used TOS for sale

Inv. Num. : 6037 Type: WH 63 Producer: TOS Created: 1970 Parameters: Work table length: 900 mm Work table width: 800 mm Cone: MORSA Equipment: Front panel Lifting device (125 kg)

Inv. Num. : 6254 Type: W75 Producer: TOS Created: 1987 Parameters: Work table length: 950 mm Work table width: 950 mm Spindle diameter: 75 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 560 mm

Inv. Num. : 7372 Type: WHN 9B NC Producer: TOS Created: 1980 Parameters: Control system: HEIDENHAIN TNC 360 Work table length: 1000 mm Work table width: 1120 mm Maximum table load (uniform): 3000 kg Spindle drive power: 20 kW Maximum spindle speed: 1120 1/min X-axis travel: 1250 mm Y-axis travel: 1000 mm Z-axis travel: 900 mm Spindle diameter: 90 mm Machine weight: 12000 kg

Inv. Num. : 7192 Type: BU 28/630 CNC Producer: TOS Created: GO 2004 Parameters: Total power requirement: 10 kVA Maximum grinding length: 630 mm Tip stroke: 140 mm Maximum weight of the workpiece: 65 kg Distance between tips: 630 mm Machine height: 1600 mm Machine length: 3750 mm Machine width: 2300 mm Machine weight: 3000 kg

Inv. Num. : 5833 Type: FKH 50 Producer: TOS Created: 1987, GO 2017 Parameters: Control system: Brázdil Operating hours: 500 h Maximum spindle speed: 1800 1/min X-axis travel: 940 mm Y-axis travel: 940 mm Z-axis travel: 470 mm Spindle power: 7.5 kW Tool holder: ISO 50 Accuracy: 0.02 mm Spindle extension: 120 mm Machine height: 3200 mm Machine length: 2800 mm Machine width: 2600 mm Equipment: Support plates Grips Complete overhaul carried out

Inv. Num. : 6982 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm

Inv. Num. : 6681 Type: SUS 63/5000 Producer: TOS Generated: Parameters: Maximum turning length: 5000 mm Maximum turning diameter over bed: 655 mm Maximum turning diameter over support: 390 mm Spindle diameter: 82 mm Equipment: Chuck Grasshopper Digital Measurement Knife Fixed bezel Movable bezel

Inv. Num. : 6528 Type: WH 80 Producer: TOS Created: 1966 Parameters: Spindle diameter: 80 mm Cone: Morse 5 Equipment: DRO Vice Dörne Console (1000 x 500) The machine is in good technical condition.

Inv. Num. : 7268 Type: WFN 180 HSQ Producer: TOS Created: 2001 Parameters: Control system: Heidenhain 430 m Shrek Operating hours: 110727 h Maximum spindle speed: 24000 1/min X-axis travel: 2500 mm Y-axis travel: 2000 mm Z-axis travel: 1240 mm

Inv. Num. : 7270 Type: WHN 13.8 CNC Producer: TOS Created: 1996 Parameters: Control system: Heidenhain 426 C Hours: 145790 h Maximum spindle speed: 1500 1/min X-axis travel: 3500 mm Y-axis travel: 2000 mm Z-axis travel: 1250 mm W-axis travel: 800 mm B-axis: 1600 x 1800 mm

Inv. Num. : 7325 Type: W 9 A Producer: TOS Created: 1983 Parameters: Work table length: 1000 mm Work table width: 1120 mm X-axis travel: 1250 mm Y-axis travel: 1000 mm Z-axis travel: 1400 mm

Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t

Inv. Num. : 7302 Type: SV 18 RA Producer: TOS Created: 1977, GO 2023 Parameters: Maximum turning length: 1250 mm Maximum turning diameter over bed: 380 mm Maximum turning diameter over support: 215 mm Maximum workpiece weight: 250 kg Equipment: Digital Measurement

Inv. Num. : 7266 Type: WH 13 Producer: TOS Created: 1972 Parameters: Work table length: 1800 mm Work table width: 1600 mm X-axis travel: 1250 mm Y-axis travel: 2200 mm Z-axis travel: 1700 mm Equipment: 4x extensions in the length of 4x1 m 8x tracks for 1000 mm extension Turntable New ball screws and bearings Tools & Equipment

Inv. Num. : 7273 Type: WH 10 NC Producer: TOS Generated:- Parameters: Work table length: 1120 mm Work table width: 1000 mm X-axis travel: 1000 mm Y-axis travel: 900 mm Z-axis travel: 630 mm

Inv. Num. : 6969 Type: FSQ-C 80 Producer: TOS Generated:- Parameters: Control system: Mefi CNC 859 Milling spindle speed: 11-2500 1/min Maximum table load (uniform): 2000 kg X-axis travel: 1100 mm Y-axis travel: 960 mm Z-axis travel: 1000 mm Power output: 30 kW Cone: ISO 50 Equipment: Roundtable

