Fabricante:
(Categoría: 106)
pressure:050 tthroat:255 mmstroke:8 - 120 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:380 mmtable surface area:640 x 500 mmhole in the table:250 x 180 mmtable height over floor:710 - 930 mmtable adjustable:220 mmram surface:550 x 170 mmram adjustment:70 mmpower requirement:4,0 kWweight:3,1 tdimensions (WxDxH):1,5 x 1,5 x 2,3 m
Spindle press Reissmann AG Saalfeld-Saale for stone production of alumina Built in 1951 Weight 4000 kg L x W x H: 220 x 150 x 300 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm
Description: Fabrication number: 8733 Compressive force in kg: 12000 Dimensions of lower plate: approx. 405 x 390 mm Top plate dimensions: approx. 165 x 100 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 500 x 1,700 mm ... más información
Pressure capacity: 85t/850kN, ram stroke: 30-110mm, ram adjustability: 50mm. Documentation available. ... más información
pressure:150 tthroat:350 mmstroke:6 - 122 mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:820 x 600 mmhole in the table:330 mmtable height over floor:820 mmram surface:500 x 350 mmram adjustment:75 mmpower requirement:10,0 kWweight:7,3 tdimensions (WxDxH):1,6 x 2,2 x 2,9 m
Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press-Manufacturer: Müller, hydraulic single-column press type HEP15-Pressing force: 15 tons-Clamping table: 900 x 500 mm-Projection: 265 mm-Max. Stroke: 430 mm-Operation: foot pedal-Motor: Siemens 4.0 kW-Dimensions: 1450/900/H2300 mm-Weight: 1646 kg
Description: Size: 30/180 Pressure capacity: 30 to Cutting area with material 45 kg strength: 665 mm² Adjustable stroke: 8 - 76 mm Adjustability of the ram: 40 mm With protective screen control from the manufacturer SCHWARZ Dimensions of lower plate: approx. 650 x 350 mm Dimensions of upper plate: approx. 200 x 200 mmweight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,400 x 2,100 mm
pressure: 8 tthroat: 115 mmstroke: 8-56 mmram - range of adjustment: 30 mmtable surface area: 390x230 mmram surface: 155x125 mmhole in the table: 105x75 mmtable height: 820 mmtool hole in ram: 35 mmweight of the machine ca.: 800 kgdimensions of the machine ca.: 1000x1000x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:150 tthroat:350 mmstroke:6 - 122 mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:820 x 600 mmhole in the table:350 mmtable height over floor:800 mmram surface:500 x 350 mmram adjustment:75 mmpower requirement:10,0 kWweight:7,1 tdimensions (WxDxH):1,5 x 2,1 x 2,9 m
pressure:100 tthroat:315 mmstroke:30 - 160 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:460 mmtable surface area:910 x 680 mmHole in the table:400 mmtable height over floor:800 mmpassage to the back:400 mmram surface:630 x 400 mmram adjustment:80 mmpower requirement:7,5 kWweight:7,5 tdimensions (WxDxH):1,7 x 2,0 x 3,0 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic
pressure: 160 tdayligth: 600 mmstroke: 25 - 150 mmtable surface area: 1500 x 900 mmram surface: 1500 x 900 mmram adjustment: 100 mmdaylight between the columns: 1500 mmdaylight between the side columns: 400 x 200 mmdistance between columns: 1680 mmweight of the machine ca.: 15 tdimensions of the machine ca.: 2,7 x 1,8 x 4,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tthroat: 340 mmstroke: 20-120 mmno. of strokes: 45 Hub/minram - range of adjustment: 100 mmtable surface area: 800x620 mmram surface: 500x400 mmhole in the table: Ø 360 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 12 tdimensions of the machine ca.: 2200x2000x3600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:10 tstroke:400 mmtotal power requirement:1,6 kWweight of the machine ca.:1,1 tdimensions of the machine ca.:1100 x650 x 2050 mmdayligth:500 mmtable-size:400 x 450 mmDocuments:vorhanden ... más información
Stroke adjustment: 29-160mm, ram adjustment: 130mm, stroke speed: 48/min, connected load: 14kW. ... más información
pressure: 65 tthroat: 370 mmstroke: 29-151 mmno. of strokes: 50 Hub/minram - range of adjustment: 80 mmtable surface area: 1300x700 mmram surface: 1000x600 mmhole in the table: ¦ 110 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 6 tdimensions of the machine ca.: BxTxH 1700x2000x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 tthroat: 330 mmstroke: 20-120 mmno. of strokes: 50 Hub/minram - range of adjustment: 100 mmtable surface area: 800x640 mmram surface: 500x400 mmhole in the table: Ø 330 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: 1500x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:500 tdistance between columns:2400 mmstroke:400 fix mmno. of strokes:13 - 23 /minDistance table/ram, max. stroke up, adjustment up:1600 mmtable surface area:2300 x 1800 mmcolumn travel -side:1600 mmram surface:2170 x 1800 mmram adjustment:300 mmtotal power requirement:110,0 kWWeight:135,0 tDimensions (WxDxH):3,35 x 4,85 x 7,0 mclutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric
pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:60 - 180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:560 x 400 mmhole in the table:150 mmtable height over floor:800 mmpassage to the back:240 mmram surface:355 x 220 mmram adjustment:50 mmweight:3,0 tdimensions (WxDxH):1,0 x 1,4 x 2,2 minfinitely variable drive:Stöber overload protection in ram:mechanical NEW electrical controls:Pilz
Plunger pressure 4 t Stroke rate 70 / min ... más información