- Atomáticos de multiuso (22)
- Automáticos de alimentos (3)
- Automáticos de doblaje largo (7)
- Automáticos de doblaje largo CNC (31)
- Bancos de postgiro (3)
- Camas inclinadas CNC (3)
- Centros de torneado CNC (191)
- Centros de torneado horizontal (19)
- Centros de torneado verticales (3)
- Lunetas (13)
- Máquinas de accionamiento central (1)
- Maquinas de doblaje largo CNC (27)
- Máquinas de elaboración final (1)
- Máquinas de mandril de tres levas (1)
- Máquinas giratorias de alta presición (1)
- Máquinas giratorias de presición (8)
- Otros tornos (35)
- Platos de torno (2)
- Tornos (160)
- Tornos automáticos (13)
- Tornos automáticos de barras (2)
- Tornos automáticos husillo de barras (2)
- Tornos automáticos monohusillo de barras (7)
- Tornos automáticos multihusillo de barras (14)
- Tornos cíclicos (39)
- Tornos cíclicos CNC (50)
- Tornos CNC (496)
- Tornos con husillo de cilindrar y roscar (290)
- Tornos de barras (22)
- Tornos de doble husillo CNC (14)
- Tornos de husillos excavados (2)
- Tornos de husillos múltiples CNC (9)
- Tornos de plato horizontal (52)
- Tornos de plato horizontal CNC (25)
- Tornos de precisión (5)
- Tornos de puntas (4)
- Tornos de refrentar (16)
- Tornos de refrentar con contrapunto (4)
- Tornos de retornear (5)
- Tornos de roscado exterior (2)
- Tornos especiales (2)
- Tornos horizontales (4)
- Tornos para mecánicos (25)
- Tornos pesados (26)
- Tornos revólver (5)
- Tornos universales (28)
- Tornos universales de Ø más de 800 mm (9)
- Tornos universales hasta Ø 800 mm (10)
- Tornos verticales (79)
- Tornos verticales (con plato horizontal) de un o dos montantes (2)
- Tornos verticales con husillo roscado autocargador (3)
- Tornos y tornos automáticos (4)
- Tronzadoras (9)
- más
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AFM (3)
- AI (2)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (1)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (7)
- BERG (1)
- Bernardo (20)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (24)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (15)
- BOEHRINGER MAZA (1)
- BOEHRINGER VDF (1)
- BOLEY (9)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (4)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- CAORLE (1)
- CARNAGHI (1)
- CATALANO (1)
- CAZENEUVE (34)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- CEM (1)
- CHALLENGER (1)
- Chevalier (4)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- Chiron (2)
- CHOCIANÓW (1)
- CHOLET (1)
- CINCINNATI (1)
- CINCINNATI-MILACRON (1)
- CINNCINATI (1)
- Citizen (28)
- CITIZEN CINCOM (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (15)
- CNC GORBREX (5)
- Colchester (64)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (16)
- DAEWOO (DOOSAN) (1)
- DAINICHI (1)
- DANOBAT (1)
- DANTRUCK (1)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- Diedesheim (2)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
usado
Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders. ... más información
Año de construcción: 2007
usado
Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h. ... más información
Año de construcción: 2009
usado
X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.
Año de construcción: 1999
usado
There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. ... más información
Año de construcción: 2002
usado
X-travel: 680mm, z-travel: 200mm, max. chuck diameter: 250mm, max. swing: 260mm, connected load: 55kW, weight: 8t. ... más información
Año de construcción: 2001
usado
turning diameter: 200 mmturning length: mmcontrol: Siemens 840 D total power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 6,0 x 3,0 x 2,5 m- Main and sub spindle- two turrets- Y axis in the upper turret- C-axis main and sub spindle- Tool driveTurning diameter: max. 200 mmSwing diameter: 240 mmControl: 840D SiemensDistance between spindles: 800 mmMain spindle:Speed range - main spindle 25 - 5,000 min/-1Drive power - main spindle 28 / 21 kWMax. torque 320 NmC axis 0.025°Standard chuck size 200 mmChuck diameter 200 mmSpindle bearing diameter 120 mmSpindle bore 79mmmax. bar diameter 65 mmCounter spindle:Speed range - counter spindle 31 - 6,300 min/-1Drive power - counter spindle 18 / 14 kWMax. torque 173 NmC axis 0.025°Standard chuck size 200 mmChuck diameter 200 mmSpindle bore 56 mmmax. rod diameter 42 mmTravel distance of counter spindle 600 mmTool turr ...
Año de construcción: 1998
usado
Año de construcción: 2006
usado
turning diameter: 600 mmturning length: 1250 mmcontrol: SIEMENS 840 D swing over bed: 600 mmswing diameter over slide rest: 410 mmspindle bore: 90 mmspindle turning speed range: 25 - 3000 U/minface stroke: 320 mmlongitudinal stroke: 1250 mmtailstock quill taper MT: 5 tailstock quill stroke: 50 mmmain drive motor: 18 kWtotal connected load: 42 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 4,0 x 2,1 x 1,8 m 2-axis CNC control SIEMENS SINUMERIK 840D with ShopTurn 8-position turret (25x25) 3-jaw power chuck SCHUNK ROTA THW plus 260-81 Tailstock Coolant device Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Año de construcción: 2005
usado
There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.
Año de construcción: 1971
usado
turning diameter over bed: 800 mmturning diameter over slide rest: 500 mmturning length: 6000 mmtotal power requirement: 40 kWweight of the machine ca.: tdimensions of the machine ca.: m 3-jaw chuck D.R.O. Multifix toolholder Rapid traverse Steady-restThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usado
There are ten Automatic Lathes Hahn & Kolb DM 127 available, five more machines are available as spare parts donors, documentation, spare parts and accessories available, have been regularly serviced, inspection is possible. ... más información
Año de construcción: 2009
usado
Swing over bed/ slide: 400/ 190mm, center height: 220mm, center distance: 1000mm, bed width: 330mm, with documentation. ... más información
Año de construcción: 1987
usado
Año de construcción: 1977
usado
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... más información
Año de construcción: 1972
usado
Año de construcción: 1996
usado
Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. ... más información
Año de construcción: 2004
usado
The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.