subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Article: CNC LatheManufacturer: SpinnerType: SB-CNCYear of construction: currently not known, estimated 1990Control: SIEMENS SINUMERIK 810TBar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?Tool turret: Manufacturer SauterMachine has processed plasticThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
There are three identical machines available, x-travel: 850mm, z-travel: 160mm, max. workpiece length/ diameter: 80/ 130mm, max. chuck diameter: 160mm, connected load: 48kW, controls: SIEMENS 840D, weight: 9.6t, including one headstock, one of the machines is missing the control cabinet. ... más información
Article: CNC LatheManufacturer: SpinnerType: BK-CNCYear of construction: currently not known, estimated 1990Control: SIEMENS SINUMERIK 810TBar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?Tool turret: Manufacturer SauterMachine has processed plasticThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Turning length: 250mm, center height: 240mm, swing/ over slide: 280/ 185mm, operational hours counter: 55,325h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información
Article: Hand-, Cycle- and CNC-Lathe Manufacturer: DMT KernType: CD480Control: HaidenhainYear of construction: 2000Machine has processed plasticLead screw and/or lock case must be overhauledSale without tool holder!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información
Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. ... más información
The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... más información
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
Length: 2580mm, width: 2115mm, height: 1780mm, weight: 2.6t, with accessories, documentation and Bar Loader FMB turbo ET 420, there is another identical machine available as a source for spare parts. ... más información
Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. ... más información
A Benzinger high-precision CNC lathe is available. Travel X/Y: 370mm/250mm, feed force X/Y: 3500N, rapid traverse X/Y: 45m/min, speed: 6000rpm, spindle diameter: 26mm, tool positions: 8, control: Sinumerik 840DSL. Dimensions X/Y/Z: approx. 2000mm/1650mm/2050mm, weight: approx. 3500kg. Documentation available.
A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. ... más información
There are 4 identical Takamaz X180 CNC lathes available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg. ... más información
Swing over bed/ plane: 600/ 420mm, max. turning length: 829mm, quill stroke: 120mm, weight: 9.6t, including chip conveyor, machine needs overhauling. ... más información