan MCV10 Microcut, continuous cutter, colloid mill, koial mill, emulsifier Voltage: 400V Speed: 2850rpm Stainless steel funnel Machine heavily soiled and with rust deposits on the housing without nameplate very loud run, because bearing damage, therefore sale as spare parts donor or hobbyist object Video about test run available
Stephan UM25 Universal Machine three speeds 720/1430/2880 rpm Mixed insert blunt Stainless steel boiler with double jacket Machine tiltable for removing the processed medium Machine in very good condition Video about test run and other pictures available
Universal machine Manufacturer: Stephan Type UMC 5 Capacity 5 liters Power 0.75 kW 300-3000 rpm. infinitely variable Manual wall stripping cool/heated Stainless steel bowl Ready-to-use state
Laboratory processing plant Manafacturer: Stephan Type: UM-12 (universal machine) No.: 714.381.07 Power: 1.5 kW Year of construction: 1989 with various mixing tools and spare parts LWH: 410 x 400 x 600 mm LWH (housing): 950 x 450 x 360 mm
Laboratory processing plant (universal machine) Manufacturer: Stephan Type: UMC 12-F No.: 712.673.01 Built: 1986 Power: 1.8 kW 380 V, 50 Hz 150-2800 rpm speed-controlled with double jacket, sight glasses with new control cabinet very good condition on request: with small vacuum pump LBH system: 500 x 400 x 640 mm LBH control cabinet: 600 x 600 x 220 mm LBH pump: 270 x 220 x 210 mm
with vacuum pump speed-controlled FU with double coat Panel mobile cart Temperature gauge Manual Spare parts Dimensions LWH: 1000 x 700 x 1300 mm Weight: approx. 150 kg
Vakummic Stephan Type: VM 100 for 100liter made of stainless steel analog control with timers Boiler is tiltable excellent for mixing ingredients/ salads/ minced meat on rolls Condition: Good
Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion
Stephan Feinstzerzerer Type: MCH-D 60 Drive: 49 KW performance in the hour depending on the desired fineness of the starting product. From 2000 to 3500 Kg/hour This machine is ready for operation, as from the customer. With used but outdated cutting sets
Stephan Feinstzerzerer Type: MCH-D 50 Drive: 44 KW performance in the hour depending on the desired fineness of the starting product. 1500- to 3000 Kg/hour The machine is ready for operation as if from the customer. With new cutting kit
Stephan Emulsifier / micro-cut Type: MCH.D 180 year.: approx. 1993 capacity per hour: approx. 2500-up to 8500 kg (product dependant) funnel version With feeding screw on the motor shaft Cutting set diameter: 180 mm including new blade sets. Cutting head: level 1, Z 24 Cutting ring: level 1, gap of 0.2 mm to 3.0 mm. Cutting head on request: level 2, Z 24. Cutting ring: level 2, gap size on request from 0.2 mm to 3.0 mm. price of the machine: 32.900,00 with new blade sets; 24.900,00 without blade sets. Emulsifying, cutting without metal abrasion!
Stephan Shredding Machine Type: MCH-D 60A or MCH-D 30 Machine almost complete Nirosta Product-contact parts 100% Nirosta Power: Approx. 45 KW Product output approx. 2000 Kg hour MCH-D 30 Product output approx. 4000 Kg hour MCH-D 60
Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, cream cheese, etc.! Machine completely made of stainless steel Electronic control Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with meter, Dosing device with weighing system for weighing the aggregates, direct steam injection, steam filter cleaner station Complete work platform Further information on request Machine is offered as is! A complete overhaul/refurbish by us is possible for an extra charge Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, etc! Machine made entirely of stainless steel Electronic control system Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with counter, Dosing device with weighing syste ...
