sierras usadas para la venta

Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW  ... más información

Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices

Inv. Num. : 5876 Type: ARG 640 DC SAF Producer: PILOUS Created: 2016 Parameters: Minimum belt feed speed: 20 m/min Maximum belt feed speed: 90 m/min Cutting area: 640 mm Saw blade size: 5770x41x1.3 mm Total power requirement: 8.8 kW Length: 3800 mm Width: 2050 mm Height: 2500 mm Weight: 4200 kg Equipment: 2x roller conveyor G1000 (length 3000 mm)

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc  ... más información

Inv. Num. : 7367 Type: 335 GA Producer: MEBA Created: 2012 Parameters: Minimum belt feed speed: 15 m/min Maximum belt feed speed: 150 m/min Saw blade dimensions: 4400 x 34 x 1.1 mm Cutting area: 335 mm Length: 5350 mm Width: 2300 mm Height: 2000 mm Weight: 2020 kg  ... más información

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding  ... más información

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade  ... más información

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm  ... más información

Saw motor, pole-switchable approx. 1.0 / 1.8 kW Saw blades 360 mm 6 cutting speeds : 16 / 20 / 25 m/min 32 / 40 / 50 m/min Cutting range 90 degrees with blade size 360 mm : round 110 mm flat 200 x 80 mm Weight approx. 560 kg

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are "newly rubberized" / re-occupied IDEAL Tape Welding Machine Table tilted

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

ELUMATEC SA 142/35 automatic circular sawing machine was built in 2001 in Germany. This extremely powerful machine is used for the precise and fully automatic cutting of aluminium and PVC joinery. The workpieces are fed into the workspace on roller conveyors with a option of single, double or triple feeding by means of a special switch. Material infeed is also supported by clamping cylinders, which ensures that the process runs safely and without any interruptions. The material is then cut into the large work space by a reliable circular saw with the option to freely adjust the cutting angle from 90° to 45°. The ELUMATEC aluminium profile sawing machine has so far only been used for cutting aluminium profiles. The total weight of the machine is 770 kg. Technical specifications of the ELUMATEC SA 142/35 aluminium sawing machine - cutting angle: 90° to 45° - maximum cutting uni ...

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of selecting single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.  ... más información

FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER

WE OFFER AN VERY NICE DOALL HEAVY SAW - NC FULLY AUTOMATIC WITH COMPLETE CONWENYOR RAILS AND SPARES BLADES ON STOCK 13X NEW BLADES INCLUDED CUTTING CAPACITY: 100 -700mm 100W x 100H - 800W x 700H mm BLADE SIZE: 8250 x 67 X 1,6 mm SPEED: 16-85mm TENSION: BY HYDRAULIC COOLANT: 230L FEEDING LENNGHT : 400mm SINGLE TIME OR MULTIPLE TIMES DIMENSIONS OF MACHINE: 3910 W x 2330H x 2350L WEIGHT: 7000 KG FOR OUR CUSTOMERS WE ORGANIZE TRANSPORT WORLD WIDE MAKING EXPORT DOCUMENTS