Model
(Manufacturer: TRUMPF)
Inv. Num. : 7530 Type: TruLaser 2030 Producer: Trumpf Created: 2018 Parameters: Duty cycle: 7313 h Hours: 4727 h Laser power: 2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum table load (uniform): 900 kg Source: TruDisk 2001 Machine height: 2300 mm Machine length: 8276 mm Machine width: 6764 mm Machine weight: 7750 kg
Inv. Num. : 6193 Type: CO 3030 L20 Producer: TRUMPF Created: 2010 Parameters: Control system: Siemens Laser ON: 70501 Beam ON: 27564 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminum): 25 mm Equipment: ROTOLAS According to GO. Availability 2Q/2023.
Inv. Num. : 7033 Type: Trumatic 2020 R FMC Producer: Trumpf Created: 2007 Parameters: Compressive force: 18 t Maximum length of sheet plate: 2070 mm Maximum blade width: 1280 mm Max. sheet thickness: 6.4 mm Maximum punching speed: 60 1/min Punching diameter: 76 mm Machine height: 2080 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg
Inv. Num. : 6118 Type: Liftmaster L3030 Producer: TRUMPF Created: 2002 Parameters: In good technical condition.
Inv. Num. : 7034 Type: TruLaser 3030 Producer: Trumpf Created: 2007 Parameters: Laser ON: 45047 Beam ON: 18268 Laser power: 4 kW Work table length: 3000 mm Work table width: 1500 mm Maximum table load (uniform): 900 kg Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminum): 10 mm Machine height: 2200 mm Machine length: 9300 mm Machine width: 4700 mm Machine weight: 10400 kg
Inv. Num. : 6414 Type: TruBend 3100 Producer: Trumpf Created: 2016 Parameters: Control System: T3500T Compressive force: 100 t Maximum bending length: 3060 mm Stroke: 350 mm Machine weight: 8300 kg Equipment: Rear track gauge - 2 axles Tool clamping: manual - lower tool. Trumpf Quick Clamp (upper tool clamping) Crowning: Combined CNC-controlled and self-adjusting crowning system
Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface
Inv. Num. : 6612 Type: Trumatic 500 Producer: Trumpf Created: 1955 Parameters: Operating hours: 69739 h Compressive force: 220 kN Maximum length of the sheet plate: 2500 mm Maximum blade width: 1250 mm Machine weight: 11050 kg 4 cassettes for a single tool and a cassette for a 6-way multitool
Inv. Num. : 6271 Type: Trumatic L4030 Producer: TRUMPF Generated: 2000 Parameters: Control system: Siemens Sinumerik 840 Laser ON: 89383 BEAM ON: 45361 Laser power: 4 kW Work table length: 4000 mm Work table width: 2000 mm Equipment: 2 x Head
Control system: TRUMPF Power on: 35071 h Cutting time: 14638 h Laser power: 3 kW Table dimensions: 3000 x 1500 mm Travel distances: X: 3000 mm Y: 1500 mm Z: 115 mm Max. Thickness of material Mild steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Machine dimensions: 9300 x 4600 x 2200 mm Machine weight: 12000 kg
Precision laser cutting machine Trumpf TRUMATIC L 3030 with TRUMPF laser TLF 2600turbo, CNC path control TRUMAGRAPH CC220S, electrical equipment for three-phase 400 V / 50 Hz, Also equipped with: TRUMP HI-LAS High Pressure Cutting Autofocus function AUTO-LAS Sheet Metal Layer Detection Cat-Eye Oil Spraying Device Additional. Laser cutting head for Quick Switch with 7.5-inch lens Lens tube for 7.5" VA applications Workspace lighting Expansion of part program memory from 448 kB to 1.0 MB Pipe cutting device RotoLas II First support - base support with sliding device Programming ToPs 100 / 400 Regularly maintained, very good condition, is still in operation
- Trumpf DA65 control - Year of construction 2000 Specification - Pressing force: 2300 kN - Bending length: 3060 mm - Installation height: 535 mm - Inclination: ± 10 mm - Free column passage: 2690 mm - Projection: 410 mm - Working height with lower tool 100 mm: 1050 mm - Table width: 200 mm - X-axis travel: 600 mm - Max. stop range X-axis: 860 mm - R-axis travel: 250 mm - Z-axis travel: 2310 mm - Stroke: 365 mm - Rapid traverse: 200 mm/s - Operating rate: 1 - 10 mm/s - Retraction: 135 mm/s - Hydraulic oil volume: 400 l - Electrical: 37 kVA - Pneumatic: 6 (±1) bar - Dimensions WxHxD: 3660 x 3095 x 2310 mm - Weight: 18210 kg
Trumpf Trumatic L3050 + Liftmaster LMZ3050 CO2 Laser Cutting Machine + Loading & Unloading System - Trumpf Liftmaster LMZ3050 automatic loading and unloading system - Siemens Sinumerik 840 control system - Trumpf TLF 5000TM Laser - Laser power 5 kW - Table size 3000 x 2000 mm - Interchangeable table - Automatic nozzle cleaning - Year of construction 2004
Trumpf TruLaser 5030 + Liftmaster LMZ3050 - CO2 Laser Cutting Machine + Loading & Unloading System Laser power:6000 W Working area:3000 x 1500 mm - Trumpf Liftmaster LMZ3050 automatic loading and unloading system - Siemens Sinumerik 840 control system - Trumpf TruFlow 6000 laser source - Laser power 6 kW - Table size 3000 x 1500 mm - Interchangeable table - Hinge belt conveyor - Operating hours beam: approx. 31000 h - Laser operating hours: approx. 57000 h - Year of construction 2013
Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price
TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...
