Fabricante:
(Categoría: 103)
- X: 760 mm - Y: 530 mm - Z: 560 mm - Table size: 1200 x 500 mm - Speed range: 12,000 rpm - Spindle mount: SK 40 - IKZ: 20 bar - WZ changer: 30 times - electr. Handwheel: yes - Chip conveyor: yes - Control: Siemens 828 D - Suction: yes - Operating hours: 17,500 h - Total power: 25 kW - Machine weight: 8 kg - Space requirement (W x D x H): 2.4 × 2.0 × 2.8 m - Condition: good, little run Details 4th axis, swivel table Accessories Documentation, no other accessories
Nice machine, but parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, electrical parts, control panel, ... or to convert to new control ! ... más información
Machine : Gear Hob 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 M 3.75 M 2 M 4 M 2.25 M 4.5 M 2.5 M 5 M 2.75 M 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20 degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30 degrees, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90%
Travel: X - Travel 750 mm Y - Travel 400 mm Z - Travel 500 mm Table 320 x 1270 mm Speeds 3800 rpm ... más información
Workspace: Travel in X/Y/Z 300/200/350 mm Distance spindle nose table 80 – 430 mm Rapid traverse 1200 mm/min Working feed X/Y/Z manual 50-550 rpm Feed force in X/Y/Z manual kN Clamping surface (rigid angle table) 600 x 200 mm Max. table load (rigid angle table) 50 kg Vertical milling head: Speed range 80-2200 rpm Power 1.4 kW Tool holder SK30 Dimensions: Length x width x height 1150 x 1410 x 1550 mm Weight approx. 500 kg
Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Tool Changer Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ... ... más información
Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Tool Changer Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ... ... más información
Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
4 Spindle High Speed Train Milling Machine, Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw
X-travel: 500mm, y-travel: 400mm, z-travel: 350mm, table dimensions: 550x450mm, max. rotational speed: 45,000/min, controls: Andronic 400, length: 2800mm, width: 2200mm, height: 2400mm, weight: 4.35t, including documentation, tool cones and clamping collets, machine is not functional, one servo-control element is defective.
CONTROLS CNC controls SELCA 3045 P WORKING RANGE -CUBIC- X-axis travel: 370 mm Y-axis travel: 230 mm Z-axis travel: 270 mmSPINDLE / HEAD spindle revolutions (max): 22000 /minAXIS DRIVES rapid traverse: 5000 mm/minTOOL MAGAZINE number of positions: 9 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1900 mm space requirements -front/back-: 2400 mm total height: 1950 mm total weight approx.: 2400 kg
Rapid traverse: 3000mm/min, connected load: 12.5kVA, length: 2300mm, width: 2500mm, weight: 1.83t, the display is defective and the z-axis needs overhauling. ... más información
X-travel: 300mm, y-travel: 150mm, z-travel: 250mm, U-travel: 1500mm, V-travel: 1060mm, W-travel: 900mm, table dimensions: 1000x32000mm, max. load: 4t, rotational speed: 40-4000/min, weight: 20t, including documentation, spindle cabinet and spindle. ... más información
X-travel: 900mm, y-travel: 300mm, z-travel: 380mm, rotational speed: 28-2800/min, feed rate: 10-630mm/min, connected load: 5.8kW, weight: 1.7t, with dividing head, counter spindle, holders, spare parts, various tools, an inspection is possible. ... más información
Control: Deckel Dialog 11, with vice, an inspection is possible. ... más información
X-travel: 800mm, y-travel: 450mm, z-travel: 500mm, quill stroke: 80mm, rotational speed: 63-3150/min, length: 4500mm, width: 3800mm, height: 2030mm, weight: 3.8t, operational hours counter: 2538h, including accessories and documentation, was maintained regularly. ... más información