subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 108)
Welding capacity: 504kVA, connected load: 90-125kVA, weight: 588kg, without cooling unit, on-site inspection is possible. ... más información
X-axis: 2520mm, y-axis: 1550mm, z-axis: 300mm, max. sheet thickness: 12mm, control FANUC 160i-L, FANUC Laser C4000, Keller dry separator Vario T 1.5, cooling Riedel. The machine is fully functional and can be inspected on site during operation. ... más información
Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. ... más información
Welding rectifier: A10-355K, welding process: MIG/MAG, power connection: 3-phase, 220/380V, 50 Hz or 220V, 60 Hz, output range: 50A/15V to 355A/29V. Duty cycle: 355A/29V at 20%, 315A/30V at 60%, 280A/28V at 80%, 250A/27V at 100%. Open-circuit voltage: 17-39V, current at 220V: 41A at 50%, 34A at 60%. Current at 380V: 24A at 50%, 20A at 60%, weight: 175kg.
There are 5 welding machines available, some of which are defective. 1) EWM WEGA 400 MIG DW, defective: unknown. 2) MAHE c-MIG 5000 WWK, partially functional, ignition problems. 3) MAGE c-MIG 5000 WWK. 4) MAHE c-MIG 5000 WWK, defective: Error in display. 5) NIMAK CMK 400, all welding machines including water cooling, intermediate hose package and wire feed case. The welding machines are only sold as a package. Individual machines cannot be sold separately.
A used submerged arc welding system from Oerlikon is for sale, which was regularly serviced and fully functional until last year. The system is mounted on a crane rail and has a cross travel arm with a travel distance of 10 meters, which carries a 6.5 meter long boom that can be extended up to 5.5 meters. The system includes four power sources, each with 1,000 amps from Oerlikon/Miller, suitable for tandem welding with two quills, each with a travel distance of 2 meters. It is designed for welding wires with diameters of 2.4 mm, 3.2 mm and 4.0 mm. Although the unit is designed to be rotatable, it is currently stationary due to an attached trolley for welding consumables. Documentation available. On-site inspection is possible.
weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 900 x 400 x 800 mm ... más información
current intensivity: 200 A, weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 500 x 250 x 400 mm ... más información
Description: Please note! Without gas bottlecurrent intensivity: 200 A, weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 900 x 400 x 600 mm ... más información
Description: Serial number: EN60974-1 Attention: without the gas cylinder shown in the photos For all other technical welding data, see photographed type plateweight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 700 x 350 x 700 mm ... más información
Description: Machine number: 6160252 Attention: for all other technical welding data see photographed type plateweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 700 mm ... más información
Description: Incl. transport case and the hose package shown in the photosweight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 500 x 350 x 300 mm ... más información
Description: For all other technical welding data, see photographed rating plateApprox. Onsite Dimension. (l x w x h): 500 x 400 x 500 mm, weight approx.: 50 kg ... más información
Description: Serial number: 3308 Laser power: 4.4 kW Working range: X-axis: 3048 mm Y-axis: 1524 mm Z-axis: 170 mm Max. Load capacity shuttle table: 890 kg Position deviation: +/- 0.1 mm Position spread width: +/- 0.05 mm Positioning speed in X- and Y-axis simultaneously: 113 m/min Max. Axis acceleration: 4.5 m/s² Max. Cutting speed: 50 m/min The machine is equipped with an additional shuttle table and an additional laser head (7.5 inch) Control system: BYSTRONIC Attention: the filter extraction unit possibly shown in the photos is not included in the scope of delivery Incl. tube laser device (rotary axis) Profile holder chuck: 15 - 315 mm Profile feed through the chuck: 15 - 155 mm Max. Profile processing length: 2700 mm Positioning tolerance rotary axis: +/- 0.03° Max. Mass moment of inertia of the profile: 1 kg.m² Tubes up to approx. 150 mm Attention: the machine can be transported ...
Description: Without welding guns With earthing, power plug and welding maskweight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 520 x 750 mm ... más información
Description: With electrode clamp, earthing and high-current plug Mobileweight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 580 x 700 mm ... más información
Description: With electrode welding gun, earthing and high-current plug For further details see picturesweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 950 x 450 x 780 mm ... más información
Offer 24102 Specifications: - Mobile extraction system with articulated extraction arm - Suitable for welding mist extraction when welding - Steel + stainless steel + aluminium + unalloyed or galvanised steels - Welding fumes class W3 - Articulated extraction arm 360° 3000 mm - Max. fan volume flow approx. 1600 m³/h - Max. static pressure 1800 Pa - Particulate Separator : Coarse Filter , Pre-Filter - Particle main separator : Main filter - Gas separators : Activated carbon filter - Drive - Fan 220 V / 1.10 kW - Space requirement approx. W 600 x H 900 / 2450 x D 600 mm - Weight approx. 80 kg - Operating hours read 43 h
weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 2,800 x 400 mm ... más información
Description: SPECIFICATIONS Chuck: Yes Diameter: ø2,500 mm Thickness: 230 mm No claws present: Yes Machine weight: 4,300 kgweight approx.: 4,300 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,500 x 230 mm ... más información