used TOYODA for sale

Spindle speed (max.): 15,000 revolutions per minute Spindle speed (min.): 50 revolutions per minute Rapid traverse X-axis: 60 mm/min Rapid traverse Y-axis: 60 mm/min Rapid traverse Z-axis: 60 mm/min Weight: 16,000 kg Equipment: Documentation/Manual Subject to technical error and prior sale

BRAND: TOYODA YEAR: 2014 MODEL: FH400J PRODUCTION HOURS: 36057 APPLICATION TYPE: MILLING LOCATION: SLOVENIA MACHINE TYPE: MACHINING CENTERS (HORIZONTAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2100 MM MEASUREMENTS DEPTH: 4205 MM MEASUREMENTS HEIGHT: 2735 MM MACHINE WEIGHT: 11000 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 32I-MODEL A MAIN DRIVE SPINDLE SPEED RANGE: 15000 1/MIN MOVEMENT X-AXIS MOVEMENT: 600 MM Y-AXIS MOVEMENT: 560 MM Z-AXIS MOVEMENT: 630 MM WORKPIECE WORKPIECE WEIGHT: 400 KG TABLE OUTER LENGTH: 400 MM OUTER WIDTH: 400 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 75 BAR HIGH PRESSURE PUMP AND A KNOLL 1. 200L EMULSION TANK. - TOOL-TO-TOOL CYCLE TIME OF 0. 9 SECONDS, AND A RAPID FEEDRATE OF 60 M/MIN.

BRAND: TOYODA YEAR: 2002 MODEL: FH63S APPLICATION TYPE: MILLING LOCATION: ITALY MACHINE TYPE: MACHINING CENTERS (HORIZONTAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES 16I-M MAIN DRIVE SPINDLE SPEED RANGE: 15000 1/MIN SPINDLE MOTOR POWER: 30/25 KW TOOL TAPER: BT 50 MOVEMENT X-AXIS MOVEMENT: 1000 MM Y-AXIS MOVEMENT: 850 MM Z-AXIS MOVEMENT: 750 MM TABLE OUTER LENGTH: 630 X MM TOOLS SLOTS IN STORAGE: 230 TYPE OF TOOL HOLDER: MATRIX A Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TOWER” TYPE PALLET CHANGER ON 3 LEVELS, 15 POSITIONS - ELECTRONIC SPEED RANGE CHANGER AND BEARING CHARGE CHANGER - THROUGH SPINDLE COOLANT - HIGH PRESSURE 70 BAR - KNOLL FILTRATION PLANT WITH COOLING UNIT - SHOWER CLEANING - TOOL BREAK CONTROL - RENISHAW PROBE - TABLE 1° - CONVEYOR QUALITATI ...

travel -x axis: 1.000 mm travel -y axis: 850 mm travel -z axis: 750 mm spindle turning speed range: 35 - 6.000 U/min numbers of positions in the tool changer: 60 table dimension - longitudinal: 630 x 630 mm control: FANUC16i, Milling machining centers - horizontal | TOYODA - FH63S equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000  0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630 | FH63 | FH-63 | FH 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindle speeds: 6.000 U/min tool taper: BT50 numbers of positions in the tool changer: 121 control: FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000  0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

This TOYODA FH63S Horizontal Machining center was manufactured in the year 2002. It is equipped with a Fanuc Series 16i-M control unit. The machine has a spindle speed of 15000 rpm.

Description: 2 Ton lifting capacity fork length 900 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,900 x 2,500 mm, weight approx.: 2,000 kg

Type: FV 1165 Parameters: 1100 mm, 650 mm Manufacturer: Toyoda Year of production / SO / GO: 2010 / - / - Description: The machine is in good technical condition. X-axis feed: 1100 mm Y-axis feed: 650mm Z-axis feed: 600 mm Max. speed: 8000 rpm Number of tools in the magazine: 40 Work table dimensions: 1300 x 650 mm Upon agreement, the possibility of a tour in progress.

Pallet length: 450 mm Pallet width: 450 mm Longitudinal X: 600 mm Cross Y: 600 mm Vertical Z: 600 mm Number of pallets: 0   Positions ATC: 60   CNC Brand: Fanuc CNC Model: FANUC 18i-MB X - Travel:               600mm Y - Travel:               600mm Z - Travel:               600mm B-Axis indexing:          360.000° Table Length:             450mm Table Width:              450mm Table load:               400 Number of pallets:        2 Feed rate X-Axis:         50000mm/min. Feed rate Y-Axis:         50000mm/min. Feed rate Z-Axis:         ...

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18 i MB MACH-id   4105 MAKE       TOYODA WELE TYPE         AA 1680 / FV 1680 YEAR        2012 SPECIFICATIONS X - Travel      1600 mm Y - Travel        800 mm Z - Travel         800 mm bed / plano / portal / moving column      VMC Controll     Fanuc 18 i MB Table Length x Width       1750 x 800 mm Table load in kG        2000 Kg Spindle Taper     Bt 50 kW power on spindle   15 kW Spindle speeds / ranges    12000 Rpm ATC tool changer      48 ...

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc WELE - TOYODA AA1680 VMC X 1600 x Y 800 x Z 800 mm MACH - ID 6271 Make: WELE Type: TOYODA AA1680 Control: FANUC 18i-MB YOP: 2012 Hours: 3953 X – Travel    1.600 mm Y – Travel       800 mm Z – Travel       800 mm Table Length       1.750 mm Table Width     800 mm Table load         2.000 kg Spindle Taper     40 ISO/Bt/Mk Power on spindle      15 kW Speeds / ranges       12.000 Rpm ATC / revolver        48 Coolant true spindle / Bar        25 Number of controlled ax ...

Pallet length: 450 mm Pallet width: 450 mm Longitudinal X: 600 mm Cross Y: 600 mm Vertical Z: 600 mm Number of pallets: 0   Positions ATC: 60   CNC Brand: Fanuc CNC Model: FANUC 18i-MB X - Travel:               600mm Y - Travel:               600mm Z - Travel:               600mm B-Axis indexing:          360.000° Table Length:             450mm Table Width:              450mm Table load:               400 Number of pallets:        2 Feed rate X-Axis:         50000mm/min. Feed rate Y-Axis:         50000mm/min. Feed rate Z-Axis:         ...