TRUMPF TRUMATIC L3030 laser cutting machine manufactured in 2005 in Germany, provides efficient laser cutting while maintaining low operating costs. To machine workpieces, the machine uses a stable 2 kW laser beam, which, guided by a mirror system, achieves extremely smooth and even edges over the entire cutting length. The head and mirrors are mounted on movable components. The TRUMPF laser cutting machine also boasts an extremely stable and rigid work table with a large surface area, which is additionally equipped with an integrated automatic pallet changing system. This solution allows for simultaneous loading and unloading of workpieces during the machining process, which significantly increases production efficiency and reduces machine downtime to a minimum. All this makes the TRUMATIC L3030 laser ideal for even the most demanding applications in any production facility. The tota ...
TRUMPF TruLaser 3030 laser cutting machine was built in 2009 in Germany. The machine designed for cutting workpieces made of steel or aluminium, is ideal for any production facility where precision and the quality of the manufactured parts are the highest priority. The workpieces are machined by an extremely powerful laser beam which, in combination with extensive equipment, allows for rapid cutting of thin sheets with a thickness of up to 1.5 mm. This ensures that the finished workpieces have perfectly smooth and even edges, regardless of the machined material. The offered equipment includes an easy-to-use SIEMENS SINUMERIK 840D CNC controller with 500 MB memory for NC programmes, a table with hydraulic pallet changer and three cutting heads. The TRUMPF TruLaser 3030 Basic Edition laser cutting machine weighs 10500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - max ...
TRUMPF TruLaser 3030 laser cutting machine built in Germany in 2007 provides excellent laser cutting quality while maintaining low operating costs. Designed for even the most demanding challenges, the machine machines workpieces with a maximum thickness of 12 mm with high precision and quality, making it suitable for any production facility. The stable 2 kW laser beam used during cutting produces very smooth and even edges along the entire length of the workpiece, regardless of the type of material. To further improve the workflow and reduce machine downtime to a minimum, the work table is equipped with an integrated automatic pallet changing system which allows workpieces to be loaded and unloaded simultaneously during the cutting process. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - laser power: 2 kW (2 ...
TRUMPF TruLaser 3030 laser manufactured in 2007 in Germany, is the best choice for any production facility. This reliable and highly efficient machine provides excellent laser cutting quality while maintaining low operating costs, thanks to the use of a reliable laser source with the highest energy efficiency. The stable 2 kW laser beam makes the workpiece edges extremely smooth and even after machining. Machining is performed on a high-quality work table with an integrated automatic pallet changing system. This system allows simultaneous loading and unloading of workpieces during the cutting process, resulting in increased production efficiency and significantly reduced machine downtime. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical data of the TRUMPF TruLaser 3030 laser cutting machine - laser power: 2 kW (2000 W) - feed rate in the X/Y/Z axis: 3104/ ...
TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...
TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...
TRUMPF TruLaser 3030 FIBER laser cutting machine was manufactured in 2014 in Germany. The machine uses state-of-the-art fibre cutting technology for the precise machining of structural steel, stainless steel, aluminium and copper sheets, which guarantees smooth and even edges without any splintering. Thanks to the DetectLine package, which automatically measures the cut crest of the focal point and precisely determines the position of the focal point and the position of the sheet, it is also possible to perform very accurate additional processing of previously cut parts. The TruLaser 3030 FIBER (L49) laser cutting machine is equipped with the reliable TRUMPF TruDisk 3001 disk laser with a power of 3000 W. The energy-saving pulse function and intelligent power management generate a high-quality beam with simultaneously low operating costs and reduced power requirements. Cutting of work ...