Inv. Num. : 6762 Type: WHN 9 B Producer: TOS Created: 1975 Parameters: Repair history: 30.8.2021: Repair of the rotary table 31.5.2021: Repair of the lubrication system for guide surfaces 18.02.2021: Adjustment of the rotary table coupling 22.10.2020: Replacement of the sealing elements of the hydraulic cylinder of the tool clamping Replacement of the tool support bearings Replacement of hydraulic hoses for tool clamping 21.10.2019: Replacement of the electromagnetic clutch 09.10.2019: Brush holder - carbon 31.1.2017: adapted quick-shift clutches with replaced spark plugs and shift knobs on the "Y" axle 11.03.2017: Lockshift clutch

Inv. Num. : 7037 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Duty cycle: 83171 h Hours: 36486 h Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm

Inv. Num. : 6079 Type: FSQ 80 CNC Producer: TOS Created: 1990 Parameters: Control system: NS 720 Work table length: 3000 mm Work table width: 800 mm Maximum table load (uniform): 1000 kg X-axis travel: 3000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm Total power requirement: 40 kW Spindle speed: 2500 1/min Machine height: 3400 mm Machine length: 7770 mm Machine width: 4360 mm Equipment: Tool Holder

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO

Inv. Num. : 6989 Type: WH 10 NC Producer: TOS Created: 1984 Parameters: Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Minimum spindle speed: 16 1/min Maximum spindle speed: 1250 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Cone: ISO 50

Inv. Num. : 6702 Type: WHN 9B Producer: TOS Created: 1975 Parameters: X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Equipment: DRO

Inv. Num. : 6710 Type: WH 80 Producer: TOS Created: 1964 Parameters: Working table length: 1090 mm Working table width: 1000 mm Maximum table load (uniform): 2500 kg Maximum spindle speed: 1400 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1250 mm Spindle diameter: 80 mm Machine height: 2550 mm Machine length: 5000 mm Machine width: 2500 mm Machine weight: 10850 kg Equipment: HE.

Inv. Num. : 6737 Type: WHN 11 Producer: TOS Created: 1970 Parameters: Working table length: 1250 mm Working table width: 1250 mm Maximum table load (uniform): 8000 kg Maximum spindle speed: 900 1/min X-axis travel: 1600 mm Y-axis travel: 1250 mm Z-axis travel: 1000 mm Spindle power: 34 kW Spindle diameter: 110 mm

Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Inv. Num. : 6345 Type: WHN 13.4.C Producer: TOS Produced: 1988 Parameters: Control system: MEFI CNC 836 Work table length: 2200 mm Work table width: 1800 mm Spindle drive power: 37 kW Maximum spindle speed: 2800 1/min Travel X-axis: 2000 mm Travel Y-axis: 1600 mm Travel Z-axis: 1200 mm Machine weight: 32.000 kg Replaced ball screw. Measurement of each ESSA axis separately. Drive for each XYZ axis.

Inv. Num: 5411 Type: SK 12 Producer: TOS Created: 1961 Parameters: Table diameter: 1200 mm Max turning diameter: 1300 mm Maximum workpiece weight: 4 t Max workpiece height: 1000 mm Weight: 18.3 t

Inv. Num. : 5549 Type: WH 10 NC Producer: TOS Generated: 1991, GO 2016 Parameters: Control system: Heidenhain Work table length: 1120 mm Work table width: 1000 mm Maximum spindle speed: 1250 1/min Travel X-axis: 1000 mm Travel Y-axis: 900 mm Travel Z-axis: 630 mm Spindle diameter: 100 mm Machine weight: 13400 kg Equipment: Clamping angle

Catalog No. : 6346 Type: WHN 13 A Producer: TOS Made in: 1980 Characteristic: Control system: MEFI CNC 859 Length of the working table: 1600 mm Width of the working table: 1800 mm Maximum rotary speed of the spindle: 2800 1/min X-Axis travels: 2000 mm Y-Axis travels: 1600 mm Z-Axis travels: 1200 mm Power of the spindle: 38 kW Machine weight: 34.600 kg Replaced ball screws. Measuring each IRC axis separately. Drives separately each XYZ axis.

