used WEILER for sale

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik SL 1 cycle control Year of construction: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation O above bed : 435 mm Circulation O over face slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 4-fold PARAT tool holder 20 PARAT tool holders 3 jaw chucks RÖHM Duro T 200 1 pc Rotating Lynette 0 160 mm Tailstock with extendable drill quill Coolant device Chip drip tray Operating instructions

Description WEILER flatbed lathe E70/2 Good general condition, geometry fine. Equipped with Forcardt lining, incl. lynettes. Details Machine No. 48° Year of construction 1995 Operating voltage 400 V Control voltage 24 / 230 V Connected load 28 kW Rated current 45 A Frequency 50 Hz NUM Control

Lead and pull spindle lathe WEILER CONDOR incl. new Digital -Original paint -Turning diameter over bed 330mm -Turning diameter over support 170mm -Turning length 800mm -Center height 160mm -Spindle bore 38mm -Spindle speeds 24-2800 rpm -Automatic longitudinal/plan feeds -Tailstock MK3 -Not/Off bcpc8wp9r2w -Total power requirement 3KW -Three-jaw chuck / Four-jaw chuck -Documentation -Multifix with insert Dimensions: LxWxH approx. 1.9x0.9x1.5 meters Weight 850Kg

HAMLET - E35 Control - CNC Center height: approx. 200mm Center width: approx. 950mm Max. circulation over bed: approx. 410mm Max. circulation over face cuts: approx. 200mm Max. circulation offset approx. 440mm Max. workpiece weight: approx. 900kg Speed range from approx. 1-3000 rpm Two speed gears Spindle head according to DIN: 55027 Spindle diameter: 90mm Spindle bore: 54mm Schunk/Rota lining: approx. 200mm Flat stroke: approx. 230mm Longitudinal stroke: approx. 950mm Multifix with inserts Chisel cross-section 25x25mm Tailstock quill taper: MK 4 D33lx09vs Coolant system Sliding door/feed guard Dimensions: LxWxH 2.3x1.4x1.7m Machine weight 2100 kg

Fully rebuilt by Weiler in 2018. Characteristics: Output: 2800 containers per hour Molds and tooling for 100ml IV bags/bottles (12 cavity, 12 parison) included Eurocap cap welding machine with cap elevator Including: - new fill system - new extruder drive - new parison head - hydraulic system overhaul

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

HAMLET COMMODOR incl. Three-axis digital display Turning length max. 1000mm Turning diameter max. 380mm Turning diameter over support 190mm Rod passage 56mm Speed range 25-2000 rpm Automatic longitudinal/face feeds Eeipidd Thread/Metric/Inch/etc Drive power 4 KW Tailstock MK4 Three-jaw chuck - Röhm 200mm Quick-change bracket incl. 3 inserts Bed stop Chip back wall Coolant system Feed protection 2 x EMERGENCY /OFF Machine Documentation Dimensions: LxWxH 2.7x1.5x1.8 meters Weight approx. 1.6 tons

Lead and drive screw lathe WEILER Condor incl. new digital display. - Original paint - Turning diameter over bed 330 mm - Turning diameter over support 170 mm - Turning length 800 mm - Center height 160 mm - Spindle bore 38 mm - Spindle speeds 24-2800 rpm - Automatic longitudinal/face feeds - Tailstock MK3 - Emergency/Off - Total power requirement 3 KW - Three-cheek butter / four-cheek lining -Documentation - Multifix with insert Bcpc8wp9r2w Dimensions: LxWxH: approx. 1.9x0.9x1.5 meters Weight: approx. 850 kg

Weiler automatic lathe UD 240CNC Bosch CC200T 270 mm length max Swing 190 mm Passage 24 mm rod Pneumatic clamping 8 tool slots Speed 5000 rpm Center height 130 mm P1 25563 hrs P2 1044266 h Power: 11.25 KW Rod magazine Collets Cheek chuck

Weiler automatic lathe UD 24 CNC Siemens 820T P1 65574 P2 28618 380 V 11,25 KW Without tailstock Hydraulic feed and clamping Accessories

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

WEILER DA 210 / 3-axis digital display Heidenhain Including CE marking - ORIGINAL CONDITION Center height 210mm Center width 1000mm Circumferential diameter over bed 435mm Circulation diameter via face slide 245mm Spindle bore 52mm Speed range 40-2000 rpm Automatic longitudinal / plan feeds Drive power 5.5 KW Cjr3wkhxxx Quick-release holder with 3 inserts Feed protection Work lamp 2x EMERGENCY/OFF Central lubrication Three-jaw chuck - 200mm Documentation Dimensions: LxWxH 2.3x1.2x1.6 meters weight 1400KG Errors / input errors excepted Chip back wall Coolant device

