used VOGEL for sale

Bird central lubrication for presses for fluid grease . Bearing and shaft supply . Supply with 230 VAC . Automatic lubrication unit was used as a replacement at the bearing. Appendix on function Tested , but without warranty / warranty New Unbuilt .

Feed gearbox VOGEL Spare parts for planing machines from a skilled person

Three-phase electric motor for Vogel central lubrication VOGEL ATB 143-012-255 230 / 400 V Motor: 0.09 kW 1350 rpm IP 54 New ! Dimensions: 240 x 100 x 150 mm

Pressure switch VOGEL DS-W 12 Switching pressure: 12 bar Switching contact: max. 250 V AC 0.3 A spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 130 x 110 x 45 mm

Submersible pump VOGEL PMS5B-200+185 Immersion depth: 200 mm Base: Ø 100 mm Flange: Ø 130 mm Q max: 57 l/min H max: 5,, 9 m Motor: 0.12 kW 290 / 500 V New ! dimension. 350 x 160 x 130 mm

Relief valve, with bleed and pressure relief valve SKF, VOGEL 202-175-30 Connection type: internal thread G1/4 ( inch ) New ! Dimensions: 85 x 60 x 50 mm

Solenoid valve, distributor valve VOGEL DBEF 64 48 V AC 16 VA 24 V DC 11.5 W New ! Dimensions: 115 x 55 x 110 mm

Central lubrication, single-line pump, lubrication pump VOGEL 122 045 109 Successor: SKF MKU2-BW3-22003 Q: 0,0,1 l/min p: 15 bar engine: 0.15 kW 110 / 220 V 1AC 50 / 60 Hz Fuel tank capacity 2.7 l used, tested ! Dimensions: 270 x 130 x 300 mm

Lubrication pump with tank VOGEL 143-011-151 143-012-250 Q: 2,5 l/min Pmax: 50 bar engine: DB63G4180-10 0,18 kW 230 / 400V tank approx. 35 l used, tested ! Dimensions: 620 x 430 x 550 mm

Emulsion pump, coolant pump, submersible pump, cooling water pump VOGEL PV 100-210 A 1 40 Immersion depth: 210 mm Pump base: 100mm pump flange: 130 mm motor: 2,, 2 KW 240 / 400 V IP 54 connection inside 3/4 inch Dimension 550 x 190 x 260 mm

Piston distributor, 2 pieces, mounted VOGEL, SKF R 353.551 ( R353.551 ) piston distributor 353 2x 3 outputs spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions ( one distributor ): 85 x 63 x 20 mm Dimensions ( whole unit ): 180 x 85 x 20 mm

Piston distributor VOGEL, SKF R 355.551 ( R355.551 ) Piston distributor 355 5 outputs New ! Dimensions: 98 x 82 x 18 mm

Central lubrication, lubrication pump VOGEL MFE5 Q: 0.5 l/min pmax: 20 bar Engine: Type DM7 180 - 220 / 315 - 380 V 0.07 kW Fuel tank capacity 2.7 l used, tested ! Dimensions: 250 x 130 x 320 mm

Solenoid valve, distributor valve VOGEL DBEF 83/4 48 V AC 24 V DC New ! Dimensions: 200 x 50 x 110 mm

Central lubrication, lubrication pump VOGEL MFE5 MFE5 / B3 / S3 Q: 0,5 l/min pmax: 28 bar pressure switch: DS-W12 motor: Type 3 DM7 0.07 kW 2700 rpm 180 - 220 / 315 - 380 V 3AC 50 Hz tank capacity: 2.7 l spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 270 x 130 x 330 mm

Planetary gears, servo planetary gears VOGEL MPR 01 ( MPR01 ) 416753 i = 3,0 shaft Drive: Ø 22 mm shaft Output: Ø 19 mm flange Drive: 92 x 89 mm flange output: 130 x 130 mm New Dimensions:135 x 130 x 160 mm

Lubrication pump INTERLIT JOISTGEN GmbH, VOGEL ITP1250 Pump: PVS 1200 Q: 38 l/min H: 500 m Engine: 5,5,5 kW 2920 rpm 400 V 3AC 50 Hz IP44 Flange diameter: Ø 140 / 180 mm bolt circle diameter: Ø160 mm 4x bore: Ø 11 mm used, tested ! Dimensions: 895 x 260 x 330 mm