TRUMPF TruLaser 3030 laser cutting machine was manufactured in 2011. The machine is equipped with modern components to provide precise cutting of workpieces made of mild steel, stainless steel and aluminium. High stability during processing is ensured by the steel body on which a state-of-the-art SIEMENS SINUMERIK 840D CNC controller is mounted for programming operating modes and control of the cutting process. The TruLaser 3030 Basic Edition laser cutting machine cuts metal sheets with a maximum weight of 900 kg and a thickness of 20 mm (mild steel), 12 mm (stainless steel) and 8 mm (aluminium) using a 3.2 kW laser beam, guaranteeing high precision and smooth and even workpiece edges. The laser is also equipped with an automatic pallet changing system. The total weight of the machine is 11500 kg. Technical data of the TRUMPF TruLaser 3030 laser cutting machine - CNC control: SIEM ...
MASCHINENTYP : TruLaser 5030 Fiber (L41) HERSTELLER : Trumpf BAUJAHR : 2010 BETRIEBSSTUNDEN : NC:57796h Laser Ein: 37360h ARBEITSBEREICH : 3000 x 1500 x 115mm LASERLEISTUNG : 3000W STEUERUNG : Siemens Sinumerik 840D SL STANDARTAUSTATTUNG : • Geschlossener Maschinenrahmen mit integriertem Laseraggregat • Torque Antrieb in Kombination mit Linear Direktantrieben • Geschlossene Strahlführung per Lichtleiterkabel (LLK) • Maschinenkühlaggregat • Integrierte Schaltschränke mit Innenbeleuchtung • Automatischer Palettenwechseler in Längsrichtung • Breites Längsförderband • Arbeitsraumbeleuchtung • Positionslaserdiode • Sprüheinrichtung • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatische Düsenreinigung TRUMPF Laser : • Festkörperlaser TruDisk 3001 mit ei ...
MACHINE WAS ORDERED BARND NEW FROM THE 1. ST OWNER MACHINE IS STILL ON POWER WORKING DAYLY ORDERS LASER POWER : 2000 W MAX SHEET THICKNESS: 4 mm MAX PUNCHING FORCE: 165 kN ATTACHED VIDEO FOR CUSTOMER WE CAN ORGANIZE DISMANTLING, TRANSPORT
WE ARE SELLING AN NICE CONDITION TRUMPF ROTATION. MACHINE IS READY FOR USE. MACHINE INCLUDES ALSO TOOL GRINDER AND EXISTING TOOLS FOR CUSTOMER WE ORGANIZE TRANSPORT AND DISMANTLING AS WELL
Trumpf TRUBEND 5085 - WORKING INSIDE PRODUCTION WORKING HORS: PRESENT ON PHOTO OF SCREEN Year 2011 Compression force: 85 tonnes Table length: 2,200 mm Free travel speed: 220 mm/s Accessories: Increased lift height from 230 mm to 615 mm. 5-axis bending. Hydraulic tool clamping at the bottom. Hydraulic tool clamping at top. Automatic bombing. Bendguard guard ACB angle measurement FOR CLIENT WE ORGANIZE AS WELL DISMANTLING AND TRANSPORT
MACHINE IS GREAT WORKING CONDITION . INCLUDING TOOLINGS WEIGHT: 4300 KG YEAR: 1991
Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg
Press brake TRUMPF TrumaBend V 230 Year of construction: 2003 Working width: 3,000 mm Pressure: 230 To Stroke: 365 mm Operating pressure: 305 bar Delay time: 95 ms Safety distance: 190 mm Weight: 18.210 kg Voltage: 3 x 400 V Nominal current: 68 A Frequency: 50 HZ Connected load: 27.2 KVA Compressed air: 6 BAR Stop: 2 x X, 2 x Z, 2 x R – Axis, 2 x Y 1x sliding matrix
Extra Accessories: SheetMaster Sheet Metal Supplier The machine is also working at the moment Make: Trumpf Type: Trumatic 6000L Year of construction: 2006 Hours: 90,119 Travel – x – 3085 mm Travel – y – 1550 mm Travel – x (combined) – 2500 mm Cutting capacity for mild steel – 8 mm Cutting capacity for stainless steel – 6 mm Cutting capacity for aluminium – 4 mm Workpiece – 230kg Punching force - 180 KN Punching speed – 917 1/min Watt laser power: 2700 Dimensions (LxWxH): 8400x8500x2200 mm
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 82500 Hours (03.2024) Here is the configration : TruMatic TC6000-1600 FMC Year of construction 2005 Working area: 2585 x 1650 mm Standard equipment: - Stable C-frame - Coordinate guidance with integrated linear magazine, 21 slots for tools and clamping claws. - 3 clamping claws - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for resetting - Sensor-monitored parts chute 500x500 mm for punching and laser station, ejection cylinder on laser chute - 2 boxes of good parts - Laser unit: High-frequency excited CO2 laser TLF 2000, vibration-isolated in the machine frame, incl. cooling unit and laser control DIAS 3 - HI-LAS high-pressure cutting - ContourLas for making small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quic ...