WEILER COMMODOR 230 AC / with CE marking / 3-axis digital display Gxadgeq -Built in 1999 -Tip height 230mm -Center width 1000mm - Turning diameter over bed 475mm -Circulation diameter via face slide 270mm -Rod passage 56mm -Speed range 25-2000rpm (infinitely variable via potentiometer) • Automatic longitudinal/plan feeds -Thread/Metric/Inch/Pitch/ -Tailstock MK4 -Quick-release bracket with insert -Coolant device -Chip back panel -Feed protection electric -Three-jaw chuck approx. 200mm -2xEMERGENCY/OFF -Documentation Dimensions: LxWxH 2.6x1.5x1.7 meters / Weight 1800Kg

Beautiful hamlet intern 160. Centre distance 650 mm Center height 160 mm Turning diameter over bed 320 mm Spindle bore 40 mm Spindle speeds 24-2500 rpm Accessories: Digital display Heidenhain 3 axes 3-claw 160mm Multifix tool holder with 5 holders Collet Equipment Collets 27 pieces

BRAND: WEILER YEAR: 1988 MODEL: 160 CNC APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: WEILER MODEL: BOSCH CC 200 T MAIN DRIVE SPINDLE SPEED RANGE: 4000 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. SWING DIAMETER 280/140 MM - TURNING LENGTH 365 MM - SPINDLE-0 41 MM - TOOL HOLDER FRONT, MULTIFIX

CNC lathe Weiler Commodor B (Made in Germany) Lace lathe Manufacturer: Weiler Type: Commodor B Year of construction: 1997 El. Connected load: 4kW Weight: 1,500 kg WZ-Revolver: 4-fold WZ-Revolver Parat Trauwein RD2 Accessories: Div. 3-jaw chuck "Röhm Duro 200 KK6 UB" Various tool holders (without tools)

turning diameter over bed: 280 mm turning diameter over slide rest: 155 mm turning diameter in the gap: 350 mm turning length: 800 mm turning speeds: 26 - 2000 U/min spindle bore: 24 mm connected load: 1,6 kW weight of the machine ca.: 0,7 t dimensions: 1,55 x 0,8 x 1,3 m Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm spindle bore: 38 mm tailstock quill taper MT: 3 spindle turning speed - stepless: 24 - 2800 U/min linear traverse of table: 0,026 - 1,253 mm feeds crossrail-slide horizontal: 0,013 - 0,628 mm/U quill stroke: 120 mm total power requirement: 2,4 / 3,0 kW weight of the machine ca.: 850 kg dimensions of the machine ca.: 1,85 x 0,8 x 1,7 m 3-jaw chuck: Qick Toolholders: Machine Lamp: chip protection wall: Lining protection hood: Coolant System: The machine comes from a training company and was maintained more than needed. The general condition is very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 158 mm turning length: 650 mm turning speed range: 96 - 2500 U/min feeds - longitudinal: 0,02 - 0,63 mm/U feeds - cross: 0,32 x Längsvorschub mm/U 3-jaw-chuck diameter: max.165 mm total power requirement: ca. 2 kW 88140984 380 V - 50 Hz colour: green accessories: set of collets (59 units), multifix tool holder Size A with 6 inlets, 1 punch point - revolving, 2 punch points - fix, 1 boring chuck, 1 turning heart, 1 chuck for three jaws, 1 chuck for four jaws, 5 set of jaws. The machine was equipped afterwards with a 3-axis digital monitoring from RSF in our workshop. #The machine is in a condition as new# The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 260 mm turning diameter over slide rest: 140 mm turning length: 500 mm centre height: 125 mm bed width: 160 mm spindle turning speed range: 16: 110-3600 U/min spindle bore: 28 mm face slide travel: 120 mm upper slide-adjustment: 120 mm tailstock quill taper MT: 2 tailstock quill adjustment: 80 mm drive motor: 0,37 / 0,88 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,3 x 0,6 x 1,2 m Electric 380 Volt: chuck: 140 mm Collet device with collets: 24: 1-21 mm Boring chuck: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 185 mm turning length: 750 mm centre height: 165 mm spindle bore: 40 mm turning speed range: 32: 22 - 2800 U/min feed longitudinal: 120: 0,015-0,3 mm/min metric thread: 0,18 - 28 mm tailstock taper MT: 3 total power requirement: 1,5 / 3 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 1,8 x 0,9 x 1,4 m Condition: ready for operation: Electric 380 Volt: Rapid transfer steel-holder: Multifix B Applications for rapid transfer steel-holder: 4 3-axis digital readout: Heidenhain ND 780 Chip protection behind: Cooling equipment: Wedge bar chuck: Forkard 200 mm 4 jaw chuck Röhm : 200 mm Spindel cover: nachgerüstet Chuck protection: geschaltet Collet device: Collet devices: 40 Stück German quality brand - universal lathe in good condition with 2-stage motor and brake. Machine dealer with own stock of 2 ...

