sierras usadas para la venta

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

 ... más información

ELUMATEC SA 142/35 automatic circular sawing machine was built in 2001 in Germany. This extremely powerful machine is used for the precise and fully automatic cutting of aluminium and PVC joinery. The workpieces are fed into the workspace on roller conveyors with a option of single, double or triple feeding by means of a special switch. Material infeed is also supported by clamping cylinders, which ensures that the process runs safely and without any interruptions. The material is then cut into the large work space by a reliable circular saw with the option to freely adjust the cutting angle from 90° to 45°. The ELUMATEC aluminium profile sawing machine has so far only been used for cutting aluminium profiles. The total weight of the machine is 770 kg. Technical specifications of the ELUMATEC SA 142/35 aluminium sawing machine - cutting angle: 90° to 45° - maximum cutting uni ...

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of selecting single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

Saw blade diameter: 550mm, max. cutting length: 4000mm, inclination of the cutting head: up to 30° for angled cuts. Dimensions X/Y/Z: approx. 9000mm/6000mm/1300mm, weight: approx. 1600kg. ... más información

Main functions: Precision cutting of profiles at various angles. Operating pressure: max. 1MPa, air consumption: 28l/cycle, weight: approx. 2150kg. ... más información

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Wheel diameter: 680 mmsawblade length: 8550 mmSawblade width max.: 1,3 mmCutting height: mmMotor output: 20 kWTable dimensions: 600 x 620 mmFeed speed: m/min.Machine height: mmWeight: 10.000 kgBandsaw horizontal, Precision-Saw for Silicon (Solar industry)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmcapacity 90 degrees: flat: 320 x 200 mmcapacity 45 degrees: flat: 210 x 200 mmcapacity 45 degrees: round: 230 mmcapacity 45 degrees: square: 210 x 210 mmcapacity 60 degrees: round: 150 mmcapacity 60 degrees: flat: 160 x 140 mmsaw band length: 3.150 x 27 x 0,9 mmvice: 325 mmcutting speed: 40 / 80 m/mintotal power requirement: 1,5 / 1,8 kWweight: 770 kg- in checked condition - machine video -https://www.youtube.com/watch?v=rNq7IdmbXz4Equipment:- electro-hydraulic band saw - semi-automatic- with microprocessor control, pivotable- miter cuts 45° right to 60° left double miter band saw- saw cycle semi-automatic, sequence: automatic vice clamping saw cut saw bow moves up vice opening- pneumatic material clamping- hydraulic band clamping device including pressure gauge- machine base frame with coolant device- forklift/pallet truck pockets for easy maneuvering- operatin ...

miter: ja weight of the machine ca.: 370 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Semi-automatic Double-sided miter Capacity 240 x 280 mm ... más información

Machine Type: NC Circular Saw Machine Manufacturer: Behringer Eisele Type: VA-2-NC-HM Year of construction: 2002 Condition: used / currently Hydraulics defective Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-BEH-1123 DESCRIPTION We offer you a used NC circular sawing machine from the manufacturer Behringer Eisele. Technical data will follow. - Roller conveyor feed and discharge side - Chip conveyors and chip trolleys - 12 saw blades / mostly new -Operating instructions Can be repaired if necessary. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and condition ...

Saw blade diameter: 500 mm profile height: 250 mm profile width: 400 mm jack height: 215 mm jack depth: 185 mm Material stop swivel between 22.5° and 157.5° Jack height can be adjusted by motor with digital display Motor adjustment of the angles with digital display Depth stop motor adjustable with digital display Automatic sawing sequence via control with preselection of the cutting angles Pneumatic material clamps Coolant lubrication

Offer 23397 Specifications: - Saw blade diameter up to 350 mm - 2 saw blade spindle speeds 22 + 44 rpm - Mitre adjustable left + right up to 45 ° - Cutting range at 90° - round tube 115 mm - Square tube 105 x 105 mm - Solid material (saw blade 350mm) 60 mm - Flat profile 140 x 80 mm - Cutting range at 45° - round tube 115 mm - Square tube 90 x 90 mm - Pneumatic material clamping vices - Coolant device - Dimensional fence 1500 mm - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 2.2 kW - Space requirement approx. W 600 x H 1400 x D 900 mm - Weight approx. 300 kg

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 255 control system Cutting range at 90°: 195 x 120 mm Cutting range at 45°: 135 x 120 mm Minimum Quantity Spraying Device Pneumatic material clamps Mitre cuts possible on both sides 2-hand operation

Description: Dual-tube cutting machine DCH70M with deburrer BEWO DB 70 No. 0212157 Specifications: - Workable diameter: 12 - 70 mm - Range of workable lengths: 35 - 2000 mm - Range of brushable lengths: 140 - 2000 mm - Rated power of cutting unit: 5.5 kW - Range of cutting unit speed: 20 -120 m/min Equipment: - Bar loader with beam magazine with 5 guides - Air-channelized tube cleaning system - User and maintenance manual - CE conformity Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 4600x2300mm - 2200 Kg Cutting unit: 4500x1300mm - 2800 Kgweight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 14,700 x 2,300 x 1,800 mm

Description Universal cold circular saw machine from eisele brand suitable for small and large series Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown Technical data -Saw blade diameter: 450 mm -Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown -Drive: 3/3.6 kW -with: coolant device -Cutting range at 90 degrees Round: 145 mm -Cutting range at 90 degrees square: 130 mm -Cutting range at 90 degrees flat: 240 x 70 mm -Cutting range at 45 degrees Round: 145 mm -Cutting range at 45 degrees square: 125 mm -Cutting range at 45 degrees flat: 170 x 70 mm -Cutting range at 30 degrees Round: 120 mm -Cutting range at 30 degrees flat: 120 x 70 mm -Profile size: max. 320 x 30/280 x 80 mm -Dimensions:  ...

Description: Voltage 380 volts, saw blade diameter 370 mm, roller conveyor right, with stop, length approx. 2030 mm, roller conveyor left, length approx. 3170 mm, with additional saw blades and protective wall, on wheels, without documentation and CE certificateApprox. Onsite Dimension. (l x w x h): 6,800 x 1,300 x 1,900 mm, weight approx.: 800 kg