subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
:KTH 400 | KTH 500 turning diameter:805 | 1010 mmturning length:1000/2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:515 | 718 mmbed width:425 | 500 mmspindle taper:A2-8 (opt. A2-11, A2-15 oder A2-20) spindle bore:105 (opt. 155/230) | 130 (opt. 155/230/310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:106 | 120 mmtailstock quill stroke:215 | 300 mmtaper of tailstock quill:6 MKpower requirement:17 | 22 kWautomatic tool changer:8-fach mit 4-Werkzeughaltern CNC controller:Siemens/Fanuc/Fagor tools:1 Satz :aus massiven Gusselementen CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents
turning diameter:256 mmturning length:455 mmswing diameter over slide rest:260 mmtravel -x axis:198 mmtravel -z axis:508 mmturning speed range - main spindle:4800 1/minpower capacity - main spindel:18 / 11 kWC-Axis:0,01 °turret (x-stations):12 x VDI 30 PosNumber of driven tools:6 Postool taper:VDI 30 Spindle speed driven tools:5000 min -1spindle hollow:52 mmrapid power traverse in X-and Z direction:30 m/minpower capacity - driven tools:4,4 kWtotal power requirement:25 kVAweight of the machine ca.:4 to.dimensions of the machine ca.:3,1 x 2,3 x 2,2 mCNC lathe with tailstock,12-Pos. turret (6 pos. for live tools), chipconveyor,hollow clamping cylinder,graphic simulation and collission check,ethernet, USB,chipconveyor,parts catcher,tooleye,flush gun,collet chuck KITAGAWA CRL60A6,tailstock manually, quill programable,LED light,machining of plastic material only!hour meter: approx. 18.000h "m ...
:JAP 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 (opt. A2-11, A2-15, A2-20) ASAspindle speeds:0-1400 (opt. 0-1000, 0-750, 0-560) 1/min.spindle bore:130 (opt. 155,230,310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse); 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:17 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2270 x 2290 mm:gem. 8605 DINautomatic tool changer:8-fach (Schaft: 32x32mm und Bohrstange:Ø50mm), Hersteller Duplomatic oder Barufaldi mit 4 Haltern CNC controller:Siemens 828D/Fanuc 0iTF/Fagor 8060T tools:1 Satz gear box:von Barufaldi, 2-stufig spindle:Hochpräzisionsspindel CNC controls from: ...
bar material dia.:10 mmturning length:105 mmturning speeds:15.000 / 10.000 U/minnumber of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 18i-TB total power requirement:3,5 kVAweight of the machine ca.:1,5 tdimensions of the machine ca.:1,9 x 0,8 x 1,7 mtoolpiece turning speed range:8.000 1/minmain spindle power:3,7 kWsub spindle power:1,1 kWCNC sliding headstock machine,subspindle,7 axis (X1, Z1, Y1, C1, X2, Z2, C2),barloader LNS TRYTON 112 A-B,Fireextinguisher KRAFT und BAUER,parts-ejector,coolant tank,machining with oil as coolant,reading hours:approx. 38.000 hours "machine on", approx. 27.000 hours "machining"
turning diameter:80 mmturning length:235 mmmax. bar capacity:42 mmpower capacity - driven tools:1 kWspeeds spindle 1:6000 1/minspeeds spindle 2:5000 1/minnumbers of turret head positions:8 posdrive capacity - spindle motor:SP1 11 / SP2 5,5 kWTools speed:60-6000 1/minweight of the machine ca.:ca. 3 tdimensions of the machine ca.:2,4 x 1,5 x 1,6 mHigh Performance CNC Turning- and Milling Center - chipconveyor- subspindle- live tools- C-axis- brake- partscatcher and partsconveyor- tool eye- barloader LNS HYDROBAR MINI-SPRINT approx. 5000 working hours
Description: Chuck 10' Spindle A2-8turning diameter: 295 mm, Drehlänge: 700 mm, serial number: L10 h-1120301AAB, turning diameter over slide: 400 mm, x-motion: 250 mm, z-motion: 750 mm, Accessories included: No, control: Hurco Max, toolchanger positions: 12, number of controlled axes: 3, spindle bore: 78 mm, tool taper: VDI 40, turning speed range: 3,000 rpm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,300 x 2,000 mm
Description: • Diesel forklift, fork hoist, fork truck, lift truck • Serial number H2X351N01711/2002 • Lifting capacity 3000 kg • Maximum lifting height 5700 mm • Minimum height passage 2920 mm • Fork lenght 1200 mm • Maximum fork width 1120 mm • With lateral movement • Duplex mast • Solid tyres • Operating hours according to the counter approx. 20021. This machine will be used to carry out the disassembly and loading work of this auction, so the working hours at the time of delivery will be around 20100 • PERKINS engine, power 38 KW • ATTENTION! Delivery of this item will be mid-July 2024 at the earliest, it is not possible to charge any fees to Surplex until the date of delivery • For the loading a truck with loading ramp is required or a mobile crane what causes additional fees • Please note that the delivery term 'loaded on truck' is only valid for the m ...
