Number of boring spindles: 3 St. Number of tools: 1.3/4.1. St. Spindle diameter: 50,40 mm Spindle length: 120,320,125 mm weight: 2500 kg loading dimensions L x W x H: 3800x1400x2000 mm table length: 3470 mm Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body ...
Number of spindles: 4 St. Number of tools: 11 St. Spindle diameter: 50,40 mm Spindle length: 285,125 mm length: 4000 mm width: 2000 mm height: 2200 mm Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjusta ...
Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm control: Südtron BT 20 Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 ...
Max cutting width: 310mm, chain width: 340mm, max. passage/entry width: 650mm, saw blade diameter: 300-350mm, length: 1750mm, width: 1750mm, height: 1870mm, weight: 2,06t, with documentation, on-site inspection is possible.
Electronic measuring and display system Weinig type OptiControl with PowerLock for non-contact measurement of the tool dimensions radius (R) and height (H) using a projector with 20x magnification., flight circle (ø): 0 - 300 mm, tool length: 0-310mm
Electronic measuring and display system Weinig type OptiControl with PowerCom and PowerLock for Non-contact measurement of the tool dimensions radius (R) and height (H) using a projector with 20x magnification. By adding the profile data, the computer determines the corresponding setting values, which are sent online to the moulder be transferred. Consisting of: Weinig OptiControl PC with PowerCom software Junction box, Flight circle ø: 0 - 300 mm, tool length: 0-310mm
Planing and molding machine Weinig Unimat 23E for four-sided planing and profiling of wood with groove bed for short and curved workpieces as well as mobile spindle and long dressing table., working width: 230 mm, working height: 160 mm, spindles: 6, spindle 1: Bottom / 5.5 kW / 50 mm, spindle 2: Right / 11 kW / 50 mm, spindle 3: Left / 11 kW / 50 mm, spindle 4: Top / 5.5 kW / 50 mm, spindle 5: Top / 5.5 kW / 50 mm, spindle 6: Bottom / 5.5 kW / 50 mm, Dressing table length: 2.500 mm, feed: 5,5 kW, feed: 5,5 kW, Axial stroke vertical spindles: 80 mm, Axial stroke horizontal spindles: 45 mm, table rollers: Driven table roller in the outlet, Short parts package: Yes, groove bed: Yes, Slot bed milling cutter: Included, Control: Mobile spindle, Axial stroke vertical spindles: 80 mm, Axial stroke horizontal spindles: 45 mm, short parts package: Yes, control: mobile spindle
High-speed planer and moulder Weinig H30 R for four-sided planing and profiling of wet wood (freshly sawn) The machine is in the queue and is being prepared for delivery after the order has been placed., working width: 250 mm, working height: 140 mm, spindles: 5, spindle 1: Bottom (7.5 kW) - counter bearing, spindle 2: Right (11kW), spindle 3: Left (11kW), spindle 4: Above (15 kW) – counter bearing, spindle 5: Below (30 kW) - toothed belt drive / counter bearing, feed: 15 kW, control: ATS system, Powered table rollers: Yes
Knife profile grinding machine Weinig type Rondamat 930 for producing and regrinding profile knives for planer heads using a template., Tool width: Max. 230 mm, Tool flight circle: Max. 300 mm, tool holder: 40 & 50mm, Included: equipment
Weinig Hydromat 2000 planing and moulding machine for four-sided planing and profiling of wood with a groove bed, without Soundproof cabin., Spindles: 5, spindles: 5, spindle 1: Bottom / 7.5 kW, Spindle 1: Bottom / 7.5 kW, spindle 2: Right / 7.5 kW, spindle 3: Left / 11 kW, Spindle 2: Right / 7.5 kW, spindle 4: Bottom / 11 kW, spindle 5: Above / 15 kW, Spindle 3: Left / 11 kW, working width: 230 mm, working height: 160 mm, Spindle 4: Bottom / 11 kW, spindle diameter: 50 mm, Spindle 5: Above / 15 kW, working width: 230 mm, working height: 160 mm, Spindle diameter: 50 mm
