used ZENO for sale

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 2300 Year of construction: 2010 Specifications: Main drive power: 1 x 75 kW, 134 A rpm: 1500 Hydraulic drive power: 5.5/0.75 kW, 11/1.9 A rpm: 1.500 60s Cutting Crowns Weight: approx. 14,000 kg

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1400 x 1600 Year of construction: 2010 Specifications: Main drive power: 1 x 45 kW, 81 A rpm: 1500 Hydraulic drive power: 2.2 kW, 5.0 A rpm: 1.420 Rotor flight circle: approx. 380 mm 40 mm cutting crowns 52 Tools/Cutting Crowns Weight: approx. 5,400 kg Hint: The gearbox housing had a hairline crack, which was glued. (see pictures) It may have to be replaced.

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Secondary shredder with feed hopper with screw discharge Rotor 1000 mm diameter x 700 mm wide 10 rotor blades, 2 stator knives Motor 110 kW (other motor size available on request)

Secondary shredder with feed hopper with screw discharge Rotor 1000 mm diameter x 700 mm wide 10 rotor blades, 2 stator knives Motor 110 kW (other motor size available on request)

Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

SPECIFICATIONS: Crushing chamber mm: 2000 x 1500 Rotor length mm: 800 Installed capacity KW: 18 Capacity: 300/500 kg per hour Screen diameter mm: 18 Hydraulic operation

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW

SPECIFICATIONS: Hopper size mm: 1600 x 1400 Rotor length mm: 1400 Installed capacity KW: 37.0 Capacity per hour: 700/1000 Kg Screen diameter mm: 16 Hydraulic operation Application Refiner

Disc separator Zeno, type ZSS 1200 x 4500, with FE separator and conveyor technology, very good condition Specifications Disc separator with elevation Manufacturer: Zeno Type: ZSS 1200 x 4500 Year of construction: 2015 Grain size: 0-30 mm Working width: 1200 mm Length: 4500 mm Drive power: 3 x 7.5 kW Separate control panel Elevation height: 1000 mm FE separators Manufacturer: Solau Type: DND-AC M5 Working width: 800 mm Drive power: 2.2 kW Self-Cleaning Device – Wiper Conveyor Feed belt Length: 5000 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.3 m/s Discharge belt Length: 3500 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.4 m/s Discharge height: min. 2000 mm Collection belt fraction 0-30 mm under disc ...

Drum screen ZENO ZTS 2500, built in 2016, with warranty New drum screen. The machine was never put into operation. It is currently stored by the manufacturer Zeno. The drum screen is suitable for the separation of municipal waste, plastics, paper, Cardboard, wood waste. Specifications: Manufacturer: Zeno Type: ZTS 2500 Year of construction: 2016 Drive power: Electric motor 18.5 kW / 400V Capacity: 100-150 m3 per hour 3 levels of material separation: up to 80 mm, 80-320 mm, over 320 mm First separating stage: 0 - 80 mm Length: 6,250 mm Second separating stage: 80 - 320 mm Length: 3,750 mm Third separating stage: over 320 mm Working width: 2,500 mm Total length of drum screen: 10,000 mm Total machine length: approx. 12,000 mm Colour of the machine: RAL 6029 The scope of delivery includes: Feed hopper for feeding the drum screen via a conveyor belt Screen cov ...

CATALOG NO. 7239 TECHNICAL DATA - shaft width 350mm - shaft diameter 260mm - inlet width 350mm - inlet height 120mm - number of knives 11 pcs - autoreverse - sieve dimensions 18x12mm - toothed shaft pulling from the bottom 0.75kW - toothed shaft pulling from above 0.75kW - with vibrorine - vibrochute length 3280mm - vibrochute width 335mm - vibrochute motor 0.75kW - main engine 22kW - feeder dimensions length/width/height 3280x600x510mm - machine dimensions length/width/height 1600x950x850mm - weight 1150 kg – German production - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 36900 PLN Net price: 8200 EUR depending on the price 4.50 EUR Net price: 9711 USD depending on the price ...

CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

- German production - new knives and counter knife TECHNICAL PARAMETERS: - infeed size 520x1000 mm - motor power 80 kW - four rows of knives - Counter knife - sieve 20 x 20 mm - sieve size 1000 x 900 mm - rotor diameter 600 mm - shaft speed 830 rpm Dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Exhibition machine Inlet width: 1,400 mm Inlet height: 550 mm Rotor diameter: 1,600 mm Chopping knife count: 4 pieces Counter-knife number: 1 pc. with cutting gap adjustment Feed unit: 2 x 5 rollers Drive: 250-500 kW Machine weight: approx. 30,000 kg

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal

ZENO Disc Screen ZSS 1200 x 4200 Working width: 1200 mm working length: 4200 mm drive: 2 x 7.5 kW screen fraction: 0-80 mm disk diameter: Ø 350 mm

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

Feed opening: 800 x 1,000 mm; Hopper capacity: 0.8 m³; Throughput : 2.5 - 4 rm/h Material and screen dependent; Rotor diameter: 300 mm; Rotor length: 800mm; Number of tools: 20 teeth; Screening: hydraulic moving floor: Yes; Suction nozzle: 250mm; Air velocity: 28 m/sec; Motor power: 15kW; Hours: 4165;

Rotor Diameter: 1000 mm