trabalho de chapa metálica usadas para venda

Straightener, straightener, VEB BLEMA GOTHA UBR 20X1600 / 1-10 sheet rolling machine. Machine for straightening sheets up to 20 mm thick and up to 1600 mm wide. The mill was hardly used because it was the second machine in the plant and served as a spare machine. Currently un-exploited. The machine is undergoing modernization, a completely new control system. The possibility of adapting to the customers needs (extension with roller feeders, receiving, the possibility of sanding rolls and rollers, etc.). Technical data : - year of production: 1983 - sheet thickness: 20 mm - sheet width: 1600 mm - upper straightening rolls: 5 pcs - lower straightening rolls: 6 pcs - rolling speed 10 m / min - engine power: 37 kW - engine power: 2 x 18.5 kW - engine power: 1,1 kW - engine power: 1,1 kW - weight: 39150 kg

I offer hydraulic shears not sheet metal marked NTA 3150/10A manufacturer Strojáreň Piesok. The maximum cutting length is therefore 3150 mm and the strength of the structural steel sheet is 10 mm. Plugged in, fully functional, but so rarely used that its not worth my while to keep them. (they do not fit into our primary production segment) Price negotiable, buyer arranges transport, total weight 14,000 kg Possibility of viewing, testing - at the Chrudim facility

sheet width: 3000 mmplate thickness: 10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

sheet width: 1500 mmplate thickness: 4 mmback stop - adjustable: 10-1000 mmno. of strokes: ca. 20 Hub/mincutting angle: 1 °table height: 850 mmtotal power requirement: 8 kWweight of the machine ca.: 3300 kgdimensions of the machine ca.: 2500x2000x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 3100 mmplate thickness: 6 mmdistance between columns: 3150 mmno. of strokes: 20 - 75 Hub/mincutting angle: 0,5 - 1,25 °down holder: 16 Stückvoltage: 380 Vfrequency: 50 Hzpower capacity: 10 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 4,0 x 2,1 x 1,7 mwith electr. back stop,spare cutter,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mmcoil weight: 250 kgcoil internal dia.: Ø 290-550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

round bar steel: 45 mmsquare edge steel: 40 mmL-beam: 120 x 13 mmflat steel: 500 x 12 mmpunching pressure: 60 tthroat: 510 mm: 500 x 12 oder 400 x 16 mmpunch diameter: 27 in 17 mmpunch diameter: 39 in 12 mmoil volume: 80 ltotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,8 x 0,9 x 1,8 mHydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm².Electric 380 voltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mmplate thickness: 10,00 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTop roller diameter: 195 mmIncludes rollers for rolling flat steelClockwise and anti-clockwise rotation via handheld control unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 250 mmmaterial thickness: 2 mmno. of straightening rolls: 19 weight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

material width: 2500 mmmaterial thickness: 25,00 mmno. of straightening rolls: 7 sheet thickness - min.: 8,00 mmtotal power requirement: kWweight of the machine ca.: 61 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven ...

Used machine in good condition. Available for immediate delivery. - Pressure force: 50 t - Bending length: 2.050 mm - Axes: Y; X; R1; R2; Z - Control: Delem EMA DA 42  ... mais informação

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls. ... mais informação

Used fully automatic copper / nickel cathodes (max. 1200x1200x25 mm) longitudinal and transverse cutting line, incl. vacuum feeding unit, plate feeding device, scissors 1 for shearing strips, pulling device, transport and lifting device, shear 2 for shearing on squares, apron conveyor for part ejection. Scissors each with hold-down device

material width:300 mmcoil weight:0,5 tmaterial thickness:0,4 - 3,0 mmcoil internal diameter:420 - 520 mmcoil external diameter:1200 mmno. of straightening rolls:9 straightening roll diameter:50 mmnumber of draw-in rolls:2 diameter of draw-in rolls:50 mmpower requirement:1,5 kWweight:1,55 tdimensions (WxDxH):2,5 x 1,2 x 1,8 m

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg  ... mais informação

Specifications: - Max. working width 3040 mm - Max. material thickness ST 37 4 mm - Bending process as fully automatic, or - Semi-automatic workflow can be pre-selected - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Max. lifting height of the upper beam 350 mm - Lifting height of the upper beam can be electronically preselected - Adjustability - bending beam 125 mm - The lower beam 125 mm - Upper bolster drive 400 V / 4.0 kW - Bending beam drive 400 V / 5.5 kW - Space requirement approx. W 3950 x H 1600 x D 1200 mm - Weight approx. 4800 kg with: - Footswitch - Bending rails - Backgauge

Specifications: - Max. working width 3040 mm - Max. material thickness ST 37 4 mm - Bending process as fully automatic, or - Semi-automatic workflow can be pre-selected - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Max. lifting height of the upper beam 350 mm - Lifting height of the upper beam can be electronically preselected - Adjustability - bending beam 125 mm - The lower beam 125 mm - Upper bolster drive 400 V / 4.0 kW - Bending beam drive 400 V / 5.5 kW - Space requirement approx. W 3950 x H 1600 x D 1200 mm - Weight approx. 4800 kg with: - Footswitch - Bending rails - Backgauge

Specifications: - Pressure capacity 1000 KN - Stroke infinitely adjustable 10 - 100 mm - Stroke rate 34 - 80 1/min - Projection approx. 510 mm - Installation height approx. 450 mm - Drive 400 V / 15 kW - punches e.B. up to 31 mm Ø in steel 25 mm - with special punch saddle z.B. up to 58 mm Ø in steel 13 mm - e.B. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2400 x D 2300 mm - Weight approx. 3600 kg - with: - Hydr. Low Pressure Grain Detection Device - various punches + matrices - Emergency stop button

Type: XZMP 3150/16 Parameters: 3150 mm, 16 mm Manufacturer: Strojárne Piesok Year of production: 1984 Location: Czech Republic Description: Max. bending length 3150 mm Max. plate thickness 16 mm Min. inner diameter of rounded tube 550 mm Rolling speed 7 mm / min Roller adjustment speed 2x22 mm / min Machine dimensions LxWxH 7900x1930x2500 mm Machine weight 46800 kg