Used Stephan Combicut TC300SK Specific for process cheese/melt cheese Main Features: WORKING PRESSURE / TEMPERATURE: 0.5 BAR / 95°C - 115 °C EXECUTION ORIGINAL STEPHAN UNDERFRAM – COMPLETE STAINLESS STEEL PROCESSING DRUM – STAINLESS STEEL CHARGING SLIDE – STAINLESS STEEL CHARGING HOPPER – STAINLESS STEEL DISCHARGING VALVE – STAINLESS STEEL CHARGING VALVES FOR BOTTEROEL OR OTHER LIQUIDE PRODUCT – STAINLESS STEEL MAIN ENGINE 2 SPEED: 60KW (1500/3000RPM.) MAIN MOTOR SEALING - WATER COOLED WORKING TOOLS MAIN MOTOR: 3 KNIVES GEAR MOTOR SEALING - WATER COOLED WORKING TOOLS GEAR MOTOR: 7.5KW MIXING ARM WITH WALL AND COVER SCRAPER COMPLETE VACUUM POMP SYSTEM VACUUM DOM FOR COOLING AND DEHYDRATION – STAINLESS STEEL ELECTRONIC CABINET – STAINLESS STEEL PLC CONTROLL UNIT SYSTEM WITH DISPLAY (NEW SIEMENS S7 ) SAFETY CO ...
Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, cream cheese, etc.! Machine completely made of stainless steel Electronic control Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with meter, Dosing device with weighing system for weighing the aggregates, direct steam injection, steam filter cleaner station Complete work platform Further information on request Machine is offered as is! A complete overhaul/refurbish by us is possible for an extra charge Contact: 01722894884 infoweyrauch-maschinen.com Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, etc! Machine made entirely of stainless steel Electronic control system Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing syst ...
Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...
Stephan Kutter UMB 120 E, motor 30 Kw. + 2 Kw., tiltable, capacity 120 ltr., incl. spare blade 1 set, very good condition
Stephan Vertical Veg Cutter Missing blade Please message for more details
Product number: 2681 Type: Alvac-11-DG Serial number: 0014-5167 Year of construction: 2004 Chamber size: 500 x 500 x 200 mm Seal bar: 500 mm Pump: Busch, 63 m³/h Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 800 x 60 x 1000 mm With gas flush
The frame mounted inline Stephan Microcut MCH 20K is suitable for a wide range of applications in the food industry. It combines efficient mixing, fine cutting and emulsifying in one simple operation with minimum space requirement. Typical applications such as: emulstions, dressings, sauces, mayonaisse, ketchup, liquid products and pureed food. Previously used in a processed cheese / vegan cream cheese plant. Rotor - stator principle. Efficient fine grinding. Perfect cut. Homogenous mixing. Stable emulsions. Constant product quality. In the microcut there is no metal-to-metal contact of the cutting elements.Infeed hopper (± 120 liter) with feeding spiral with gear motor for high viscose products and big pieces, who moves the product to the cutting / emulsifiying set. Capacity up to 1.200 kg per hour, depending on product and desired particle size. Motor: 15 kW - 380 V - 27,5 A - 2.925 r ...
Stephan Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Previously used in the processed / melted and cream cheese production (vegan as well). Machine bowl with top slide and a bottom valve, lid and side covers are all made of stainless steel. Machine frame in painted steel. The bowl is equiped with a double jacket for heating/cooling on the jacket including all valves, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 3x twin cutting blades, max working pressure in the bowl -1 / 0,3 bar (protected with overpressure valve), max temperature in the bowl 95 °C, bowl volume: 300 liter, 1x infeed hydraulic slide gate on the top for main product including big up and down movable hopper (hydraulic), 1x outfeed valve at the bottom for the outfeed o ...