Planing and moulding machine Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work CNC controlled spindles and loading magazine Weinig EM11. Optional: Rondomat tool grinding machine (Ref. 1200045) and Opticontrol measuring device, working width: 230 mm, working height: 160 mm, spindles: 8, spindle 1: Bottom / 7.5 kW / HSK Powerlock / 12,000 rpm, spindle 2: Right / 7.5 kW / HSK Powerlock / 4,000 - 12,000 rpm, spindle 3: Left / 11 kW / HSK Powerlock / 4,000 - 12,000 rpm, spindle 4: Right / 7.5 kW / HSK Powerlock / 4,000 - 12,000 rpm, spindle 5: Above / 15 kW / HSK Powerlock / 4,000 - 12,000 rpm, spindle 6: Bottom / 11 kW / HSK Powerlock / 4,000 - 12,000 rpm, spindle 7: Top / 11 kW / HSK Powerlock / 4,000 - 12,000 rpm, spindle 8: Bottom / 7.5 kW / HSK Powerlock / 4,000 - 12,000 rpm, feed: 5.5 kW / 6-36 m/min, Control: ATS system, All spindles: CNC contr ...
Planing and moulding machine Weinig Unimat 17 A for four-sided planing and profiling of wood with long planing table, universal spindle and including planing heads and accessories. Optional: profile cutters and patterns for strip production, spindles: 7, working width: 170 mm, working height: 120 mm, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Right, spindle 5: Upstairs, spindle 6: Below, spindle 7: Universal, Tools: Included
Planing and molding machine Weinig Unimat 30 EL for four-sided planing and profiling of large pieces of wood Loading table (homemade) and including planing heads., spindles: 5, working width: 300 mm, working height: 160 mm, spindle 1: Bottom / counter bearing, spindle 2: Right, spindle 3: Left, spindle 4: Top/counter bearing, spindle 5: Bottom / counter bearing, Tools: Included, Soundproofing: Kashwig
Planing and moulding machine Weinig Profimat 22 N for four-sided planing and profiling of wood with long planing table and including planing heads and accessories., spindles: 5, working width: 220 mm, working height: 120 mm, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Upstairs, spindle 5: Below, Tools: Included
Planing and splitting machine Weinig type Unimat 23 SP with flat magazine Weinig EM 12 and outfeed cross conveyor., Technical specifications: tba
All-round automatic planer and moulder Weinig Powermat 500 for four-sided planing, profiling and ripping Folding device and CNC control in excellent original condition. Spindle 1: Bottom / 7.5 kW / HSK Powerlock / 8,000 rpm Spindle 2: Right / 7.5 kW / HSK Powerlock / 8,000 rpm Spindle 3: Left / 7.5 kW / HSK Powerlock / 8,000 rpm Spindle 4: Top / 7.5 kW / HSK Powerlock / 8,000 rpm Spindle 5: Bottom / 15 kW / HSK Powerlock / 4,000 - 12,000 rpm Includes a set of HSK Powerlock tools/adapters, spindles: 5, working width: 230 mm, working height: 120 mm, Dressing table length: 2.000 mm, CNC Control: for spindle 2,3,4,5, Driven role: in the exit table, Control: PowerCom Plus, feed: 3kW / 5 – 30 m/min
Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with ATS system., spindles: 6, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Right, spindle 5: Upstairs, spindle 6: Below, working width: 230 mm, working height: 120 mm, Dressing table length: 2.000 mm, control: ATS, Control: ATS, delivery time: On demand, sample picture: Illustration similar
Numerically controlled grinding center WEINIG type Rondamat 912 for automatic sharpening of planer heads., spindle diameter: 50 mm, grinding equipment: for planer heads