Hydraulic pump with motor VOGEL PVST1170-6/A1 Q = 31 l/min p = 70 bar Motor: 7.5 KW 2910 rpm 400 V Dimensions 900 x 350 x 330 mm

Pressure switch VOGEL DS - W 8 - 2 - s 9 Dimensions: 135 x 80 x 45 mm

Immersion Pump VOGEL, SPANDAU PUMPEN PMS 9A Immersion depth: 445 mm Base: Ø 140 mm Flange: Ø 180 mm Q max: 228 l/min at H 1,0 m engine: 0.78 kW 200 - 240 / 345 - 420 V used, tested ! dimension. 700 x 220 x 180 mm

Central lubrication, lubrication pump VOGEL 149-012-023+140 Q: 2x 2,5 l/min pmax: 10 bar pump: 143-012-403 engine: AEG Type AM 71Z BA4 0,07 kW 2700 rpm 230 / 400 V 3AC 50 Hz 60 Hz - operation is possible ! tank capacity: approx. 40 l spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC7 ! used, tested ! Dimensions: 670 x 450 x 610 mm

Submersible pump, coolant pump, emulsion pump, cooling water pump VOGEL PRT 5C 220 Immersion depth: 220 mm Pump base: 100 mm pump flange: 130 mm Q = 36 l/min at H = 1 m Q = 10l/min at H = 4 m Engine: 0,11 KW 240 / 400 V IP54 new ! Dimensions: 420 x 230 x 140 mm

single-line pump, central lubrication, lubrication pump VOGEL MKU2-KW3-22013+428 Q: 0,2 l/min p: 30 bar engine: 0.105 kW 2700 rpm 230 V 1AC 50 / 60 Hz tank capacity: 2.7 l used, tested ! Dimensions: 300 x 140 x 300 mm

Piston manifold, single-line manifold, pre-lubrication manifold VOGEL, SKF 3x Series 355 R 355.551 ( R355.551 ), 5 outputs 1x Series 352 R 352.551 ( R352.551 ), 2 outputs Dosage: 0.2 cm3 Connection: M8 x 1.0 Other quantities on request ! New ! Dimensions ( R355 ): 97 x 80 x 20 mm Dimensions ( R352 ): 46 x 80 x 20 mm

Piston manifold, single-line manifold, pre-lubrication manifold VOGEL, SKF 1x Series 345 R 345.551 ( R345.551 ), 5 outputs 2x series 342 R 342.551 ( R342.551 ), 2 outputs Dosage: 0.2 cm3 Connection: M8 x 1.0 Other quantities on request ! New ! Dimensions ( R345 ): 100 x 52 x 16 mm Dimensions ( R342 ): 48 x 52 x 16 mm

Central lubrication, lubrication pump VOGEL MFE5 MFE5-KW3-2+299 Q: 0,5 l/min pmax: 20 bar Level switch: WS32-2 Motor: Type DM7 0.07 kW 2700 rpm 207 - 254 / 360 - 440 V 3AC 50 Hz Fuel tank capacity 2,7 l used, tested ! Dimensions: 260 x 130 x 290 mm

Central lubrication, lubrication pump VOGEL MFE5 MFE5-KW3-2+299 Q: 0,5 l/min pmax: 28 bar level switch: WS32-2 engine: Type DU56N2075+299 0,075 kW 2700 rpm 207 - 254 / 360 - 440 V 3AC 50 Hz fuel tank capacity 2,7 l used, tested ! Dimensions: 270 x 130 x 300 mm

Lubrication pump with tank VOGEL PMS 5 A Q 57 l/min P 0.1 bar 220 / 400V motor: 0.12 kW Dimensions: 400 x 200 x 375 mm

Replacement pump VOGEL KPM 27 bar at 2700 rpm Dimensions: 72 x 49 x 49 mm

Replacement pump, tooth pump VOGEL 12 bar at 2700 rpm Dimensions: 67 x 49 x 49 mm

Lubrication pump VOGEL Ref : 143-012-200 Motor : 0,37 kW 220 / 380 V IP 55 Dimensions: 350 x 180 x 140 mm

Central lubrication, lubrication pump VOGEL MFE 5 / BW3 Tank capacity 2.7 l Engine: 70 W 220 / 380 V used, tested ! Dimensions: 230 x 130 x 320 mm