Control: Manufacture: WEILER turning dia. over bed: 330 mm centre height: 165 mm centre distance: 770 mm turning dia. over face-slide: 160 mm spindle bore: 42 mm spindle taper: 55027/5 spindle turning speed - stepless: 1-4500 U/min tailstock quill taper MT: 3 dia. of quill: 50 mm quill stroke: 110 mm feed - longitudinal/cross: 0.001-20 mm/min rapid traverse longitudinal: 10 m/min rapid traverse cross: 5 m/min spindle drive: 9/11 kW dimensions of the machine ca.: 1800x1200x1700 mmxmmxmm weight: 1300 kg 3-jaw-chuck diameter: 160 mm make: FORKKARDT quick change tool holder:: MULTIFIX type: B numbers of toolholders: 6 coolant: misc. accessories: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: WEILER turning diameter over bed: 410 mm centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 200 mm spindle bore: 54 mm spindle taper ISO: 55027/6 spindle turning speed - stepless: 4-3000 U/min tailstock quill taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm feed - longitudinal/cross: 0-20 mm/min rapid traverse longitudinal and cross: 10/5 m/min spindle drive: 9/13 kW dimensions of machine: 2300x1200x1800 mm weight: 2.0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 110 mm turning length: 350 mm center height over bed: 125 mm centre distance: 350 mm bed width: 170 mm spindle bore: 24 mm turning speed range: 440 - 3600 U/min voltage: 380 V weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,25 x 0,55 x 1,25 m - revolver 5-fold - Collet equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2000 mm control: Siemens Sinumerik 805 turning diameter over slide: 430 mm bed width: 480 mm engine output: 27/22 kW spindle head: DIN 55027 Gr. 11 spindle bore: 106 mm speeds: 1 - 1800 U/min Power: 28 KW current capacity: 42 kVA workpiece weight max.: 3800 kg weight of the machine ca.: 5,2 t dimensions of the machine ca.: 4,0 x 2,0 x 1,9 m 2018 Check of the Main Gear Box and change of parts like Bearing, Gears etc CNC control Siemens Sinumerik 805 - 1 Steady 400mm - 1 chuck 400mm - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: 36 mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm centre height: 155 mm centre distance: 800 mm spindle bore: 38 mm spindle turning speed range: 24 - 2800 U/min spindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,026 - 1,253 mm/U feeds - cross: 0,013 - 0,628 mm/U dia. of leadscrew: 24 mm lead of leadscrew: 6 mm tailstock taper MT: 3 tailstock quill stroke: 110 mm total power requirement: 3 kW weight of the machine ca.: 800 kg dimensions of machine L x W x H: 1,80 x 0,70 x 1,23 m Accessories: 3-jaw chuck RÖHM 160 mmø, changing tool post PARAT, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 800 mm greates pass round over bed: 297 mm swing diameter over slide rest: 160 mm spindle bore: 36 mm : MK 3 collet unit: bis 27 Durchmesser turning speeds: 42-2000 U/min dimensions: 1750x500x1200 mm weight: 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 165 mm centre distance: 750 mm spindle bore: 40 mm tailstock taper MT: 3 weight of the machine ca.: 1150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 165 mm centre distance: 750 mm spindle bore: 40 mm tailstock taper MT: 3 weight of the machine ca.: 1150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Weiler W2 hollow: 280 mm centre height: 440 mm bed width: 320 mm weight of the machine ca.: 200 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 2000 mm : 555 mm control: S 3 Weiler : 2 chuck: . mm multifix: . weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg range L-W-H: 2320 x 1400 x 1600 mm Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front ...

turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg range L-W-H: 2320 x 1400 x 1600 mm Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis HEIDENHAIN digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel h ...

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 1100 mm Turning length (Z-axis): 2000 mm Spindle bore: 140 mm Turret positions: 0 Motor power: 1 HP/kW Chuck diameter: 1 mm CNC Brand: Siemens CNC Model: Siemens 805 DBC Turning Length:      2000mm Swing over bed Ø:        1100mm Swing over cross slide Ø:730mm Spindle bore:            256mm Spindle power:           55kW Bed width:               600mm Tailstock spindle Ø:     140Ø Stroke pinole:           300mm Speeds / ranges:         700Rpm Length:                  6500mm Width:                   2100mm Height:               ...

