used WOHLENBERG for sale

Description: Very well preserved heavy-duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Details: Model PT1-1070II Year of construction 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Geometry Santer turret Turning diameter over bed 1,070 mm Turning diameter via support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm. Quill diameter 200 mm Quill stroke 350 mm Spindle passage 128 mm Conveyor Drilling rig incl. boring bar length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Bezel 4 quill 500 mm open Main drive motor 71 kW incl. documentation

Guillotine Make Wohlenberg Model 155 MCS-2TV Year 1988 Cuttinglenght 1550 mm Details Mechanical cutting Hydraulic clamp Digital readout on a monitor + programming Light curtain safety Details with 2 almost new spare knives, sticks, books, knife changing tools, fully functional machine Video

Cutting length 76 cm, see also pictures 1 knife set extra Continue: 1 cutting knife KLINGELNBERG / IKS 1390 x 160 x 14 mm

2020 Type: PBW12.956/300 PUR - gluing device with remote diagnosis with cooling and drying sections with three cutters – System DGR D09 With compressor in-house compressed air supply / chip extraction located: Germany Available: immediately

Paper cutting machine Wohlenberg 92 Year of construction: 2002

Perfect binder Wohlenberg Sity 500 Year of construction 2000 from school - almost didn't run. Oрtу Compressor

Programs, Air Side Tables, Chrome Air Table, Light Bariers, Standard Accessories

Programs, Light Barier, Side Tables, Standard Accessories

FEATURES: GIDDINGS & LEWIS 8000 CNC CONTROL, RETROFITTED 2000 55.12" DIAMETER FACE PLATE CHUCK WITH JAWS 16.92" DIAMETER BORING BAR BORING HEADS (2) W-AXIS POSITIONING X-AXIS TAPER FEED PRESSURE MEASURING DEVISE HARDENED & GROUND WAYS COOLANT SYSTEM WITH POLO PAPER FILTRATION PRAB CHIP CONVEYOR SYSTEM CAPACITY: MAXIMUM SWING OVER BEDWAYS 62.99" BORING DIAMETER SOLID BORING 12.4" TREPANNING 2" TO 25" COUNTER BORING WITH PILOT PRE-BORE + 25" MAXIMUM BORING DEPTH, Z-AXIS 396" LENGTH OF BED 1,176" WIDTH OF BED 39.37" MACHINE WEIGHT 180,000 LBS WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE 1.8-355 RPM SPEED RANGES 4 MAIN SPINDLE DIAMETER FRONT BEARING 11.81" MAIN SPINDLE BORE 6.4" MAXIMUM TORQUE, 31 RPM AT 180 HP 39,900 FT/LBS MAXIMUM WORKPIECE WEIGHT (1) REST 88,000 LBS MAXIMUM WORKPIECE WEIGHT (2) RESTS 110,000 LBS MAXIMUM WORKPIECE WEIGHT (3) RESTS  ...

WOHLENBERG pro-tec 137 with ASE – cutting line  Wohlenberg 137  Year / SN 2007  Airtable  Touchscreen  CIP3 + CIP4 compatible  ASE  Photocells  Program  Sidetable  Baumann NUP 1000 – Stacklifter  Max Sheetfed size: 135cm x 110cm  Baumann BSP 3 L – Vibrator  Papersize: 80cm x 114cm  Baumann BA 3 – 1400 – Unloader  Papersize: 80cm x 140cm  Mettler Toledo Scale

Air table 2 side tables 3 knives Photo cells Program

Cutting machine Wohlenberg 92 MCS-2 TV, air table, light barriers, program control, machine number 3265-014, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

4X RESERVE KNIFE FOR WOHLENBERG 155 Format (cm): 155 1x brand new / unused

Cutting machine Wohlenberg 76 SPM, machine number 3364-037, air table, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Cutting machine Wohlenberg 92 SPM, machine number 3388-010, program control, air table, light barriers, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm

Machine No.: 3857-006 Programs, Side Tables, Light Bariers, Air Table, Standard Accessories

Original digital program MCS 2 Central and side air tables Light guards. 2 Knives. Complete cleaned, checked and tested In full working order mechanical and electrical Available immediately.

Wohlenberg VARIO S perfectbinder Technical Details No. 82298 Year: 1988 Size: max- 305 x 460 mm min- 105 x 140 mm Ticknes: max- 60 mm min- 2 mm Open size: max- 655 x 470 mm min- 210 x 140 mm Speed: 7000 tact/h Equipment: 26 clamps, central adjustment for clamps ect Additional Information Typ: Wohlenberg Year of man. 1988 Condition: very good Available: immediately Description Wohlenberg 460 gathering machine Format: max- 320 x 460 mm min 70 x 105 mm Speed: 7000 tact/h, 16 automatic stations Wohlenberg trimmer 44 FM Uncuted size: max - 315 x 460 mm Cuted size: max 300 x 440 mm min- 70 x 80 mm Speed: max - 3000 tact/h min - 1200 tact/h Wohlenberg ZS 12 (booklet stacker) Size: max 410 x 10 mm min 145 x 90 mm Ticknes: max 60 mm min 5 mm Speed: 12.000 tact/h

Perfect binder line WOHLENBERG GOLF 370 consist of: Gathering machine WOHLENBERG SPRINTER 7000 1994.year 16 automatic station with double and mis control (4 unit x 4 station) hand feed station criss-cross delivery pumps, documentation conected to Binder WOHLENBERG GOLF 6000 1994. year Max size of book 370 x 320 x 50 mm opticontrol for book size on enter proces vibrator for book block milling and rughering station extraction sistem with 2 bags hot melt side unit with 2 disc hot melt spine unit with 2 rolers PUR melt spine unit with 2 rolers and PUR Nordson melter 20 kg PUR station for cleanig cover feeder with duble and mis sensor control 15 clamps 1 x press station for conection of cover and bookblock 2 x press station for forming spine and side of book delivery table pumps, spare parts, dokumentation ...

