Fabricante:
(Categoría: 103)
The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / m ...
The FU 251 universal milling machine was built in 1983. The machine is equipped with a table with dimensions (L x W) 1120 x 250 mm. The mechanical feeds of the working table in the X / Y / Z axis are respectively 765/230/390 mm, and manual feeds are 785/250/410 mm. The milling machine has three T-slots with a spacing of 14 mm and a steady rest. The total weight of the machine is 2 tons. Technical data of the universal milling machine FU 251 - working dimensions of the table (length x width): 1120x250 mm - mechanical table feeds in the X / Y / Z axis: 765/230/390 mm - manual table feeds in the X / Y / Z axis: 785/250/410 mm - accelerated longitudinal and transverse feed: 2500 mm / min - accelerated vertical feed: 1040 mm / min - longitudinal and transverse feed speed range: 12.5-630 mm / min, - vertical feed speed range: 5.2-262 mm / min - speed range of the longitudinal and ...
The CNC milling center HWACHEON VESTA 1050B 8K was manufactured in 2013. Technical parameters of the HWACHEON VESTA 1050B 8K milling center – CNC control: FANUC Series Oi-MD – table size: 1150×600 mm – X / Y / Z axis movement range: 1000/600/600 mm – maximum table load: 1000 kg – spindle speed: 8000 rpm – spindle power: 18.5 / 15 kW – spindle torque: 481/293 Nm – feed speed: 1-10000 mm / min – cone: BT-40 (BT-50) – number of tools: 24 – coolant tank capacity: 340 l – machine weight: 7200 kg – machining time: 14861 h Equipment of the HWACHEON VESTA 1050B 8K machining center – cooling through the spindle – chip conveyor – probes – cone BT-40
Cross table Drilling Milling machine SYDERIC S 120 UB Spindle: Ø 55 mm Cone: SA30 Spindle exit: 130 mm Spindle speed: from 125 to 2150 RPM Table size: Length 500 mm x Width 310 mm Table travel: X: 400 mm / Y: 230 mm Maxi distance spindle nose/table: 350 mm Throat depth: 210 mm Motor: 1 CV Manual descent of spindle Column rotation: 360° Accessories: Delivered with 1 small vise + 3 cones SA30/CM2 Voltage: 380 V Width: 1000 mm Depth: 1200 mm Total height in height position: 1800 mm Weight approx 700 kg
Universal Milling Machine HURON NU5 Travel X : 1300 mm Travel Y : 700 mm Travel Z : 500 mm Spindle: SA 40 Table size: 1635 mm x 460 mm Spindle speed: from 30 to 2066 RPM Spindle motor: 8,8 kW Scale 3 axes HEIDENHAIN Auto Feeds X - Y - Z Speed variator Lubricant pump Voltage: 380 V Width with end tables: 2700 mm / without end tables: 1700 mm Depth: 2200 mm Total height: 2000 mm Weight: 3,2 T
CNC Milling Machine MAHO MH 1200W Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm CNC: PHILIPS CNC 532 Year of construction: 1993 Working hours: 34 000 hours Horizontal + vertical spindle Cone ISO 40 Spindle speed: from 20 to 4000 RPM Table size: Ø 1000 mm x 800 mm Rotative table AXE B - 360 000 points Max weight on table: 1000 kg Vertical sleeve travel: 80 mm Swivel head Programmable feeds X/Y/Z - 1 to 3000 mm/min Rapid movement X/Y/Z - 8 meter/min. Central lubrication Lubricant tank Voltage:: 380 V Dimensions (L x W x H): 3200 x 3200 x 2400 mm Weight: approx 9 T
Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight approx 9 T ... más información
Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T
Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T
Notching cutter Graule type AKF4/250 Specifications: • For window and door profiles made of aluminium and PVC • Milling spindle length (mm) 90 • Cutter diameter max. (mm) 250 • Milling depth up to (mm) 80 • Milling width (mm) 330 ... más información
Maho MH 500 W3 - CNC tool milling machine - Maho CNC 332 CNC control - new LCD display - incl. instruction manual & documents - Built in 1989 Specification Workspace: - X-axis: 500 mm - Y-axis: 380 mm - Z-axis: 350 mm Workroom: - Clamping surface: 254 x 354 mm - Number of guide grooves: 1 Working spindle: - Tool holder: ISO40 - Quill stroke: 50 mm Speeds & Feeds: - Working spindle speeds infinitely variable: 20 - 5000 rpm - Feed range X, Y & Z axes: 1 - 2000 mm/min Rapid traverse: - X & Z axes: 4 m/min - Y-axis: 2 m/min Electrical equipment: - Voltage: 400 V - Total connected load: 19 kVA CNC Control: - Resolution of linear displacement measuring systems: 0.001 mm - Readings: Screen - Number of axes controlled at the same time: 2 - Number of sequentially controlled axes: 3 Weight & Space Requirements: - Dimensions WxHxD: 2235 x 1943 x 2375 mm - Weigh ...