swing diameter:260 mmcontrol:840 D SIEMENSturning speeds:3.500 1/minspindle drive:36 / 28 kWchucking diameter:260 mmtravel -x axis:900 mmtravel -z axis:400 mmturret head:12 Pos.tool holder:VDI 40 rapid power traverse in X-and Z direction:100 / 30 m/mindimensions of the machine ca.:5,3 x 2,4 x 3,31 mCNC vertical lathe with 2 spindles,2x RÖHM power chucks dia. 315mm,
Description: • Diesel forklift, fork hoist, fork truck, lift truck • Serial number N005B03890F • Lifting capacity 4000 kg • Maximum lifting height 5250 mm • Minimum height passage 2440 mm • Fork lenght 1200 mm • Maximum fork width 1400 mm • With lateral movement • Triplex mast • Tilting mast up to 6° • Twin wheels in front • Solid tyres • Operating hours according to the counter approx. 21027. This machine will be used to carry out the disassembly and loading work of this auction, so the working hours at the time of delivery will be around 21100 • CUMMINS engine, power 58 KW • ATTENTION! Delivery of this item will be mid-July 2024 at the earliest, it is not possible to charge any fees to Surplex until the date of delivery • For the loading a truck with loading ramp is required or a mobile crane what causes additional fees • Please note that the delivery ...
turning diameter over bed:280 mmturning diameter over slide rest:160 mmturning length:600 mmupper head travel:100 mmradial face slide travel:150 mmbed width:180 mmspindle head:DIN 55022 Gr. 4 spindle diameter in front bearing:85 mmspindle bore:39 mmtaper bore:d. Hauptspindel MK 5power capacity:2,4 kWturning speed range:48 - 2500 U/minfeeds - longitudinal:0,019 - 1,92 mm/Ufeeds - cross:0,0095 - 0,960 mm/Uthreading:27metr.Steig. 0,25-12mmdiameter of quill:40 mmquill stroke:85 mmColour:6011/grün RALvoltage:380 / 50 V / Hzweight of the machine ca.:660 kgdimensions of the machine ca.:1580x670x1200 mmNice machine from first handincl. Collet clamping System plus 1 pcs Colletincl. Multifix toolhoder system plus 1 toolholder machine under power for testingmore accessories on regrest
turning diameter:620 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:540 mmbed width:350 mmspindle taper:As-8 spindle speeds:0-2500 1/min.spindle bore:105/155 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2300/2515/3010/3700 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 310 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents
turning diameter:570 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:490 mmbed width:350 mmspindle taper:As-6 spindle speeds:0-3000 1/min.spindle bore:80 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2250/2475/2970/3640 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 285 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents
turning diameter:450 mmturning length:1000/1500 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:260 mmbed width:300 mmspindle taper:As-6 spindle speeds:0-3000 1/min.spindle bore:65 mmtransmission ratio:1 tailstock quill diameter:68 mmtailstock quill stroke:200 mmtaper of tailstock quill:4 MKmax. length of work piece:1000/1500 mmrapid traverse x/z:15/12 m/minpower requirement:9 kWweight of the machine ca.:1400/1680 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 225 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents
turning diameter:360 mmturning length:750/1000 mmcontrol:Fanuc/ Fagor/ Siemens max. swing over slide:300 mmbed width:250 mmspindle taper:As-5 spindle speeds:0-4000 1/min.spindle bore:42 mmtransmission ratio:1 tailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750/1000 mmrapid traverse x/z:15/12 m/minpower requirement:7,5 kWweight of the machine ca.:1200/1490 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 180 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents
:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mmswing diameter:1250|1600|2000|2300 mmturning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mmtable speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/mintransmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 tmax. torque on the faceplate:20|25|25|25 KNrapid feed of tool post:8000|3000|3000|3000 mm/minfeed speeds:0.1 - 500 mm/minMax. cutting force of tool head :18|25|30|30 KNmTravel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mmTravel of ram (horiz.):850|1000|1115|1400 mmCross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mmpower maindrive:22/30|30/37|37/45|37/45 kWweight of the machine ca.:9|12,5|18,5|20,5 tMachine size (LxWxH):2360x2277x3403|2660x2660x3698|3 ...