Center height: 120 mm Center distance: 430 mm Spindle bore: 23 mm MACH-id   4135 MAKE       Weiler Germany TYPE         PRIMUS YEAR         90 er SPECIFICATIONS Swing over bed Ø       240 mm Control        Conventionel Swing over cross slide       195 mm Distance between centres      430 mm Spindle bore      23 mm Spindle speeds / ranges    60 - 3000 Rpm Power     1.5 Kw DIMENSIONS Length        1350 mm Width           600 mm Height          1800 mm- Recently new HEIDENHAIN digital readout- Collet device with collets

Turning diameter: 1100 mm Turning length: 3000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Manual Turn CNC latheWEILER - E 110 / 3000 MACH-ID 8510 Make: WEILER Type: E 110 / 3000 Control: SIEMENS 810D Manual Turn Year: 1996  Swing over bed Ø:        1100mm Swing over cross slide Ø:830mm DBC Turning Length:      3000mm Spindle bore:            128mm Spindle power:           45kW Bed width:               600mm Tailstock spindle Ø:     140Ø Spindle taper:           6Mk Workpiece weight:        8000 Speeds / ranges:         1120Rpm Feed rate X-Axis:        10000mm/min. Feed rate Z-Axis:    & ...

Center height: 500 mm Center distance: 3000 mm Spindle bore: 128 mm CNC Brand: Siemens CNC Model: 840 MACH-id    5303 MAKE        Weiler TYPE          E 110 x 3000 YOP            1996 SPECIFICATIONS Max. turning Ø     1100 mm Spindle bore          128 mm Speedrange          1120 Rpm Spindle power           37 kW Control           SIEMENS 840 Chip conveyor        Yes Pinole taper          6 Mk Stroke pinole         300 mm Quill Ø         140 mm DIMENSIONS Length         5400 mm Width           2900 m ...

Turning diameter: 570 mm Turning length: 1000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Swing over bed Ø 570 mm Swing over cross slide Ø 340 mm DBC Turning Length 1000 mm Bed width 350 mm Tailstock spindle Ø 80 Ø Spindle taper 5 Mk Workpiece weight 1300 Speeds / ranges 2500 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 5000 mm/min.

Turning diameter: 720 mm Turning length: 1000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Schunk Rotojet 500 mm Parat tool holder Chip conveyor Coolant system Swing over bed Ø:        720mm Swing over cross slide Ø:430mm DBC Turning Length:      1000mm Spindle bore:            106mm Spindle power:           37kW Bed width:               480mm Tailstock spindle Ø:     115Ø Stroke pinole:           6mm Workpiece weight:        3400 Speeds / ranges:         1800Rpm Feed rate X-Axis:        5000mm/min. Feed rate Z-Axis:        10000mm/min. Length:          &nbs ...

Center height: 190 mm Center distance: 1000 mm Spindle bore: 56 mm MACH-id   5456 MAKE       Weiler Germany TYPE        COMMODOR YOP          1991 SPECIFICATIONS Swing over bed Ø      380 mm Swing over cross slide Ø    190 mm Spindle bore         56 mm Tailstock spindle      ⌀4 ⌀ Speeds / ranges       2000 Rpm DIMENSIONS Length       2500 mm Width        1100 mm Height       1500 mm  

Center height: 140 mm Center distance: 650 mm Spindle bore: 0 mm MACH-id     5455 MAKE        Weiler Germany TYPE          Praktikus YOP            80 er SPECIFICATIONS Swing over bed Ø      280 mm Swing over cross slide Ø    155 mm Spindle bore     40 mm Tailstock spindle     ⌀5 ⌀ Speeds / ranges      3000 Rpm DIMENSIONS Length         2000 mm Width           1200 mm Height          1500 mm

Turning diameter: 730 mm Turning length: 2000 mm Turret positions: 1 CNC Brand: Siemens Teach-in latheWEILER - E 110 / 2000 MACH-ID 7777 Make: WEILER Type: E 110 / 2000 Control: Siemens Sinumrik Year: 1997  Swing over bed Ø:        1100mm Swing over cross slide Ø:730mm DBC Turning Length:      2000mm Spindle bore:            128mm Spindle power:           55kW Bed width:               600mm Tailstock spindle Ø:     140Ø Stroke pinole:           300mm Spindle taper:           6Mk Workpiece weight:        5300 Speeds / ranges:         1120Rpm Feed rate X-Axis:        7000mm/min. Feed rate Z ...

Turning diameter: 720 mm Turning length: 1000 mm Turret positions: 0 CNC Brand: Siemens CNC latheWEILER - E-70 MACH-ID 7768 Make: WEILER Type: E-70 Control: Siemens 810D PowerLine Year: 2000 Multifix tool holders system 3 chuck ca 600 mm diameter CE-Safety Covers DBC Turning Length:      1000mm Swing over bed Ø:        720mm Swing over cross slide Ø:430mm Spindle bore:            106mm Spindle power:           37kW Bed width:               480mm Tailstock spindle Ø:     115Ø Spindle taper:           6Mk Length:                  3200mm Width:                   1800mm Height:    & ...