TRUMPF TRULASER 5030 (6kW) CO2 laser cutting machine. Year 2008. With LoadMaster loader. In operation – Laser power: 6000 W. – Work area (X x Y x Z): 3,000 x 1,500 x 115 mm. – Maximum piece weight: 1,100 kg- Speed pos. Simultaneous: 300 X+Y m/min – Maximum steel thickness: 25 mm – Maximum stainless steel thickness: 25 mm – Maximum aluminum thickness: 15 mm – Controller: SIEMENS SINUMERIK 840D – Machine hours ON: 34,348 h – Lightning hours ON: 17,422 – Accuracy: +/- 0.1mm Dimensions L/W/H: 9,300/4,600/2,200mm Precision, simplicity and high-performance production.
Nibbling machine trump, unloading 1000 mm, copying device, cutting, nibbling, slits, gills, beading, etc.
Manufacturer: Trumpf Type: TruDisk 5001(6C) Year of construction: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: 4 mm mrad Location: Dresden Optionally, the laser optics PFO 33-2 R1030-1070 HA as well as other accessories are available from us!
Manufacturer / Manufacturer: Trumpf Typ / Type: Trumatic 500 Rotation Stocknummer / stock number: 1008 Year of Manufacture: 1995 Punching force: 22 tons Max. sheet thickness: 8 mm Connected load: 19 kVA Machine weight: 13,8 tons
Trumpf, Trumatic TC L3030, control Siemens, with pallet changer, incl. loading station, Sheet thickness : Steel: 20mm, Alu 8mm, VA 12mm,
Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
Specifications: - Flexible shaft 1500 mm - infinitely variable speeds 1000 to 12000 rpm - Drive 380 V - mobile underframe - Space requirement approx. W 750 x H 1400 x D 500 mm - Weight approx. 50 kg
Shaft grinding machine with belt grinding attachment Specifications: - Flexible shaft 1500 mm - 5 speeds - Belt grinding attachment - Drive 380 V - mobile underframe - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg
Welding edge shaper Offer number: 20122 Make: TRUMPF Type: TKF 104 - 0 Machine Number: 4522206 Built: ca.2006 Technical data: min. / max. material thickness 3 - 25.0 mm Bevel angle Standard 30 - 37.5 - 45 max. bevel length steel 400N/mm2 11 mm max. bevel length steel 600N/mm2 9 mm max. bevel length steel 800N/mm2 6 mm smallest inner radius 50 mm smallest pipe inner diameter 80 mm Working speeds 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg
Welding edge shaper Offer number: 20120 Make: TRUMPF Type: TKF 103 Machine Number: 454106 Built: ca.1992 Technical data: min. / max. material thickness 3 - 25.0 mm max. bevel length steel 400N/mm2 10 mm max. bevel length steel 600N/mm2 8 mm max. bevel length steel 800N/mm2 5 mm Working speed approx. 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg
For sale is a laser cutting machine TruLaser 3530. technical data: Additional details - Operating hours: Beam-On 2030 h/Laser-On 9814 h - X travel distance 3000 mm (max. 3104) - Y travel distance 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel distance 114 mm - maximum material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - maximum positioning speed axle parallel 120 m/min - Simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y axis 15 m/sec. Standard - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet changer - Closed beam guide - NitroLine, high-pressure cutting - FocusLine, constant focus position - Comp ...
Laser cutting machine Trumatic L3030 Manufacturer: trump BJ: 2005 Max workpiece length ... 3000mm Max. workpiece thickness ... 1500mm Max sheet thickness ... 12mm Laser power ... 2000w Total power demand ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.
X-Axis : 2500 mm Y-Axis : 1250 mm Max. Billet Weight: 150 kg Multitool Tool Replacement Time: 2.4 s Part Size for the Cover for Removing Items at Cutting Down: 180 mm x 150 mm Part Size for Fixed Cutting Tray (with Movable Table): 460 mm x 500 mm Average Power Consumption with Active Shutdown Automation: 0.3 kW Average Power Consumption During Production: 4.3 kW
Trumpf Lasercell 7040 laser cutting machine / 5-axis, Year of construction 2008, Control Siemens 840 D, Laser power 6 KW, Table length 4000 mm Table width 1500 mm Burner Heads 1 max. cutting capacity sheet metal 20 mm, max. cutting capacity VA 20 mm, max. cutting capacity AL 15 mm, Enclosed engine room Laser TruFlow 6000 Htzhtpszv ADC Cutting Head Positioning Laser Diode Suspended control panel stationary, rotatable Teachpanel Magnetic coupling, head detection Laser Power Control Performance Cycles Laser welding Total power requirement kW Speed 10 m/min Machine weight approx. 19 t Space requirement approx. 9.5 x 7.3 x 3.1 m
Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...