fresadoras usadas para la venta

The FU 251 universal milling machine was built in 1983. The machine is equipped with a table with dimensions (L x W) 1120 x 250 mm. The mechanical feeds of the working table in the X / Y / Z axis are respectively 765/230/390 mm, and manual feeds are 785/250/410 mm. The milling machine has three T-slots with a spacing of 14 mm and a steady rest. The total weight of the machine is 2 tons. Technical data of the universal milling machine FU 251 - working dimensions of the table (length x width): 1120x250 mm - mechanical table feeds in the X / Y / Z axis: 765/230/390 mm - manual table feeds in the X / Y / Z axis: 785/250/410 mm - accelerated longitudinal and transverse feed: 2500 mm / min - accelerated vertical feed: 1040 mm / min - longitudinal and transverse feed speed range: 12.5-630 mm / min, - vertical feed speed range: 5.2-262 mm / min - speed range of the longitudinal and  ...

Transverse slide milling machine with digital display , used milling m/c with vertical head and DRO, used Hersteller/make: HECKERT Typ / model: FQW 400 Baujahr/ year: 1983 Tischgrösse/ table: 400 x 1600 mm Tool holder/ taper: ISO 50 max. table load: 1500 kg Verfahrweg längs / move longit.: 200 ... 1400 mm Verfahrweg quer/ move cross: 55 ... 505 mm Verfahrweg perject / move vertic.: 100 ... 525 mm Spindle speeds: 45 ... 2240 rpm in 18 steps Drive power of the milling spindle | load of spindle: 15 kW Connected load: 21 kW Masse/ weight: 4000 kg

x-travel: 2500 mmy-travel: 750 mmz-travel: 1000 mmtable surface area: 2550 x 800 mmspindle taper: SK 50 control: HEIDENHAIN, TNC 150 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 1400 mmy-travel: 630 mmz-travel: 500 mmgear width: 60 mmspindle cone: SK 50 table surface area: 1800 x 500 mmtable load: 2 tvoltage: 380 Vfrequency: 50 Hztotal power requirement: 32 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 4,2 x 5,2 x 2,35 mincl. scrap conveyor, new control panel with TFT monitor, CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

2 pcs universal consol framing machine CSEPEL MU5, table 1600 / 500 mm, 1190 / 650 / 470 mm, Bosch Alpha 3/3  ... más información

x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtool taper: ISO 40 spindle turning speed range: 40 - 2000 U/mintable-size: 700 x 280 mmsurface area: 830 x 224 mmtotal power requirement: 2,2 kWdimensions of the machine ca.: 1,4 x 2,1 x 2,0 mControl: Heidenhain TNC 145 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 500 mmz-travel: 450 mmtable surface area: 900 x 500 mmspindle stroke: 100 mmtool taper: ISO 40 turning speed range: 20 - 3150 U/minfeeds - cross: 1 - 3000 mm/minfeeds - longitudinal: 1 - 3000 mm/minfeed power in the axis x + z: 8.000 Nfeed power in the axis y: 24.000 Nrapid traverse in the axis x + y: 6 m/minrapid traverse in axis z: 11,4 m/mintotal power requirement: 40 kVAweight of the machine ca.: 3,3 tdimensions of the machine ca.: 3,8 x 3,6 x 2,2 melectrics - voltage/frequency: 380 / 50 V/HzCNC Control: Maho CNC 432 Continous Path Control Philips CNC 432The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Niles brand german mali borverk bench x : 1600 mm y : 1600 mm z : 1800 mm Turntable works flawlessly. gear sets bronze nut all maintenance is done. It has an opening mirror. counter bed is available. The opposite bed was sandblasted and painted for cleaning. it is well maintained. There is no non-working place in the electrical unit. the machine is about 20 tons 11 tons of material was processed on the table before. By producing the apparatus, it can be processed with a chuck that opens pipes up to q 1800 mm diameter. gasket surface can be opened to flanges.

Machine type: Tool milling machine Manufacturer: DECKEL Model: FP 1 Active 3-Axis Year of construction: 1984 Condition: very good Type of offer: used machine Specifications: Table: 600 x 210 mm Speed range: 40 - 2000 rpm. Spindle mount: SK 40 Travel range: x = 300 mm y = 160 mm z = 340 mm Propulsion: 1.6 / 2.0 kW Remark: Heidenhain TNC 113, 3-axis active digital display, Safety cabin with electrical shut-off, coolant device, Machine vice with turntable 110 mm jaw width, Collet chuck SK 40 with 13 collets 5 - 25 mm, 5 tool holders SK 40, infinitely variable feed control and rapid traverse in x, y, z Weight: 850 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.

