subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
turning diameter:402 mmturning length:750 mmcontrol:FAGOR 8037 turning dia. over face-slide:245 mmturning diameter over bed slide:380 mmbed width:250 mmspindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750 mmpower requirement:4 kWweight of the machine ca.:1050 kgdimensions of the machine ca.:2000x1115x1670 (LxBxH) mmturret:8 fachCNC controller:FAGOR 8037 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents
turning diameter:360 mmturning length:530 mmcontrol:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mmswing diameter over bed slide:360 mmBar capacity:64 mmspindle speeds:3500 1/minspindle speed:Gegenspindel: 5000 1/minx-travel:230 mmy-travel:±51 mmz-travel:600 mmrapid power traverse in X-and Z direction:30 m/minspindle drive:17 (Hauptspindel) kWspindle drive:5,5/7,5 (Gegenspindel) kWMachine size (LxWxH):3290x2180x2337 mmmachine weight:6100 kgc-axis:0.001 °turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mmhollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 barhydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 20 ...
turning diameter:402 mmturning length:1000 mmcontrol: 8055 turning dia. over face-slide:245 mmturning diameter over bed slide:380 mmbed width:250 mmspindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750 mmpower requirement:4 kWweight of the machine ca.:1050 kgdimensions of the machine ca.:2250x1115x1670 (LxBxH) mmturret:Multifix CNC controller:FAGOR 8055 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents
turning diameter over bed:650 mmturning diameter over slide:450 mmturning length:1435 mmbed width:350 mmspindle bore:155 mmspindle speed:50-800 (3 stufig, stufenlos) U/minspindle taper:A2-11 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:220 mmtailstock quill diameter:95 mmtailstock quill taper MT:5 MKtool post size:25x25 mmpower requirement:7,5 kWweight of the machine ca.:2400 kgdimensions:3020x1140x1770 mmDRO:von FAGOR 3 Achsen Modell 40iTS mit konstanter Schnittgeschwindigkeit fixed steady:Option follower rest:Option tool holder:4-fach 3 jaw chuck Ø:400mm, vorne und hinten (2 Stück), mit Bohrung 155mm, und 2 Satz weiche Backen splash guard:am Schlitten mit Mikroschalter anti vibration pads:6 StückFactory new center lathe with 2-axis digital display and variable speed and many more.CHARACTERISTICS:Powerful, flexible and productiveWith an optimal pric ...
turning diameter over bed:1630 mmturning diameter over slide rest:1190 mmturning length:5000 mmcentre height:800 mmswing in gap:2100 mmbed width:1000 mmmax. workpiece weight:12000 (zw. Spitzen) kgnumber of spindle speeds:16 4 - 242 U/minspindle bore:120 mmtailstock quill diameter:180 mmtailstock quill stroke:350 mmWeight approx.:22 ttotal power requirement:ca. 25 kwHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm
turning diameter over bed:2300 mmturning diameter over slide rest:1860 mmturning length:5000 mmcentre height:1150 mmswing in gap:- mmlength of gap:- mmfaceplate:1500 mmbed width:1000 mmmax. workpiece weight:zw. Spitzen: 15000kg, m. Lünette: 20000 kgnumber of spindle speeds:3-300 U/minspindle bore:206 mmtailstock quill diameter:- mmtailstock quill stroke:- mmWeight approx.:26 tspindle drive:50 kWDRO:optional 4 jaw chuck:1500 mmHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm
turning diameter:300 mmturning height:300 mmtotal power requirement:70 kWweight of the machine ca.:11,5 t ... más información
turning length:1500 mmweight of the machine ca.:6 ttool taper:VDI40 transport dimensions LxWxH:3,9 x 2,0 x 2,5 mSpindle running hours : 23149 ... más información
turning diameter:570 mmturning length:2000 mmcontrol:FANUC O i TF turning diameter over bed slide:490 max. swing over slide:360 mmbed width:350 mmspindle taper:A2-8 spindle speeds:0-2500 1/min.spindle bore:80 mmtailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:2000 mmchuck size:250 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2970 kgdimensions of the machine ca.:3325x1350x1810 mmautomatic tool changer:12-fach, VDI 30 3-jaw hydraulic chuck:250 mmtools:1 Satz New CNC lathe KRAFT KT 285/2000 with Fagor 8055.Made in Europe, Picture similiar.For more information please see the attached documents
faceplate diameter:5700 mmswing diameter:6300 mmturning height:4000 mmtotal power requirement:DC 110 kWworkpiece weight max.:100 ttable speeds:0.2 ~ 20 U/minTorque:des Tisches 300 kN.mslide stroke:vertikal: 2000 mmram diameter:280 mmrapid traverse:2000 mm/mincontrol:CNC Siemens oder Fanuc _head swivability:-15°?+30 °weight of the machine ca.:127 tRams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories.Further technical details and accessories appearing in Appendix.