STEPHAN Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating/cooling on the jacket, 3x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor (PT-100) inside the product, 2x mixing blades, max working pressure in the bowl 1,5 bar, max temperature in the bowl 127 °C, vacuum connection on the bowl, dearation connection on the bowl, pneumatic outfeed valve connecting for emptying the bowl without tilting (valve itself excluded), scraper of the wall is electric driven (slow turning), 3 manual tightening clamps. Main motor for the cutting knife: 380 Volt - 50 Hz - 10 / 17 kW - 720 / 1.470 rpm - 28 / 36 Amp. Stand alone main operation and control panel with relay controls and on/off switches., Type of Machine: Universal machin ...
Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), stainless stee ...
General SKU300U600 LocationBarneveld MakeStephan TypeKG 150 P No.B 715.817 Year of construction1989 Main Features MaterialStainless steel Motor1.8 KW Specified Features - Sieve granulator MaterialStainless steel 1.4016, Stainless steel 1.4301 (304) Granulating sievecheck Gratercheck Rotor sizesdia. 175x135 mm Sieve sizesdia. 178x145 mm Sieve perforation0,6 mm With hoppercheck Inletdia. 100 mm Outletdia. 300 mm Motor1,8 kW 380 Volt With variable speed drivecheck Speedmax. 284 rpm With extra sieves0,8 mm , 2 mm (2x),3 mm (2x), 4,2 mm Information Mounted on wheelscheck With switchcheckSieve granulatorsStephanSieves > Sieve granulatorsBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...
General SKU408S980 LocationBarneveld MakeStephan TypeKG 150-S No.712.730.04 Year of construction1987 Main Features MaterialStainless steel Motor1.8 KW Specified Features - Sieve granulator Gratercheck With hoppercheck Inletdia. 100 mm Outletdia. 290 mm Motor1,4/1,8 kW 380 Volt Speed142/284 rpm MaterialStainless steel Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight200 Kg Floor space0,9x0,8 M Total height1,4 MSieve granulatorsStephanSieves > Sieve granulatorsBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
STEPHAN vacutherm stainless steel machine with emulsion pump 450 liter capacity Description The STEPHAN Vacutherm® system is a compact process unit. It has been designed primarily for the production of prepared food. Several process steps are combined in one machine. Liquid and solid ingredient processing as well as particle incorporation can be performed. The STEPHAN Vacutherm® system has been developed and optimized in collaboration with manufacturers of prepared foods. Precisely controlled processes result in high product quality and repeatability. The highly flexible system produces a wide range of food products. The compact system combines several process steps in a single machine. These are mixing, dispersing, downsizing, heating, cooling, pasteurizing, deaerating, and emulsifying. Liquid and solid ingredient processing as well as particle incorporation can be performed. In add ...
STEPHAN double body mixer with vacuum. 600 liters capacity Description The STEPHAN Vacutherm system is a compact process unit. It has been designed primarily for the production of prepared foods. Several steps of the process are combined in one machine. The processing of liquid and solid ingredients can be done, as well as the incorporation of particles. The STEPHAN Vacutherm system has been developed and optimized with the collaboration of prepared food manufacturers. Precisely controlled processes result in high quality and product repeatability. The highly flexible system produces a wide range of food products. The compact system combines several process steps in one machine. These are mixing, dispersion, size reduction, heating, cooling, pasteurization, deaeration and emulsion. The processing of liquid and solid ingredients can be performed, as well as the incorporation of particle ...
Used Stephan Model UM 12 high intensity/universal vacuum mixer. Stainless steel jacketed mixing bowl has total capacity 15 litre, working capacity approx. 12 litre. Bowl rated -1/atmospheric pressure at 95°C max. temperarure. Stainless steel nonpressure jacket capacity 0,8 litre, 95°C max. temperature. Has bottom S-blade type of agitator driven via dual speed el. motor 1.5/1.9 kW, 1420/2810 rpm, 50 Hz, 400 V. The vessel has top entry manual teflon wall scrapper. Integrated el. switchboard with local control panel. Also includes vacuum pump DVP Vacuum Italy model LB.5WR and el. heater Thermo Haake model C10 with circulation pump for heating jacket.