used WEISSER for sale

White 91 Portioning Machine used Hourly capacity approx.: 1400 portions Ejector diameter: 90mm (other plates on request) Strength adjustment via sliding handle at the front Machine with corresponding traces of use and wear, but in good condition neat and quiet run Machine must be thoroughly cleaned before use Video about test run available

White PF90/180-REG portioning machine used Hourly output approx.: 2000 servings Ejector diameter: 90mm (Other drums on request) Thickness adjustment via drum possible Operation via foot pedal, if you go down from it, the machine stops Poti for speed regulation is fixed, should be made viable, or replaced Machine with corresponding signs of use and wear but in good condition neat and quiet running Machine must be thoroughly cleaned before use New list price 2019 in this equipment: 16850,- EUR net Video about test run and other pictures available

Vertical lathe Year : 1999 Siemens struerung

turning diameter: 150 mm turning length: - mm turning height: - mm control: SINUMERIK 840D SL x-axis: 830 mm z-axis: 180 mm rapid power traverse in X-and Z direction: 30 / 60 m/min turning speeds: 4500 U/min spindle head: A6 spindle motor: 27 kW spindle bearing diameter: 90 mm circle diameter: 670 mm chucking diameter: 210 mm total power requirement: 36 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 2,5 x 2,5 x 2,6 m multifunctional, single-spindle Pick-up lathe with vertical spindle Slide arrangement. - CNC control Siemens 840D SL - C axis - Chip conveyor - cooling unit - Feeding - disc turret with tool drive 12-fold 2 identic units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 2000 mm spindle turning speed range: 5,6 - 1120 U/min number of feeds: 40 spindle bore: 56 mm longitudinal feeds:: 0,056 - 12,8 mm/U face feeds: 0,028 - 6,4 thread - mm pitch: 0,5 - 112 mm thread - module: 0,125 - 28 mm thread - inch: 1 -56 Gang / inch. total power requirement: 7,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3,5 x 1,2 x 1,5 m • fixed steady • cooling device • thread cutting automatic - GSA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: ca. 500 mm swing diameter: ca. 600 mm travel -x axis: ca. 400 mm travel -z axis: ca. 600 mm spindle turning speed range: 2000 U/min spindle drive: 63 kW control: SIEMENS control: SINUMERIK System 3 tool turret: 1 x 12 Pos total power requirement: kW weight of the machine ca.: 9,3 t dimensions of the machine ca.: m - R-version, turret right hand side of 3-jaw chuck - Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:400 mm turning length:120 mm control:Sinumerik 840 D weight of the machine ca.:11 t dimensions of the machine ca.:4,1 x 2,2 x 2,5 m CNC Vertical Turning Lathe with SIEMENS SINUMERIk 840 D Control out of OEM Production in good condition. More Technical Features: x-axis 400 mm z-axis 280 mm rapid power traverse in X-and Z direction 60 / 30 m/min feeding force 10 / 8 kN turning speeds 3000 U/min front bearing 90 mm

Description: Machine number: 177055919 Control system: SIEMENS SINUMERIK 840 D Chuck diameter: max. 210 mm Turning diameter: 400 mm Workpiece length: 120 mm X-axis travel path: 1130 mm (total travel path) X-axis travel path (working path): 400 mm Z-axis travel path: 280 mm Rapid traverse X-axis: 60000 mm/min Rapid traverse Z-axis: 30000 mm/min Motor spindle: Spindle diameter in the front bearing: 90 mm Spindle speeds: Rotating spindle speed range infinitely variable: max. 6000 rpm Disk turret with holder for driven tools: 8 pieces Shank diameter: 40 mm Spindle speed: max. 4000 rpm Torque: max. 50 Nm Working range with vertical drilling spindles Number of drilling spindles: 3 Spindle speed: max. 5000 rpm Drive power: 16 kW Torque: max. 83 Nm Incl. 8-station tool turret and a power chuck (diameter: approx. 250 mm) from the manufacturer SMW Incl. conveyor station from the manufacturer SCHNA ...

Description: Turning diameter 450 mm x-axis 330 mm z-axis 650 mm Tailstock stroke 880 mm Spindle bearing diameter 150 mm Spindle speed max. 5,000 rpm Tool speeds 12,000 rpm Rated current 102 A Description: Equipment see attached list Cooling unit Chip conveyor IFS room air filter type IFM 2000 control: SINUMERIK 840 D, turning speed range: 5.000 rpm, total power requirement: 42 kW, weight approx.: 22,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,800 x 3,100 mm

Description: Swing diameter max. 300 mm Travel - X 280 mm Feed rate X - axis 0.1 - 30,000 mm/min Rapid traverse X - axis 30 m/min Travel - Z 1,150 mm Feed Z - axis 0.1 - 60,000 mm / min. Rapid traverse Z - axis 60 m/min Spindle bearing diameter 90 mm Spindle head according to DIN 55026 - size A6 Speed 1 - 5.000 rpm Tool turret - number of stations 12 Tool holder Capto C4 Total power requirement 45 kW Description: CNC lathe with SIEMENS SINUMERIK 840D control, screw conveyor with chip breaker and return pump station, NC steady rest SMW-SLU-1-OLD Ø10-70mm, 12-position tool turret SAUTER 0.5.440.220, NC tailstock, Artis breakage monitoring, pick-up loading via pallet belt. Without coolant system, was connected to central supply. The machine can be demonstrated under power. turning diameter: 250 mm, Drehlänge: 400 mm, x-motion: 280 mm, z-motion: 1,150 mm, control: Siemens ...

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 40 bar -Liter output: 11 +4 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 1.5 kW 1410 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Price: per piece -Number: 3x available -Dimensions: 600/1000/H850 mm -Weight: 220 kg

Hello; We are selling our beautiful dispenser that fills all types of liquids (compote - alcohol etc.) quickly and efficiently. This dispenser can be used to fill all types of liquids and containers. The setting is very simple to operate. The machine is made of stainless steel and is very durable. NEAR MINT CONDITION The Professional kit includes : -Compressor (lowered machine kit): Ideal for not carrying your kegs. Angled outlet with anti-drip system. -Pneumatic pedal (for fast, efficient work). -Adjustable stainless steel tray. - Brand WEISSER -

Center height: 999 mm Center distance: 1500 mm Spindle bore: 161 mm DBC Turning Length:      1500mm Swing over bed Ø:        1140mm Swing over cross slide Ø:810mm Swing in the gap Ø:      1420mm Gap length:              575mm Spindle bore:            161mm Tailstock spindle Ø:     140Ø Stroke pinole:           250mm Spindle taper:           6Mk Speeds / ranges:         1120Rpm Length:                  4500mm Width:                   2200mm Height:                  2200mm Weight:            & ...