No. 1909: 1 gebr. Universal milling machine Fabr. HURON, type MU-55, Bauj. 1984 with 3-axis active digital display TNC-114 Arb.-Ber.: 1300 x 1000 x 550 mm, drive power: 9 kW Accessories: Table clamping surface 1635 x 700 mm, coolant device, Universal milling head infinitely adjustable feeds via DC drive Other: Speed range 30-2060 rpm Spindle holder SK-40 Space requirement approx. 3.5 x 4.5 x 1.75 m, weight approx. 4.8 tons.

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition

x-travel: 420 mmy-travel: 200 mmz-travel: 330 mmspindle taper: SK 40 table load: 200 kgcarrier height until: 16: 11,2 - 355 mm/min.spindle turning speed range: 16: 56 - 1800 U/mintable surface area: 710 x 315 mmDimensions (L/W/H): 1,6 x 1,3 x 2 mtotal power requirement: 2,2 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,6 x 1,3 x 2 mCondition: ready for operation: Electric 380 Volt: 3-axis digital readout: Fagor Cooling pump in machine base: Machinefeets: Additional adjustment of the traverse increases the working area of the machine! Ball screws in the x + y axis, automatic feeds in all 3 directions.Dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 510 mmy-travel: 450 mmz-travel: 410 mmtable-size: 800 x 390 mmspindle taper ISO: 40 turning speed range - vertical: 50 - 2500 U/minquill stroke: 80 mmspindle drive: 3 KWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 1,6 x 1,6 x 1,95 mNC tool milling machine- Heidenhain TNC 114B- hydr. Tool clamping- Machine light- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 1000 mmz-travel: 800 mmControl: Heidenhain TNC 155table surface area: 3200x1000 mmnumber of T-slots: 9 0: 100 mmT-slot - width: 22 mmmilling-head swivable +/-: 180 °spindle motor: 30 kWturning speeds: 20-2500 U/minFeed: 2-6000 mm/mintotal power requirement: 38,5 kWweight of the machine ca.: 16,500 tdimensions of the machine ca.: 7,5x3,55x3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 13500 mmy-travel: 6500 mmz-travel: 1500 mmw-axis: 6000 mmtable-size: 18000 x 4500 mmdistance between columns: 5200 mmworkpiece weight: 300 tspindle turning speed range: 4 - 600 U/minspindle taper ISO: ISO 60 spindle motor: 62,5 (x2) kWfeeds x/y/z -stepless: 1- 10000 / 3000 mm/minControl: Siemens 840D PL ram diameter: 700 x 700 mmtotal power requirement: - KVAweight of the machine ca.: - tdimensions of the machine ca.: - mModernization in 11/2014- CNC control Siemens 840 D pl- Coolant system- 5 headsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6600 mmy-travel: 3200 mmz-travel: 1000 mmw-axis: 1750 mmControl: Siemens 840 D column daylight: 2650 mmdistance spindle nose and table: 2500 mmtable surface area: 6400 x 2250 mmtable load: 50 ttool taper: ISO 60 spindle turning speed range: 5 - 2000 U/mintable feed: 10 - 15000 mm/minfeeds crossrail-slide horizontal: 10 - 10000 mm/minfeed: (W) 10 - 2000 mm/minspindle motor: 55 kWtotal power requirement: 85 kWweight of the machine ca.: 125 tdimensions of the machine ca.: 18 x 9,5 x 6,5 mMachine general overhauled and equipped with SIEMENS 840 D control in 2003- new digital motors, drive controllers, measuring systems and switch cabinet- tool changer for 60 tools (45 ISO 50, 15 ISO 60)- 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90 deg.indexing- hydrostatic table guideways- adjustable crossrail- 2 tables coupled- chip conveyor- coolant deviceMachine can be  ...

Waldrich Siegen brand X = 8000, Y = 1800, Z = 1800mm. Our 6-axis double column machine, including Q, W, V, has a Siemens 840C CNC unit and it is active. It was imported to our company from France in 2014 and was used very little in our country. The bench has both a vertical and a side working head and an angle head that can be attached manually separately.

Travels: 1200mm/700mm/650mm, table dimensions X/Y: 1550mm/650mm, torque: 410Nm, control: Heidenhain 426. On-site inspection is possible. ... más información