Planing and molding machine Weinig Profimat 23 for four-sided planing and profiling with universal spindle for pre-planed Wood or other angled (dressed) workpieces such as MDF or plastic parts. The dressing spindle can be retrofitted if required. Spindles: 5 Spindle 1: Right (5.5 kW) Spindle 2: Left (motor together with spindle 1) Spindle 3: Top (4 kW) Spindle 4: Down (4 kW) Spindle 5: Uni (4 kW) Working width: 230 mm Working height: 120 mm Dressing table length: 2,000 mm Feed: 2.2 kW // 5-24 m/min, spindles: 5, spindle 1: Right (5.5 kW), spindle 3: Above (4kW), spindle 2: Right / 7.5 kW / 40 mm, spindle 4: Bottom (4kW), spindle 5: Uni (4 kW), working width: 230 mm, working height: 120 mm, feed: 5 - 22 m/min, Dressing table length: 2.000 mm, control: ATS system, table rollers: Driven table roller in the outlet
Planing and molding machine Weinig Hydromat 30 N for four-sided planing and profiling of large (wet) wood and Beams with high feed and including planing heads for the horizontal spindles., spindles: 4, spindle 1: Bottom / 10 kW / counter bearing / jointer, spindle 2: Right / 10 kW, spindle 3: Left / 10 kW, spindle 4: Top / 10 kW / counter bearing / jointer, working width: 300 mm, working height: 200 mm, table: Solid chrome plated and air cushion, Control: ATS system
Planing and molding machine Weinig Unimat 17 N for four-sided planing and profiling of wood with a long dressing table, Universal spindle and including a set of planing heads and loading magazine for strips (optional), Spindles: 8, Spindle 1: Below, Spindle 2: Right, Spindle 3: Left, Spindle 4: Right, Spindle 5: Upstairs, Spindle 6: Below, Spindle 7: Upstairs, Spindle 8: Universal, working width: 170 mm
Hydraulic fine planing machine Weinig Uniplan 23 for two-sided surface finishing, as an alternative to grinding (e.g. in window construction) with high-performance spindles. • Very good original condition., spindle: 2, working width: 230 mm, working height: 120 mm, spindle 1: Below / 7.5 kW, spindle 2: Above / 7.5 kW, feed: 3 kW // max. 36 m/min, Spindle speed: 7,200 rpm, jointer: Yes, Counter bearing: Yes, short parts package: Yes
Planing and molding machine Weinig Unimat 23 (U23) for four-sided planing and profiling of pre-planed wood, strips or MDF with additional strip removal as special equipment, e.g. for window production (glass strip removal). Very good original condition., spindle: 8, working width: 230 mm, working height: 120 mm, spindle 1: Top / 7.5kW / 40mm, spindle 2: Bottom / 7.5kW / 40mm, spindle 3: Right / 5.5kW /40mm, spindle 4: Left / 7.5kW / 40mm, spindle 5: Left / 7.5kW / 40mm, spindle 6: Right / 7.5 kW / 40 mm, spindle 7: Left / 7.5kW / 40mm, spindle 8: Universal / 4kW / 40mm, feed: 7.5kW
A system for planing/splitting and optimizing wood for strips or other workpieces Consisting of: · Flat magazine Weinig EM 12 · Planer and splitting machine Weinig Unimat 23 SP · Cross conveyor belt · Optimization cross-cut saw Dimter OptiCut 150 with inlet and outlet, Technical specifications: tba
Press for furniture board Weinig Dimter Profipress 4500-2 fully prepared for sale Connected
Knife profiling machine for producing profiled knives from a solid blank according to a template. Technical data: Grinding disc diameter max. 225mm Grinding wheel width 5mm Grinding wheel bore 60mm Tool diameter max. 290mm Tool diameter min 90mm Tool width max 230mm Grinding disc drive 1.1KW Motor speed 1420 rpm Stepless gearbox n=500...3000 rpm Grinding spindle speed n 1 = 1720 rpm n 2 = 2000 rpm n 3 = 2500 rpm n 4 = 2820 rpm Radial clearance angle (at the back) 1030 degrees Axial clearance angle (to both sides) 0.20 degrees Coolant pump 0.28KW
Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder - a set of heads included in the price planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW four upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242 ...