turning diameter over bed:402 mmturning diameter over slide rest:245 mmturning length:750/1000 mmcentre height:200 mmbed width:250 mmmax. workpiece weight between centres:280/300 kg:135 kgspindle bore:42 mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minlongitudinal feed:0.05-0.752 mm/Ucross feed:0.025-0.376 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:58 mmsleeve conus:4 MKquill stroke:180 mmfixed steady::Ø 10-125 (110-200 opt.) mmwith live steady:Ø 10-80 mmpower requirement:4 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 200 SeriesMore information can be found in the appendix
turning diameter over bed:502 mmturning diameter over slide rest:310 mmturning length:1000/1500 mmcentre height:250 mmbed width:300 mmmax. workpiece weight between centres:450/750 kg:225 kgspindle bore:58 (opt. 105) mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minspindle nose:A2-6 (A2-8 opt.) longitudinal feed:0,05-0,752 mm/Ucross feed:0,022-0,296 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:69 mmsleeve conus:4 MKquill stroke:200 mmpower requirement:5,5 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 250 SeriesMore information can be found in the appendix
turning diameter over bed:652 mmturning diameter over slide rest:450 mmturning length:1000/1500/2000/3000 mmcentre height:325 mmbed width:350 mmmax. workpiece weight between centres:1125/1690/2025/2815 kg:360 kgspindle bore:85 (opt. 105/155) mmspindle turning speed range:30-1500 (3 Getriebestufen) (opt. 80-1250/50-800) U/minlongitudinal feed:0,05-1,5 mm/Ucross feed:0,025-0,752 mm/Umetrical thread cutting:0.5 - 15 mm/Uthreading WHITWORTH:60-2 TPIrange of module thread:0,25-7,5 mm:120-4 mm/min.diameter of quill:95 mmsleeve conus:5 MKquill stroke:220 mmfixed steady::Ø 10-180 (180-400 opt.) mmwith live steady:Ø 10-140 mmpower requirement:7,5 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 325 SeriesMore information can be found in the appendix
turning diameter:652 mmturning length:1000/1500/2000/3000 mmcontrol:Siemens 808D turning diameter over slide rest:595 mmcentre height:325 mmbed width:350 mm:360 kgspindle taper:5 MKspindle nose:A2-8 spindle bore:80/105/155 mmspindle turning speed range:30-1700 (3) U/minlongitudinal feed:0-5000 mm/Ucross feed:0-5000 mm/Udiameter of quill:95 mmsleeve conus:5 MKquill stroke:220 mmfixed steady::Ø 10-125 (110-200 opt.) mmwith live steady:Ø 10-80 mmpower requirement:7,5 kW:8605 DINWeight approx.:1,9/2,2/2,6/3,2 tCNC controller:Siemens 808D (Fagor/Fanuc als Option) multifix tool holder:mit Werkzeughaltern center morse:2 StückBrand new Center Lathe KRAFT DLZ 200 SeriesMore information can be found in the appendix
:SS-27 | SS-31 | SS-35 turning diameter:700|790|890 mmturning length:700/1200/1700/2200/3200/4200/5200 mmcontrol:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mmspindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/minspeed steps work spindle:4-stufig (automatisch schaltend) cross feed:0,001~250 mm/minfeed in z-axis:0,001~400 mm/minrapid travel - longitudinal/face:8/10 m/mindia of ball screw:45 mm in X-Achse / 60 mm in Z-Achse tool turret:10- oder 12-fach tool taper:VDI 40/50 oder Schaftaufnahme tool holder -shaft diameter:32x32 mmdiameter tailstock quill:160 mm:200 mmtailstock quill taper MT:5 spindle drive:30/37 (37/45 opt.) kWservo motor X-axis:3,8 kwservo motor Z-axis:3,8 kwweight of the machine ca.:11t für Spitzenweite 700mm (weitere 500mm: 1,5t) tCNC controller:Siemens/Fanuc/Fagor steady rests:manuell und hyd ...