- Well-maintained collector's item with lots of accessories and tools - Lid bumper head - Swivel angle table -Vice - Workspace lighting - Tool table Specification Travel: - X-axis: 250 mm - Y-axis: 150 mm - Z-axis: 340 mm Table: - Clamping surface: 600 x 260/200 mm - T-slots: 5 - T-slot width: 12 mm - Table rotation range: ± 30° - Table swivel range: ± 30° - Vise wingspan: 105 mm Spindle: - Spindle speed: 20 - 2000 rpm - Vertical speed range: 60 - 1200 rpm - Horizontal speed range: 95 - 1900 rpm - Speed levels: 12 - Feed range: 8.5 - 475 mm/min - Feed stages: 10 - Spindle mount: MK4 - Quill stroke vertical: 65 mm - Milling head swivel range: ± 90° Machine data: - Motor power: 1.4 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 9000 x 1700 x 1150 mm - Machine weight: approx. 800 kg
Microcut Challenger MCV-2418 - CNC Machining Center - Fagor 0i-mc CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters Btl9ijraac - Year of construction 2005 Specification - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverses: 24 m/min - Speed working spindle: 8000 rpm - Tool holder: BT40 - Table size : 762 x 363 mm - Table load max.: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg
System 3R WorkPalCompact - Pneumatic pallet changer For the automatic change of pallets in chucks on machine tables of milling machines, wire EDM machines, laser machines or grinding machines.Specification - currently configured for 12-pallet System 3R MacroMagnum (Ø 160 mm) - Version with turbo function for chucks - Footprint approx. 1200 x 1200 mm
Pinnacle LV117 - CNC Machining Center - Heidenhain iTNC530 CNC control - Tool changer with 30 places - Additional tank for internal spindle cooling (20 bar) 580 liters - Paper tape filter - Year of construction 2012 Specification Table: - Table size: 1300 x 700 mm - Travel ranges X/Y/Z: 1140 x 710 x 610 mm - Max. table load: 1000 kg - Spindle nose to table surface: 110 - 720 mm - T-slot width/spacing/number: 18 mm / 125 mm / 5 Spindle: - Tool holder: ISO40 - Spindle diameter: 70 mm - Distance between spindle centre and column: 760 mm - Spindle speed: 40 - 8000 rpm - Main motor: 7.5 kW Feed: - Rapid traverses X/Y/Z: 24 / 24 / 24 m/min - Feed speed X/Y/Z: 10000 mm/min ISO40 Automatic Tool Changer: - ATC Type: DISK - Cam type: DAUL ARM - Tool selection (bidirectional): random - Tool positions: 30 - Max. tool diameter: 90 mm - Max. tool length/weight: 250 mm ...
TOS-OSO FNK 2R - Tool milling machine Description- Heidenhain PT 855 position indicator - Infinitely variable speed adjustment - pneumatic tool clamp - Coolant device - Task lighting -Vice - incl. instruction manual & documents - Year of construction 2006 Specification - Table dimensions: 250 x 1100 mm - T-slots number x spacing: 4x 50 mm - Middle groove width: 14 mm H8 - Width of additional grooves: 14 mm - Max. permissible table load: 200 kg - Manual table work stroke lengthwise/crosswise/vertically: 840 / 376 / 460 mm - Motorized table work stroke longitudinal/transverse/vertical: 820 / 355 / 440 mm - Number of feed stages: infinitely variable - Feed range long/cross: 28 - 630 mm/min - Feed range vertical (reduction 1:3.3): 8.5 - 196 mm/min - Rapid feed longitudinal/transverse: 1500 mm/min - Rapid feed vertical (reduction 1:3.3): 450 mm/min - Distance from sp ...
FPT Industrie TESSEN EVO - Travelling column milling machine - Heidenhain TNC640 CNC control - portable electronic handwheel HR520 - Manual docking of the frog head to the machine - Universal head with 0.001° pitch - Static RTCP in the room - Tapping without compensating chuck for mechanical milling heads - Collision monitoring sensor - 2 tool magazines of 40 positions each ISO 50 - 2 posts for loading and unloading tools in the magazine - Wireless touch probe - Internal and external coolant supply (LEIU-LEU) - Internal compressed air supply - Pendulum machining with a partition wall - Full enclosure with roof - Workspace lighting - Bed flushing - Chip conveyor with ejection on the right side - Programmable adaptive control - Teleservice (remote diagnosis) - GREEN MODE function to optimize the energy consumption of the machine - FPT Standard Paint -Magnetic - NC ...
Deckel FP2 Milling Machine Power: 2.2 kW RPM: 40-2000 Inner taper: ISA 40 Clamping surface: 830x240 Heidenhain Digital Display Machine is in a very neat condition and can be viewed under power. ... más información
SHW UFZ 5 S with tool robot for 60 tools. X 4000, Y 1100, Z 1100, spindle 6000 rpm, round table Dm 1250, pitch 360000, also with horizontal dividing head with steady, pitch 3600000, internal cooling 16bar. Very few operating hours. Condition: excellent (used) ... más información
- X: 300 mm - Y: 160 mm - Z: 340 mm - Speed range: 40 - 2000 rpm - Clamping surface: 600 x 210 mm - Spindle mount: SK 40 - Control: TNC 113 digital display - Total power: 1.5 / 1.9 kW - Machine weight: 1050 kg - Space requirements (W x D x H): 1.2 x 1.0 x 1.9 m - Condition: good Details rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head can be moved to spindle block 100 mm Accessories Machine feet, documentation, counter holder, no other accessories