subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 109)
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 60 mm external diameter max.: 80 mm wall thickness max.: 25 mmPRODUCT (PROFILE, TUBE) length min.: 400 mm lenght max.: 1000 mmELECTRICAL SPECIFICATIONS total power consumption: 95 kW mains power supply: 200 kVA mains voltage: 400 V mains frequency: 50 HzSystem consists of:+ VAI SEUTHE TM90-3.0 cut-to-length line, YoM 2002+ BÜLTMANN tube bundle loader incl. cut-off head , YoM 1990 + FELSS axial forming system, YoM 1997+ Hydromation unloading system, YoM 1997Cycle time approx. 20 sec.max. diameter reduction: 30 mm
CHARACTERISTICS HEAT TREATMENT EQUIPMENT heating method: electric temperature min.: 420 °C temperature max.: 930 °C throughput, capacity: 6000 kg/hThroughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg- Red tube storage racks next to the furnace not included
There are two identical eroding machines available, x-travel: 500mm, y-travel: 400mm, z-travel: 300mm, controls: ELOTRACE 3, operational hours counter: 56,600h. ... más información
X-travel: 520mm, z-travel: 800mm, turning table diameter: 800mm, length: 2440mm, width: 1150mm, height: 1760mm, weight: 1.3t, including tool cones and accessories, was maintained regularly. ... más información
Outer spring diameter: 5-16mm, wire thickness: 0.5-1.3mm, angle ratio: 6-18, max. throughput: 65/min, with documentation. ... más información
For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.
There are three identical machines available, year of construction machine 1/ 2/ 3: 1994/ 1996/ 1997. ... más información
X-travel: 300mm, y-travel: 150mm, z-travel: 200mm, table dimensions: 350x450mm, controls: EROPULS 2002, length: 1200mm, width: 1200mm, height: 2000mm, weight: 1.4t, including documentation, without magnet clamping plate. ... más información
There are two identical polishing machines available, with accessories and documentation. ... más información
Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. ... más información
Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but set up for torsion free multiple drawing with twin pulleys, with documentation and spare pulleys, has been regularly maintained.
Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. ... más información
Length: 8225mm, width: 3200mm, with documentation. ... más información
Workpiece dimensions: 140x180mm, load: 21kg, length: 9300mm, width: 3400mm, height: 3500mm. ... más información
Compressed air supply: 4-6bar, weight: 6000N, with documentation. ... más información
There are three AGIE CUT CNC 100 available, year of construction 1/2/3: 1980/1979/1979, with accessories, machine 1 and 2 are functional, machine 3 serves as a source for spare parts. ... más información
DMG Lasertec 20 + PH10 I 100 Lid Maho Mori Seiki PrecisionTool Hersteller [manufacturer]: DMG Mori Seiki DMG Deckel Maho + Linear Magazine Sauer Baujahr[construction year]: 10/2013 Type [ type]: LaserTec20 Control unit: Siemens 840D SolutionLine Incl. control panel handheld Fiber laser system 20 W YLP-C-1-100-20-20 Active Medium Ytterium Wavelength 1065 nm (1055 nm – 1075nm) Average power 100W Repittion rate 20kHz – 100kHz Pulse length 100 ns- 150 ns Travel Distances X-Axis: 200mm Travel distances Y-axis: 200mm Travel distances Z-axis: 280mm C-axis clamping surface: 190mm Rotation range C-axis: 360mm Rotation rotary table 150 rpm Weight approx.: 3.600kg Technical documentation/documents available in detail
grinding diameter:630 mmgrinding length:2000 mmcentre height:320 mmtable speed -stepless-:0,005-5 m/minmin/max. table longitudinal travel:5/ 3350 mmtable speeds:8 m/mingrinding spindle- cross travel:420 mmworkpiece-spindlehead motor:3,0 kWoutput of wheelhead motor:22 kWmotor internal grinding:3 kWlubrication pump motor:0,11 kWweight of the machine ca.:15700 kgdimensions of the machine ca.:H1970/B3100/L12650 mm40 % advance payment, by order confirmation60 % before loading the machinewarranty:12 monthone general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D.Our general overhauling includes:regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric including cabinet accordin ...
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kg ... más información