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

Wohlenberg WB390 Master binder Perfect binding machine Age: 1993 Handfeed station Vibrating station I + II 18 clamps Milling and roughening station Hotmelt Spine and Side glueing with Premelter Gouzing Station Cover Feeder Delivery

year 1994,Digital program,Air table ,Light guards,Side tables with air,2 knifes in complete working conditions. Available immediately

program with 12 monitor Air table Side table right with air Side table left with air Photocell Optical cut-off sandeuter Downside stroke right 2 Knives Still in operation: No Available: immediately

Digital Program Air table Side table right with air Side table left with air Photocell Cutting sanduder 2 knives Unloader BA 7 Still in operation: No Available: immediately

Wohlenberg Sprinter Gathering Machine 24 stations -> ACC false and double arc detection -> Criss Cross display Built in 1998 and extended in 2006 incl. blower and vacuum pumps

Wohlenberg 92 Cut Tec Year of construction: 2002 Cutter version with monitor Air table, 2x side tables, spare blades Very good condition! At call!

Wohlenberg Sprinter 7011 Gathering Machine 24 stations Equipment: -> Preparation for inline operation with perfect binder (e.g. Golf 6001, Champion 8000, Master 6501/7000, etc.) Drive for single and inline machines -> manual feeding station incl. control for automatic switching on and off -> additional blowing air in the transport duct -> Criss Cross Display -> ACC Automatic Caliper Control automatic sheet thickness control, self-learning, for > Faulty sheet inspection > Double-sheet inspection > plus/minus control -> electric disconnect clutch 12/13 station Factory specification format size: max. 460 x 320 mm min. 105 x 75 mm maximum product thickness 80 mm Built in 1998 and extended in 2006 incl. blowers and vacuum pumps NEW: Video part1/2 on youtube Price plus VAT EXW. All information is subject to change. Subject to prior sale. Dealer ...

AIR TABLE SIDE TABLE TFT MONITOR PROGRAM SPARE KNIFE

CUTTING MACHINE - WOHLENBERG MCS-2 Cutting width 92 cm Year of prod. 1984 AUXILIARY TABLE SHAKER Very good condition Connected, can be viewed and tested - out of production price: on request

turning diameter over bed: 920 mm turning diameter over slide rest: 720 mm turning length: 4000 mm turning speeds: 1,4-280 U/min digital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 520 mm centre height: 500 mm width: 130 mm quill:: 3 St. diameter of quill: 70 mm bearing diameter: 65 mm width: 20 mm base plate: 415x270 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mm turning diameter over slide rest: 1070 mm turning length: 7000 mm turning speeds: 2,24-450 U/min Control: faceplate: 1400 mm spindle passage: 160 mm steady: 400 mm drive capacity - workpiece: 63 kW Tail stock:: elektr. diameter of quill: 200 mm bed width: 950 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 5000 mm spindle bore: 82 mm turning speeds: 3,55-710 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: 2 total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 760 mm turning length: 2500 mm spindle bore: 104 mm turning speeds: 3,55-710 U/min faceplate: 1000 mm steady: turning dia. in gap: 1345 mm length of gap: 400 mm workpiece weight: 10000 kg total power requirement: kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mm turning length: 4000 mm control: Siemens type: 810 T turning diameter over slide: 700 mm spindle passage: 104 mm bed width: 710 mm turning speeds: 3,55-710 U/min max. workpiece weight between centres: 5000 kg steady: 500 mm Holder Multifix: total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 50-355 mm bore depth: 4000 mm swing diameter: 1000 mm centre height: 500 mm full boring: 18-100 mm main spindle bore: 163 mm turning speeds: 56-710 U/min workpiece weight: 6,3/10 t Tailstock: 70-600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 780 mm turning length: 4100 mm Control: Siemens type: 840 D bed width: 710 mm faceplate: 1000 mm turning speeds: 1110 U/min total power requirement: 4,79-69 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1020 mm turning diameter over slide rest: 680 mm turning length: 3100 mm spindle bore: 108 mm faceplate: 1000 mm steady: 500 bed width: 570 mm Rapid travel: turning speeds: 4,5-900 U/min digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 650 mm turning length: 3500 mm spindle bore: 108 mm faceplate: 1000 mm steady: 500 Control: Siemens type: 840 D bed width: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mm turning length: 8500 mm control: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mm speed: 1,12 - 1120 m/min voltage: 480 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1320 mm turning diameter over slide rest: 820 mm turning length: 4400 mm Control: faceplate: 1200 mm bed width: 800 mm spindle passage: 167 mm steady: 480 control: IMS total power requirement: 76 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 8500 mm turning diameter over bed: 1070 mm turning diameter over slide rest: 800 mm spindle bore: 128 mm turning speeds: 1,12 - 1120 U/min Control: Alan Bradley 9-series total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m 3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels) 800 mm 4-Jaw Chuck Tailstock Quill diameter Ø 200 mm Tailstock Taper M.T. 6 Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: t bed width: ca.450 mm : 199€ . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 165 x 1150 mm Equipments: Large side tables display Safety cells Air tables left, center and right spareknives program