turning diameter over bed:2600 mmturning diameter over slide rest:2200 mmturning length:5000 mmfaceplate:2050 mmnumber of spindle speeds:0,7 - 70 rpmtotal power requirement:ca. 22 kwHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm
faceplate diameter:3500 mmswing diameter:3800 mmturning height:2300 mmmax. turning diameter:3800 mmtable load:40 ttable speeds:10 - 38 1/mintransmission ratio:2 Stufencross travel of ram-slide:rechts: 2500 mmcross travel of ram-slide:links: 2200 mmTravel of Ram (vertical):1500 mmtotal power requirement:70 kWRams:2 Stück
turning diameter:450 mmturning length:1000 mmcontrol:FANUC OI TF max. swing over slide:260 mmbed width:300 mmspindle taper:A2-6 spindle speeds:0-3000 1/min.spindle bore:65 mmtransmission ratio:1 tailstock quill diameter:68 mmtailstock quill stroke:200 mmtaper of tailstock quill:4 MKmax. length of work piece:1000 mmrapid traverse x/z:12/15 m/minpower requirement:9 kWweight of the machine ca.:1400 kgdimensions of the machine ca.:2800x1215x1750 mmautomatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz 3 jaw chuck Ø:200 mmlive center:4 MK:aus Guss New CNC lathe KRAFT ST 225/1000 with FANUC 0i mate TDMade in EuropeFor more information please see the attached documents
faceplate diameter:4000 mmswing diameter:4300 mmturning height:2060 mmspindle drive:55 kWCNC controller:NUM T PLUS 2 axis Used CNC Vertical Turret Lathe (overhauled in 2010).Further technical data and accessories, as defined in Appendix.Warranty: noTake advantage of the favorable leasing and rental conditions of ABC Leasing. Ask us about it.
faceplate diameter:7100 mmswing diameter:8000 mmturning height:5000 mmtotal power requirement:DC 132 kWworkpiece weight max.:180 ttable speeds:0.2 ~ 20 U/minTorque:des Tisches 300 kN.mslide stroke:vertikal: 2500 mmram diameter:320 mmrapid traverse:2000 mm/mincontrol:CNC Siemens oder Fanuc _head swivability:-15°~+30 °weight of the machine ca.:127 tRams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories.Further technical details and accessories appearing in Appendix.
swing diameter:400 mmcontrol:840 D SIEMENSturning speeds:3500 1/minz-axis:340 mmx-axis:1350 mmworkpiece height:400 mmTorque:820 turret head:12 Pos.rapid traverse:Z 30 / X 60 m/mintool holder:VDI 50 spindle head:A8 DIN 55026 spindle motor:60 kWweight of the machine ca.:14,8 tdimensions of the machine ca.:6 x 3,3 x 3,4 mlive tools,C-axis,workpiece storage left side,high pressure pump,chipconveyor,
turning diameter over bed:850 mmturning diameter over slide rest:510 mmturning length:3000 mmtravel of cross-slide cross:600 mmmovement of the upper support:250 mmbed width:600 (Monoblock) mmspindle bore:100 mmspindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/minmetric threading:56,1~120 mmfeeds - longitudinal:0,08~9,6 mm/minfeeds - cross:0.04~4,8 mm/minrapid traverse longitudinal and cross:3640/1800 mm/mintailstock quill diameter:120 mmtailstock quill stroke:250 mmtaper in tailstock:6 MKmain drive motor:15 kWmax. workpiece weight between centers:4000 kgWeight approx.:6800 kgmachine width/height:1500x1500 mmmachine length:5150 mm4-jaw independent chuck:800 mmsteady fixed:Ø40~350 (mit Rolleneinsätzen) mmfixed steady:Ø100~520 (mit Rolleneinsätzen) mmfollower rest:Ø30~120 mmmultifix tool holder:Größe C Factory new heavy duty turning machine bran ...
Lathe with 4 tools only for 3-cylinder crank shaft ... más información
turning diameter:380 mmturning length:750 mmcontrol:Manual Plus Heidenhain spindle bore diameter:45 mmpower main drive with:11 / 9 kWmain spindle speeds::3800 1/minmachine weight ab.:1900 kgdimensions of machine:2400 x 1600 x 1900 mmteach-in lathe incl. electronic handwheelsincl. collet system 173 Estatic steadymoving steadycooling systemaccessories toolholder system PARAT 25 x 25manualssteady movedsteady rest3-chaw-chuck SCHUNK Rota S plus D = 250 mm Under power in our showroommain spindle with new bearings ( 0 hours working ) approx. 28.600 h "machine on"