subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 1009)
ID3307 2 piece Rope drum 2 piece Rope drum (e.g. for floating grabs), drum diameter: 550 mm, drum length: 2620 mm, drum wall thickness (where the rope moves): 14 mm, rope diameter: 24 mm 2 pieces rope drum (for e.g. floating grabs), drum diameter: 550 mm, drum length: 2620 mm, drum wall thickness (where the rope moves): 14 mm, rope diameter: 24 mm
Load capacity: 227kg, max. tilt angle: 3.5°, max. wind speed: 9.4m/s, platform height: 5800mm, operating pressure: 207bar, max. tire load: 570kg, weight: 1312kg. The battery is defective and the machine cannot be moved for long. Replacing the battery will probably solve the problem. Documentation available.
With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.
Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation. ... más información
Hydraulic pressure: 120bar, with Two-Cylinder Diesel Motor, scoop, the tires and rims were renewed. ... más información
A dedusting system for asphalt mixing plants is available. Extraction volume: 90,000Nm³/h, effective exhaust gas volume: 130,000m³/h, filter area: 1105m². ... más información
Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.
Power: 403kW, max. drilling depth: 108m, max. drilling diameter: 311mm, chassis: crawler chassis, dimensions X/Y/Z: approx. 10500mm/2500mm/3800, weight: approx. 31000kg, operating hours: 12300h. Including 36m drill pipe on the boom (without drill bit) and new 72m drill pipe as replacement. Compressor must be checked. On-site inspection is possible.
JPC HT12 brand mini excavator without limit price.Year of manufacture 2023, as can be seen in the pictures with engine oil pressure display and voltage display as well as hour counter.Serial number: MD202311083Co-op motor air cooledapprox. 1020kgL: 2.75mB: 0.925mH: 2.25m ... más información
New stock promotional mini excavator KS10-8 with Kinkmatik for online auction! Minimum price = limit price!Adjustable chassis not available!Very friendly maintenance access to the engine compared to the other models.Dimensions: 2.850x0.954x2.211 mDigging depth: 1,580m without quick couplerDigging height: 2,620m without quick couplerKoop 1-cylinder engine with 7kW Articulated armStandard spoon 40cm20cm spoon80cm rigid trench clearing bucketMechanical quick couplerFilter set and tool box,Mechanical thumb gripper included!As can be seen in the pictures with 2 small paint damages!Viewing is possible by telephone arrangement, and online purchase is also possible.
Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple-Manufacturer: Atlas Weyhausen, clamshell bucket-Bucket width: 610 mm-Filling capacity: 350 liters-Opening width: 1420 mm-Total height: 2080 mm-Mounting bolt: Ø 45 mm, dimensions see photos-Transport dimensions: 1420/610/H1580 mm-Weight: 697 kg
Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple-Clamshell grab: bucket width 300 mm-Opening width: 1665 mm-Total height: 2320 mm-Mounting bolt: Ø 60 mm-Intermediate size: 270 mm, dimensions see photos-Transport dimensions: 1665/360/H1880 mm-Weight: 732 kg
Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple-Clamshell grab: bucket width 790 mm-Hydraulic drive: Thumm 708 HZ-4D/SAE-Opening width: 1880 mm-Total height: 2550 mm-Mounting bolt: Ø 45 mm, dimensions see photos-Transport dimensions: 1880/790/H1800 mm-Weight: 1240 kg
Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple-Manufacturer: Atlas, clamshell bucket-Bucket width: 400 mm-Opening width: 1520 mm-Total height: 2190 mm-Mounting bolt: Ø 45 mm, dimensions see photos-Transport dimensions: 1520/500/H1685 mm-Weight: 682 kg
Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket-Excavator bucket: heavy design, very stable-Width: 600mm-Height: 440mm-Depth: 900 mm-Inner mounting width: 200 mm-Hole: bore Ø 40/50 mm, dimensions see photos-teeth-the holder on the spoon: can be changed by us for an additional charge-Transport dimensions: 900/600/H670 mm-Weight: 116 kg
backhoe bucket, excavator bucket, trenching bucket, excavator bucket, ejector bucket-Excavator bucket: hydraulic ejector bucket, heavy duty-Width: 400mm-Height: 830mm-Depth: 1330 mm-Inner mounting width: 240/270 mm-Hole: bore Ø 72/60 mm, dimensions see photos-the holder on the spoon: can be changed by us for an additional charge-Transport dimensions: 1330/400/H1050 mm-Weight: 289 kg
Swing bucket, excavator bucket, swing bucket, trench cleaning bucket, trench bucket, hydraulic dozer bucket-Manufacturer: Lehnhoff, hydraulic leveling bucket, swivel bucket type 902 Lit.-Width: 2000mm-Contents: 0.0790 m³-Height inside: 700 mm-Depth: 580 mm-Hole: Ø 60/70 mm-Intermediate size mount: 285 mm, dimensions see photos-Transport dimensions: 1980/1335/H580 mm-Weight: 636 kg
Wheel loader mount, adapter frame, universal carrier, fork carrier-Wheel loader mount: fork carrier, solid design-Mounting: shaft Ø 38/ 51 mm, dimensions see photos-Forks: can be supplied at an additional cost, large selection available-Dimensions: 1000/170/H670 mm-Own weight: 134 kg ... más información
Description: CASE CX80C Mini Excavator PIN  , ,DCH080R6NGE6B160Approx. Onsite Dimension. (l x w x h): 6,680 x 2,320 x 2,760 mm, weight approx.: 8,690 kg ... más información
Description: RHINOCEROS XN10 Mini Excavator no.  , ,21F051077 50 hours according to counterApprox. Onsite Dimension. (l x w x h): 2,770 x 1,190 x 1,850 mm, weight approx.: 850 kg ... más información