Submersible pump with tank VOGEL / GRAMMINGER PRT 5 B 15 U 2 PRT5H-220+806 Tank approx. 5 l Q max: 52 l/min H max: 5,5,5 m Motor: 0.12 kW 277 / 480 V 60Hz dimension. 350 x 325 x 450 mm

Central lubrication, lubrication pump VOGEL MFE 5 / BW3 Tank capacity 2.7 l Engine: 70 W 220 / 380 V used, tested ! Dimensions: 230 x 130 x 320 mm

Lubrication pump VOGEL PVS 1130/A1 Q: 25 l/min Pmax: 30 bar Motor: 2.2 kW 230 / 400 V New ! Dimensions: 730 x 280 x 200 mm

lubrication pump without motor VOGEL PVS 1170-6 Q: 31 l/min (3490 rpm) Pmax: 70 bar for engine: 7.5 kW New ! Dimensions: 460 x 220 x 200 mm

Heavy duty castors, heavy duty wheels, tires, solid rubber tires -without: rubber coating -Payload: kg -Tire size: 350 x 155 mm -Mounting hole: 60 mm 2x with groove -Number: 4x bikes available -Price: per piece -Weight: 31 kg/piece

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump -Manufacturer: Vogel, OIL- central lubrication pump Oil discharge pump -Type: MFE 5 Content: 2.7 l -Flow rate: 0.5 l/min / 20 bar -Dimensions: 360/145/H370 mm -Weight: 7.4 kg

Gears, angular gears, spur gears, transmission gears, worm gears, angular gears for edge banders -Manufacturer: Vogel, angular gear type K 1 -Id. No: 200066 -Translation: i = 1.0 -Shaft: Ø 18 x 35 mm -Dimensions: 168/168/H90 mm -Weight: 5.2kg

Heavy duty castors, heavy duty wheels, tires, solid rubber tires -Payload: kg -Tire size: 400 x 145 mm -Mounting hole: 60 mm -Number: 3x bikes available -Price: per piece -Weight: 60 kg/piece

Heavy duty castors, heavy duty wheels, tires -Roll size: Ø 200 x 50 mm -Inside diameter: 20mm x 64mm -Price: per piece -Number: 2 pieces of wheels available -Weight: 4.5 kg/piece

Heavy duty castors, heavy duty wheels, tires -Roll size: Ø 124 x 45 mm -Interior diameter: 75mm x 50mm -Price: per piece -Number: 4 wheels available -Weight: 1 kg/piece

Heavy duty castors, heavy duty wheel, tires, heavy duty double swivel castors, heavy duty double fixed castors -Equipment: Ball bearing, VULKOLLAN -Wheel dimensions: 200 x 80 mm -Load capacity: approx. 2500 kg -Mounting plate: 310 x 345 mm -Overall height: 345 mm -Number: 7x wheels available -Price: per piece -Dimensions: 410/310/H345 mm -Weight: 91 kg/each

Single-line pump, for fluid grease, central lubrication, lubrication pump SKF MKF1-KW2-20001+428 Q: 0,0,1 l/min pmax: 30 bar engine: Shang Yi Motor 178-900-043+428 230 V 50 / 60 Hz 0.12 / 0.15 kW ( 120 / 150 W ) Without tank ! New, with documents ! Dimensions ( pump, upright ): 215 x 135 x 285 mm Dimensions ( packaging ): 380 x 310 x 140 mm

Pressure switch VOGEL DS-W 12-2 0000146267 Switching pressure: 12 bar Maximum pressure: 45 bar Switching capacity: max. 250 V AC 0.3 A New ! Dimensions: 110 x 90 x 42 mm

Valve strip, solenoid valve, distributor valve VOGEL 161 120 032 2x 161 120 019 4-311V-01-10 24 V DC spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! New ! Dimensions: 110 x 90 x 125 mm

Central lubrication, lubrication pump VOGEL MFE5 MFE5-BW7-S71+299 Q: 0,5 l/min pmax: 20 bar pump: MFE5+299 engine: type DM7 0.07 kW 2700 rpm 207 - 254 / 360 - 440 V 3AC 50 Hz 60 Hz - operation is possible tank capacity: 6.0 l spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! used, tested ! Dimensions: 270 x 130 x 300 mm