Fabricante:
(Categoria: 107)
Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible.
Working width: 2040mm, max. sheet thickness: 4mm, weight: 1.8t, an inspection is possible. ... mais informação
max. ram stroke:220 mmtotal power requirement:1,5 kWweight of the machine ca.:880 kgdimensions of the machine ca.:1.500 x 1.000 x 2.200 mmslot-milling length:220 mmtoolhead swivelling: +/- 10° ° Gradtable::650 x 250 mmtable adjustment: vertical:360 °mmtable adjustment: quer/längs: 170/400 °mmstrokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step
Article: Wide belt sanding machineManufacturer: CostaType: MD4 - CV 1150Year of construction: 2024Deburring machine with wide belt sanding unit and brush unit for metal processing e.g. after laser cutting, new & in stockEffect. Working width: 1,150 mmWorkpiece thickness, nominal: 0.8 to 150 mmFeed table with feed carpet,infinitely variable feed speed: 0.5 - 10 m/min1st work unit C20 wide belt sanding:Sanding belt length 2,200mmGrit set for electronic fine positioning of the contact roller, adjustment (0.01 mm)Frequency-controlled drive motors for adjusting the sanding belt speedMotor power: 11 kW2nd working unit XVS-130 with brushes D130mm incl. COSTA-LockMain motor with frequency converterBuilt-in options:Schneider HMI-Vision - PLC controlRemote maintenance moduleDevice for forklift loadingDust suction collectorVacuum fan installed on machine stand;Vacuum fan 7.5kWEnlarged path of the e ...
Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible. ... mais informação
max. ram stroke:220 mmtotal power requirement:1,5 kWweight of the machine ca.:880 kgdimensions of the machine ca.:1.500 x 1.000 x 2.200 mmslot-milling length:220 mmtoolhead swivelling: +/- 10° ° Gradtable::650 x 250 mmtable adjustment: vertical:360 °mmtable adjustment: quer/längs: 170/400 °mmstrokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step
Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible. ... mais informação
Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.
band width:1050 mmplate thickness:8 mmnumber of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mmFEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mmLEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/minELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 HzTechnical description :Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of:- LAWECO COIL LO ...
Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.
Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm ... mais informação
There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm. ... mais informação
There are 3x punch rivet feeders and 2x C-pliers Böllhoff available. Self-pierce rivet feeder: 2x ABF, 1x LG, years of construction: 1998-2003, rivets: 3x4mm and 3x5mm. C-tongs: Year of manufacture: 1998, max. rivet setting pressure: 250bar, max. rivet setting force: 50kN. Documentation available. On-site inspection is possible.
Pressing force: 71kN, projection: 610mm, max. stroke length: 220mm, output: 1400E/h, weight: approx. 1300kg. ... mais informação
Max. Sheet thickness: 8mm, max. cutting force: 220kN, laser power: 2700W, C-axis punching: 330rpm, max. stroke rate marking: 2800rpm. Tool rotation: 360°, punching tool size: 76.2mm, max. tool change time: 0.3s, punching/laser part flap size: 500mm x 500mm. Documentation available. ... mais informação
Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.
Several Schlebach machines are available for complete thin sheet processing. 1) Profiling machine Quadro TP without cassettes, infeed width: 300mm-8000mm, control: Schneider Magelis. Including electronic length measurement, motor-driven roller knife for cross-cutting, documentation and spare parts list. 2) Infeed table EZT 12050 RS 10 with pivoting roller cutter (max. +10°). Length measurement min.: 1000mm, speed: 10m/min, infeed width: 1250mm, max. capacity non-ferrous metals/sheet steel/stainless steel sheet: 0.80mm/0.70mm/0.50mm. Documentation available. 3) Decoiler 2/600, max. coil width: 600mm, max. coil weight: 2000kg, max. coil inner diameter: approx. 510mm, max. coil outer diameter: approx. 1500mm. Documentation available. 4) Pair of exchangeable cassettes for Quadro, stations: 12, swivel capability: no, special profiling for non-ferrous metals with 0.5mm thickness. Documentatio ...
Press: Press force: 220kN, max. stroke: punching: 1350/min, marking: 3000/min, working range X/Y (punching): 3050mm/1550mm, max. sheet thickness: 8mm. Laser: Power: 6000W, max. sheet thickness (mild steel): 6mm, max. sheet thickness(stainless steel): 6mm, max. sheet thickness(aluminum): 5mm. Tools and automation: MultiTool change time: 0.3s, number of tools/clamps: 21/4, max. workpiece weight: 280kg. Dimensions X/Y/Z: approx. 7600mm/8200mm/2100mm, weight: approx. 11050kg, operating hours: 28128h. Documentation available.
material width:180 mmcoil weight:0,75 tmaterial thickness:2,0 - 6,0 mmcoil external diameter:400 - 1250 mmno. of straightening rolls:5 number of draw-in rolls:2 band speed:20 m/minpower requirement:4,0 kWweight:2,8 tdimensions (WxDxH):1,4 x 2,45 x 1,85 msnubber roll:pneumatic ... mais informação
FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 110 mm length min.: 400 mm lenght max.: 1700 mmPRESS FORCES total force (nominal): 40 toSystem consists of:+ WICK handling system, YoM 2012+ ABB IRB 6650S-90/3.9 handling robot, YoM 2012+ MAE M-AH 6 automatic pipe straightening machine, YoM 2012