otras máquinas para el plástico usadas para la venta

Label and cap remover machine from PET bottles: 3 x 1 m diam. Grille hole: 50 mm, axle rpm: 700 rpm, engine: 37 Kw (50 hp). Year: 2016.  ... más información

Plastic bag ripper An operational BRT Hartner (Schilz-O-Mat) brand device for tearing, emptying plastic bags and transferring their contents by conveyor belt. The design makes it possible to tear and empty waste bags of different sizes without disturbing their contents. The machine underwent a major overhaul in 2016 (year of manufacture 1998).

Machine manufacturer: ROLL O MATIC Machine model: DELTA 1100 Year of manufacturing: 2016 Materials: HDPE – LDPE - BIO Condition: in production Working hours: 812 Hours Complete line: YES Machine dimension: (length 17.5m /width 3.5m /height (2.5m to 3.3m) Welding width: 900 (3 X 300) Plastic type bag: T-shirt bag / bottom seal bag Final positioning of the bags: roll Bag length: Max: 3000mm; Min: 250mm Bag width: Max: 3X250mm; Min: - mm Film thickness: Max:60 microns; Min: 8 microns Bottom gusseting: No Side gusseting: Yes Depth: 150mm Output: Cycles/minute: 300 Production: Meters/min: 160 Unwinder: Type:Width + motorized shaft Mother roll width: 1700 Mm Unwind shaft: Number: X 1 ; Type: Pneumatic Mother roll diameter: 800 mm Web guide: Yes Sealer/Longitudinal: Yes Number lanes: 3 Photoelectric cell control: YES Sealing bar: Bottom Drive: Servo Control ...

There are 6 identical KraussMaffei profile saws available. Individual weight: approx. 800kg. ... más información

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 700 - 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... más información

Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... más información

Compressed air supply: 6bar, connected load: 2.7kW, weight: 450kg. ... más información

Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: R410A. Chilled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: 35°C. Length: 1100mm, width: 750mm, height: 1100, empty weight: approx. 220kg. ... más información

6 identical timing belt conveyors MK Technology Group are available. Total load: up to 250kg, speed: up to 60m/min. On-site inspection is possible. ... más información

2017 ProJet 2500Plus, defective as a spare part carrier or for repair. Machine reports error with support feed. According to 3D Systems, repair costs can be between €1,000 and up to €7,000. Device was last serviced in 2023 and has printed components in good quality., Possibly defective components:, - DMC Board, - Carriage Board, - PDAC-Board, - Umbilical track, [Buy 2017 3D Systems ProJet 2500Plus now](https://www.layerbylayer-shop/p/2017-3d-systems-projet-2500plus), Technology: MultiJet Printing

A ProJet 2500Plus from 2017 is being sold. The device is in perfect condition, test printing is possible (compensation for expenses, which will be charged upon purchase)., Accessories: EasyClean system from 3D Systems, second construction platform, Technology: MultiJet Printing ... más información

For sale here is a 3D printer from the BigRep brand Studio G1. This machine is a showroom unit and will be serviced by a specialist dealer before delivery. The software comes from the manufacturer BigRep, which is closely based on the well-known Cura., operating hours: few, Installation: 2017, Installation space in mm (x/y/z): 1000x500x500, software: BigRep Blade, network connection: USB / Network, support material: Compatible with all popular 3rd party filaments , Layer thickness: 0.1mm 0.4mm, number of nozzles: 2, extruder units: Fiber-Ready Dual Extruder, Print bed temperature in °Celsius: Max. 100°C, Weight in kg: about 600KG, Power supply: 208V - 240V, 16A, 50/60Hz, security certification: CE approval, building material: BigRep ASA, BigRep ABS, BigRep BVOH, BigRep HI-TEMP, BigRep HI-TEMP CF, BigRep PA6/66, BigRep PETG, BigRep PLA, BigRep PLX, BigRep PRO HT, BigRep TPU 98A Comp ...

Used dyeing machine DM60 from Dyemansion for additive manufacturing for sale. Machine is in very good condition., color range: Unlimited, Color cartridge options: S,M,L,XL, DM Black L-R, throughput time in minutes: 150, Operating temperature: Up to 115°C | Up to 240°F, capacity per pass: E.g. up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5 Stratasys H350 build space, process chamber: 80l | 21.1gal, Maximum part size (Ø x H): 390mm x 360mm | 15.3inch x 14.2inch, Dimensions in mm (w x h x d): 950mm x 600mm x 945mm, Compatible Technologies: SLS, SAF, MJF & HSS On request: SLA & DLP & CDLP / CLIP, penetration depth: Depending on the material (approx. 0.2mm for EOS PA 2200)

EnvisonTEC DLP 3D printer for sale. Accesories: - Software CD Perfactory Software Suite & Magics EnvisionTEC - UV light curing station model ACC-03-1001 - Laser glasses - Various consumables, Installation space in mm (x/y/z): 300x200x275, Layer thickness: 50-100, Weight in kg: about 270 ... más información

Used HP4200 MultiJetFusion 3D printer in good condition for sale, Equipment:, 1 piece Processing stations, 2 pcs. Build Units ... más información

Well-maintained Mark Two 3D printer in good condition for sale. Running time: 4015 hours or 556 prints., Equipment:, - some remaining materials can be purchased additionally (expiration date expires), - 1 piece dry box for material storage, Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass), network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: CE, nozzle diam ...

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (Silicone Rubber [Low Hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: colored touch panel - Dimensions: 95 x 70 x 136 cm - Weight 188 kg

Automatic door handle for making holes for the handle in the window. Automatischer Türöffner zum Bohren von Löchern für Fenstergriffe.  ... más información

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use ... más información