fresadoras usadas para la venta

x-travel: 290 mmy-travel: 150 mmz-travel: 330 mmtable surface area: 210 x 600 mmtotal power requirement: 9,5 kVAweight of the machine ca.: 730 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine is in very good condition and comes from aa training workshop.Equipment:Safety cover and LED lamp retrofitted in 20163-axis active digital readout from HeidenhainFixed angle tableCoolant equipmentTechnical data:Longitudinal table movement, motorised / manual 290/300 mmHeadstock transverse movement, motorised / manual 150/160 mmVertical support movement, motorised / manual 330 / 340 mmWork spindle drive 1.5/1.9 kWNumber of milling spindle speeds 16Speed range 40 - 2000 1/min.Horizontal milling spindle Tool holder Standard taper 40Feed range infinitely variable 5 - 500 mm/min.Creep speed 4 mm/min.Rapid traverse 1200 mm/min.The data for this ad was created with ModulMWS - the software  ...

x-travel: 400 mmy-travel: 400 mmz-travel: 340 mmspindle taper ISO: 40 CNC-control: DIALOG 4 spindle turning speed range: 31,5 - 5000 U/mintable-size: 700 x 460 mmtable load: 350 kgfeeds -stepless-: 2 - 6000 mm/minquill stroke: 80 mmpower capacity: 5,5 kWcoolant: voltage: 380 Vtotal power requirement: 5,7 kWweight of the machine ca.: 2,0 tdimensions of the machine ca.: 2,25 x 2,00 x 2,00 melectric cabinet: 1,45 x 0,70 x 1,65 m- Serial-No.: 2803-3571 / 21099- control: DIALOG 4- electronic hand wheel- coolant equipment- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmdigital readout: Heidenhain 3 Achsen spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/mintable-size: 650 x 375 mmweight of the machine ca.: 1,5 tdimensions: ca. mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-axis digital read outhorizontal and vertical milling spindlequillTechnische Daten / technical details:Längsweg X / X-travel longitudinal 500 mmQuerweg Y / Y-travel cross 400 mmSenkrechtweg Z / Z-travel vertical 400 mmTischgröße / table size 800x460 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpmVorschubbereich / feed range 8-630 mm/min.Antriebsleistung Frässpindel / power capacity milling spindle 4,4 kWGewicht der Maschine / weight 1500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solu ...

weight of the machine ca.: 5 tworking width: max. 300 mm: 6 extensive accessories: viele Wechselräder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 310 mmy-travel: 340 mmz-travel: 170 mmtotal power requirement: 2,5 kWweight of the machine ca.: 900 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 500 mmy-travel: 350 mmz-travel: 380 mmtable-size: 790x360 mmspindle turning speed range: 63-4000 U/minspindle taper ISO: 40 quill stroke: 50 mmrange L-W-H: 1600x2000x1850 mmdigital readout: PHILIPS weight of the machine ca.: 1.4 tActive Digital read outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 250 mmgear width: 40 mmmax. module: 8 min. module: - Control: total power requirement: 9,7 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 2,65 x 1,90 x 2,05 m- CNC control- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 620 mmgear width: 90 mmmax. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Gradspindle taper: metr. 100 milling head speed: 28 - 56 U/minconnected load: 18 kVAControl: total power requirement: 14 kWweight of the machine ca.: 12 t- CNC control- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: . mmy-travel: . mmz-travel: . mmControl: Heidenhain type: TNC 135 table surface area: 1300x400 mmturning speeds: 2800 U/mincoolant: total power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 2500 mmy-travel: 1300 mmz-travel: 900 mmControl: Heidenhain iTNC 530 table surface area: 2500 x 800 mmtable load: 5,0 ttool taper: SK 50 DIN69871spindle turning speed range: 36 - 4000 U/minfeed range: 2 - 12000 mm/minmain drive: 25 kWtotal power requirement: kWweight of the machine ca.: 17 tdimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) mThe main engine was overhauled in September 2022 for € 6,000.The machine was partially overhauled in 2007Scope of overhaul:Feed motors were overhauledNew Heidenhain iTNC 530 control system with newmain spindle drive (Siemens)Retention of the control cabinet and feed drivesGeometric overhaul of the machineOverhaul of the tool changerDefective guideway covers were repaired or replacedThe milling head was completely overhauled approx. 3 years ago.Equipment:CNC control Heidenhain iTNC 530Horizontal/vertical swivelling milling headSeparate CN ...

MAHO Lid CNC MH 600E Metal milling machine with rotary table 500mm MAHO – Deckel MH 600 E CNC Metal - Milling Machine X = horizontal longitudinal axis travel 600 mm Y = vertical axis 400 mm Z = horizontal travel 400 mm B= NC rotary table d= 500 mm 7 T grooves 14 H 7 Spindle holder ISO 40 Quill spindle stroke 80 mm Spindle speeds 80 - 4000 rpm Gear stages 18 Feed range 0.1 - 2000 mm/min Rapid traverse: x = 4 / y = 3 / z = 5 m/min Table load workpiece and clamping device 300kg Spindle motor 4 kW 400V 50 HZ Total power requirement 16 kVA YOC 1988 With coolant device Machine weight ca. 2,6 t Weight: 2500 kg with path control CNC 432 E Handwheel splash guard booth, Switch-on hours: 29004 G&-5018-M3OWI Accessories: Kohn Spann - Vice with stop 130x 180mm G&-5019-M3OWI

No. 3999: 1 used Universal tool milling machine Make HERMLE, type UWF 801, 1988 with Heidenhain TNC 135 Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid Table 800 x 390 mm Chip tray Documentation Other: Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg

Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg

CORREA A 25/30 fixed bed milling machine Status: Running. Table dimensions: 3,000 x 1,000 mm Number of T-slots: 8 T-slot dimensions: 22 mm X travel: 3,000 mm Y travel: 1,200 mm Z travel: 1,000 mm Head model: Universal Manual Tool clamping: Hydraulic Cone: ISO 50 Maximum weight on table: 7,000 kg Approximate machine weight: 19,000 kg Machine dimensions: 7,810 x 4,664 x 2,750 mm The year of manufacture 1988, in 2018 the motor, head and program + screen were changed. You can test we have it in operation.

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Description: Attention: As the forklift is still used for sporadic loading, collection is only possible at the end of the loading period. A vehicle with an access ramp is required for collection.serial number: 351,802,030, loading capacity: 3 to, length of forks: 2,000 mm, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,200 x 2,500 mm, weight approx.: 5,000 kg

x-travel: 700 mmy-travel: 550 mmz-travel: 500 mmspindle taper ISO: 40 control: Heidenhain type: TNC 155 milling-head swivable +/-: boring spindle: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head