subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 108)
Sheet thickness: 1.25-15mm, laser power: 3500W, operating hours: 54,839h, with laser source ROFIN DC 035, without extraction unit and without software, if a nesting software is available it can be integrated, can also be from another manufacturer. ... mais informação
The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition. ... mais informação
Table dimensions: 2000x4000mm, max. stainless steel/ steel thickness: 20/ 25mmm, fuel: oxygen, propane, controls: CNC-801, with documentation and plasma power source Powermax 1650, the extraction needs overhauling. ... mais informação
X-travel: 2520mm, y-travel: 1550mm, z-travel: 300mm, max. sheet thickness: 12mm, max. workpiece weight: 330kg, cutting speed: 0-20m/min, controls: AMNC-F, connected load: 70kVA, weight: 7.5t, operating hours: 23,600h, with Resonator Fanuc AF 2000 E (LU 2.5), laser power: 2500W, laser wavelength: 10.6μm, with adaptive optics (Active Cut), sensor cutting head HS-2003, high-pressure cutting device (Clean Cut), aluminium cutting device (Alu Cut), focus point adjustment, gas pressure adjustment, resetting device, parts flap, extraction system, cooling unit, beam path rinsing and diode laser for positioning.
Max. workpiece dimensions: 1500x300mm, laser power: 3kW, max. load: 5t, operational hours counter: 5364h, with loading table, suction units for removing the sheets from the loading trolley, configuration ADL30-PMC30-TLE30 155C L5-30ASF, unloading trolley, enclosure, pallet storage rack, workbench, storage table, chip trolley and documentation, an inspection is possible, was maintained regularly.
Max. Laser power: 400W, operating hours: 28. 200h, with WinLas laser programming software, storage option for 99 laser programmes Optical setup for one laser light cable with fast switch (50ms switching time), optical setup can be extended to a maximum of 4 laser light cables, pilot laser with plasma sensor holder, Control of the pilot laser via laser operating software, beam guidance and shaping, LLK-B 06 laser light cable, length 40m, fibre diameter 600mm, suitable for robots, BEO 7000210p processing optics for laser welding, lens with focal length 200mm, Protective glass cassette for easy replacement of the protective glass, collimation 0° with defocussing and observation by camera, CCD camera, b/w monitor, adjustable crosshairs, camera supply cable, 30m long, and BNC video cable, 10m long, optics protection by Laval Crossjet, Design of the robot cell with suspended robot, KUKA KR 30 ...
With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. ... mais informação
Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. ... mais informação
Cutting area: 3000x1500mm, laser power: 2kW, operating/ cutting hours: 30,153/ 7594h, with automation ByTrans Extended 3015, second cassette, storage tower Bystronic ByTower, number of compartments: 11, on-site inspection is possible. ... mais informação
X-travel: 800mm, y-travel: 500mm, z-travel: 400mm, working height: 980mm, turntable diameter: 900mm, connected load: 12.5kW, control: Siemens Sinumerik 840D, length: 2710mm, width: 1815mm, height: 2645mm, weight: 1.86t, weight control cabinet: 300kg, with documentation, an on-site inspection is possible.
Electrode force: 900daN, length: 1500mm, width: 1200mm, height: 1800mm, weight: 720kg, on-site inspection is possible, with refrigeration unit, tools and documentation, has been regularly serviced. ... mais informação
Length: 1500mm, width: 1300mm, height: 1500mm, weight: 350kg, including electrodes and cooling unit, without documentation, an on-site inspection is possible. ... mais informação
Length: 1500mm, width: 1300mm, height: 1500mm, weight: 450kg, including electrodes and cooling unit, without documentation, on-site inspection is possible. ... mais informação
Welding capacity: 504kVA, connected load: 90-125kVA, weight: 588kg, without cooling unit, on-site inspection is possible. ... mais informação
Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. ... mais informação
X-axis: 2520mm, y-axis: 1550mm, z-axis: 300mm, max. sheet thickness: 12mm, control FANUC 160i-L, FANUC Laser C4000, Keller dry separator Vario T 1.5, cooling Riedel. The machine is fully functional and can be inspected on site during operation. ... mais informação
Welding rectifier: A10-355K, welding process: MIG/MAG, power connection: 3-phase, 220/380V, 50 Hz or 220V, 60 Hz, output range: 50A/15V to 355A/29V. Duty cycle: 355A/29V at 20%, 315A/30V at 60%, 280A/28V at 80%, 250A/27V at 100%. Open-circuit voltage: 17-39V, current at 220V: 41A at 50%, 34A at 60%. Current at 380V: 24A at 50%, 20A at 60%, weight: 175kg.
There are 5 welding machines available, some of which are defective. 1) EWM WEGA 400 MIG DW, defective: unknown. 2) MAHE c-MIG 5000 WWK, partially functional, ignition problems. 3) MAGE c-MIG 5000 WWK. 4) MAHE c-MIG 5000 WWK, defective: Error in display. 5) NIMAK CMK 400, all welding machines including water cooling, intermediate hose package and wire feed case. The welding machines are only sold as a package. Individual machines cannot be sold separately.
A used submerged arc welding system from Oerlikon is for sale, which was regularly serviced and fully functional until last year. The system is mounted on a crane rail and has a cross travel arm with a travel distance of 10 meters, which carries a 6.5 meter long boom that can be extended up to 5.5 meters. The system includes four power sources, each with 1,000 amps from Oerlikon/Miller, suitable for tandem welding with two quills, each with a travel distance of 2 meters. It is designed for welding wires with diameters of 2.4 mm, 3.2 mm and 4.0 mm. Although the unit is designed to be rotatable, it is currently stationary due to an attached trolley for welding consumables. Documentation available. On-site inspection is possible.
Fan capacity: 7500m³/h, pressure: 3000Pa, filter area: approx. 80m², rated current: 15.5A, motor power: 7.5kW. Dimensions X/Y/Z: approx. 800mm/800mm/2900mm, weight: 380kg. Documentation available. ... mais informação