We hereby offer the used Weinig Opticut S50 industrial woodworking machine from 2020, currently available in The Netherlands. This OptiCut S 50 Optimizing Cross-Cut Saw boasts a substantial saw blade diameter of 500 mm, a generous cutting width of 300 mm, and a robust motor power of 5.5 kW, a longstanding member of our cross-cut saw lineup, is renowned for its power, flexibility, and safety. Equipped with user-friendly features and versatile options, it excels in precision cutting for various materials. Different outfeed versions further enhance one-man operation, making it an invaluable asset for efficient and cost-effective production. Features: Leading German solidity (part of the Little group) Specialists in wood optimization. Dutch-language software. Higher production. Lighter and safer work. Suitable for all types of cross-cut work due to design. Large saw blade ensures h ...
Used weinig splitting machine Year 2002 Mod. - j23 double shaft
Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...
Manufacturer: Weinig, Type: Kettenförderssysteme Vereinzelung, Working length mm: 6500 mm, Working widht mm: 2600 mm, Own controller: no, Engine power kW: ca 5, Working hight adjustable mm: 900 mm, FREE TEXT: 5 Mitnehmer Ketten mit 170 mm Abstand,
Manufacturer: Weinig, Type: H 17 AS, Year: 1986, Planing widht mm: 230, Number of spindles: 9, Tool exchange places: yes, Separate engine per spindle: yes, Feeding - kW: 11, Feeding speed min-max m/min: 60, Feeding speed continous adjustable: yes, Table length: ca. 4000 mm, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 5,5, 4th spindle on right kW: 4, 5.Top spindle kW: 7,5, 6th spindle at bottom kW: 5,5, 8th spindle at bottom kW: 7, 8th spindle on left kW: 4, 10th universal on left kW: 5,5, FREE TEXT: Inverter for feeding., Year :1986
Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen.<CRLF>max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300 m ...
Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004
Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 170, Planing hight mm: 120, Spindle diameter in mm: 35, Rotations of spindles max. rpm: 6.000, Spindle arrangement: U / R / L / R / O / U, Feeding - kW: 4, 1.Bottom spindle kW: 4, 3.Left spindle kW: 3, 4th spindle on right kW: 3, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4,
Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998
Manufacturer: Weinig Ferigungsanlage, Control: Weinig, Software: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programming station office: yes, Manufacturer1: Weiniig Profimat, Machine type1: Profimat 23, Year of manufacture1: 1999, FREETEXT1: 5 Spindeln, Manufacturer2: Weinig , Machine type2: Unicontrol 10-5, Year of manufacture2: 1999, Manufacturer3: Weinig Transportsytem, Manufacturer4: Weinig, Machine type4: Unitec 10, Year of manufacture4: 1999, Manufacturer5: Stähle Schleifmaschine,
Manufacturer: Weinig , Type: Unimat 17 A, Year: 1979, Control: hand, Planing widht mm: 10-170, Planing hight mm: 10-120, Min.-max. workpiece length in mm: 300, Number of spindles: 6, Diameter of the spindle mm: 30, Fast exchange device: no, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Fully suspended drive feeding: no, Year :1979
Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995
Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992
Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant str ...
Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999
Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 180, Planing hight mm: 120, Number of spindles: 7, Elektronische Achsverstellung: no, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 350, Wellendrehzahl: 6000, Spindles: 6, Spindle diameter in mm: ca 40, Spindle arrangement: U / R / L /R / O / U / Uni, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 4, 4th spindle on right kW: 4, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4, 7th universal on left kW: 4,