Inv. Num. : 6305 Type: SKJ 20 Produzent: TOS Erzeugt: 1982 Parametern: Tischdurchmesser: 2000 mm Maximales Werkstückgewicht: 15000 kg Max. Werkstückhöhe: 1200 mm Maximale Tischdrehzahl: 170 1/min Gewicht: 35000 kg

Largest workpiece height: 630 mm Largest workpiece diameter: 800 mm Largest workpiece weight: 2000 kg Engine power: 40 kW Dimensions: 2600x2500x3700 mm Machine Weight: 10000 Kg Electrical table voltage Electrical rotation of the knife head Shaped copy via template Two-axis measurement Ball screw Suitable for CNC conversion Accessories: Clamping pressure gauges Tools

TOS SN 500S/1500 universal lathe was built by the Czechoslovakian factory TOS Trenčín. The conventional lathe is used for machining rotating parts such as a shaft or disc with a maximum length of 1500 mm, in single unit or small batch production. The machine’s rigid, stable design with a high-power main motor significantly increases production efficiency and allows full utilisation of the tools. The TOS SN500-S lathe for metal performs machining on workpieces with a maximum diameter of 500 mm (turning over bed), 270 mm (turning over support) or 700 mm (turning in bridge). Workpieces machined on the machine are characterised by excellent quality and precision. The total weight of the TOS SN 500 S 1500 lathe is 1895 kg. Technical parameters of the TOS SN 500S/1500 metal lathe - maximum turning length: 1500 mm - turning diameter in the bridge: 700 mm - turning diameter above th ...

Machine Type: Tool Milling Machine Manufacturer: TOS Model: FNGJ 32 Machine No.: 0101896 Year of construction: 1990 Condition: very good Offer Type: Used Machine Specifications: Table: 795 x 400 mm Speed range: 40 – 2000 rpm. Spindle mount: SK40 Travel range: x = 600 mm y = 400 mm z = 400 mm Propulsion: 3.0 kW Remark: Heidenhain VRZ 650 3-axis digital display, coolant device, 5 tool holders SK 40 Weight: 2100 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Vertical Lathe Double Column TOS SK16 Maxi turning diameter: 1700 mm Turning height: 1250 mm Rotation: from 3,55 to 150 RPM 4-jaws chuck Ø 1620 mm Chuck crossing diameter: Ø 1620 mm Max workpiece weight: 5000 kg Left vertical slide rame stroke: 900 mm Right Vertical slide ram stroke: 600 mm (turret 5 tools) Right Horizontal slide ram stroke: 500 mm Power: 12 kW Voltage: 380 V Length: 4600 mm Width: 2800 mm (without chuck protectors) Total height in low position: 3800 mm Weight: approx 20 T

Plano Milling machine Model: HD12 B Manufacturer: TOS Holoubkov Year of manufacture: 1971 Condition: Good Machine is able of milling Technical details: Table height: 1000x4000mm Distance between columns: 1250mm Max workpiece height: about 1250mm

TOS W100 Horizontal Boring Mill DRO Spindle 100 mm Spindle speeds 7.1-1120 rpm X/Y/Z/W Axis- 1600/1120/1250/900 mm Table size 1250x1250 mm Max table load 3 ton Table type rotary Facing chuck diameter 600 mm Slide travel 210 mm Max facing diameter 900 mm Facing chuck speed range 7.1 - 224 rpm Total power 15 kW Dimension 6020x3000x3500 Weight 14000 kg Remarks: faceplate is available, under a fixture

1 detailed with set stock for SN 63

Fixed bezel with roles Quill Used 400 mm forward

Cylindrical grinding machine BU 28/630 with accessories

Surface grinder BPH 320A/1000

Centerless grinding machine BB 6

Cylindrical grinder 2Ud/700 with accessories.

Cylindrical grinder BU 28/1000 with accessories

3 x heads , change gears

Gear hobbing machine OFE 22, with accessories

machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor

W100A Parameters 100mm, 1600mm Diameter of working spindle 100 mm Taper in spindle morse 6. Longitudinal adjustment of table (z) 1450 mm Cross adjustment of table (x) 1600 mm Motion of work head on frame (y) 1120 mm Slip out of working spindle (w) 900 mm Clamping area of table 1250 x 1250 mm Dimensions l x w x h 6710 x 3450 x 3000 mm Machine weight 14 000 kg Accessories: face plate, tail stock

Control system Heidenhain TNC 415 Spindle diameter 130 mm Tapered hollow spindle ISO 50 Spindle speed range 10 to 1500 rpm Table transverse (X): 3500 mm Rolling headstock stand for (Y): 2000 mm Longitudinal displacement rack (W): 1250 mm Eject working spindle (Z): 800 mm Table load 12 000 kg Machine weight: 36 000 kg

1x used CNC table boring mill manufacturer: TOS VANSDORF TYPE: WHQ 13.8 CNC Year of construction: 2000 Control: TNC 430 Heidenhain Tool changer: yes 40 places Chip conveyor: yes Spindle hours : 30000h Controlled axes: 5 x-axis:3500mm Y-axis:2500mm Z-axis:1250mm W-axis: 800mm B-axis:360° Table clamping surface : 1800x2200mm Load capacity table: 12000kg Spindle mount: 130mm ISO 50 Spindle rotation: 2500rpm