otras máquinas para el procesado de metales usadas para la venta

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...

SHUZ TUNG CNC 50 BRM CNC tube and profile bending machine built in 2014 in Taiwan allows for fully automatic, serial production of complex spatial workpieces in 5 axes with simultaneous hole punching. Excellent precision and accuracy of bending are guaranteed by the reliable servo motors used in the machine, which are responsible for realising the main working movements, i.e. bending, rotation and material feed. The rest of the movements are driven by a central hydraulic system with electronic lubrication. The SHUZ TUNG CNC mandrel bending machine is operated via a control panel with an installed CNC controller with the option of saving an unlimited number of programmes. In addition, the automatic servo bending machine is equipped with several bending rolls, a high-quality mandrel and an actuator to support material feed. The 50 BRM automatic CNC mandrel bending machine weighs 3500 kg ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a selector mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire selector mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance  ...

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

Scaffolding production line built in 2015 is designed for the efficient production of steel boards used in construction scaffolding. The sheet metal unrolled from the coil goes through a straightening machine and is then subjected to the relevant machining stages. At the beginning of the machining process, the appropriate side holes are punched and the sheet is perforated to ensure adequate slip resistance. In a further stage, the sheet goes through a rollforming line, which gives the final shape of the board. The installed software of the machine allows to choose from 8 different steel scaffolding board lengths ranging from 0.73 m to 3.07 m. A complete steel scaffolding boards production line with tooling performs the entire process fully automatically. The automated production line for construction scaffolding boards consists of the following components: – software – B&R PP41  ...

MACRI ITALIA PROVAR 5-90 U-D tube bending machine, built in Italy in 2010 is used for the fully automatic process of fixed radius and variable radius workpiece bending on two different dies. The machine is characterised by a highly rigid steel structure, modern components and extensive equipment. All 5 axes of the machine (X, Y, Z, B1, B2) are equipped with reliable brushless servomotors in order to provide the user with high dynamics and excellent positioning accuracy when machining tubes and profiles with a maximum length of 5100 mm. The installed state-of-the-art MACRI software allows, among others, to program the positioner force, perform an anti-collision test with 3D simulation, import files from 3D programmes and program the speed of movement of each axis for each bend. The PROVAR 5-90 U-D mandrel bending machine weighs 6000 kg. Technical specifications of the MACRI ITALIA PROV ...

LXSHOW LXW 2000 W FIBER laser cleaner manufactured by Chinese manufacturer LXSHOW Jinan Lingxiu Laser Equipment Co., Ltd. in 2022, is a widely used industrial device designed to remove e.g. rust, paint, oil and oxide layers from the surface of workpieces. The use of the laser cleaner guarantees the removal of contaminants without any damage to the surface and achieves exceptional cleanliness, impossible to achieve with conventional workpiece cleaning. Laser cleaning is performed without the use of chemicals or cleaning solutions, making the fiber laser cleaner environmentally friendly. At the end of the process, the waste takes the form of a solid powder, easy to store and recycle. The LXSHOW fiber laser offered together with the reliable 2 kW RAYCUS RFL-C2000 generator ensures long-lasting, uninterrupted and highly efficient performance at a low cost of operation. The LXSHOW LXW20 ...

AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...

FRANCE ETUVES XXL01 industrial furnace was manufactured in 2013. The furnace used in curing, polymerisation, coating, heating and drying of workpieces has a structure made of high quality steel with a 1000 litre capacity utility chamber. A large opening door allows for quick and easy loading of workpieces without weight limit into the chamber. The air from the top of the furnace is drawn in, heated to 200°C and blown out from the rear of the chamber onto the workpieces via an efficient ventilation system. All of the furnace’s heating elements are ideally positioned in the airflow, guaranteeing fast and efficient heating. In the case of a malfunction, the fan and the heating process are automatically stopped. The machine is equipped with a PID control C3000 with functions such as real-time temperature display, start delay and cycle repeat. The total weight of the furnace is 500 kg.  ...

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

ZREMB GH4 tube bending machine, manufactured in 1983, is used in factories during the precise processing of all varieties of installation tubes. The tube bending is performed in a semi-automatic mode on a cam with the mandrel filling the most deformed section of the tube. The machine comes with a comprehensive range of equipment shown in the accompanying photos. The GH4 mandrel bending machine weighs 2450 kg. The ZREMB tube bending machine consists of: – drive mechanism – mandrel feed mechanism – guiding mechanism – control panel mechanism – hydraulic system – electrical installation assembly – frame assembly Technical specification of the ZREMB GH4 bending machine - tube diameters: 1 ½”; 2″, 2 ½”; 3″, 3 ½”; 4″ - maximum bending angle: 180° - bending capacity (30 bends): 180°/h - head working movement time (180°): 38 s - head return movem ...

DEA GLOBAL S 07.05.05 coordinate measuring machine was manufactured in Italy in 2004. The machine performs fast and highly accurate measurements of workpieces with complex shapes using the contact or non-contact method, represented as a set of coordinate points. The excellent quality and precision of the process is guaranteed thanks to the mounted in the DEA GLOBAL S 07 05 05 CMM machine an indexable RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, performing measurements in the X,Y,Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The DEA GLOBAL Status 07.05.05 measuring machine is also equipped with the highly advanced metrology software PC-DMIS 2019 R1, performing detailed geometric measurements. Technical specifications of the DEA GLOBAL S 07.05.05 measuring machine - maximum permissible error of length measurement MPEe: ± 2.3 + 3L/10 ...

DEA SCIROCCO 151310 coordinate measuring machine built in 1997 in Italy, is used to make fast and highly accurate measurements of workpieces with complex shapes. Workpiece measurements are taken using contact or non-contact methods, which are then represented as a set of point coordinates. The dimensions of the measured workpiece are taken using the RENISHAW TP7M measuring probe, which is installed on the RENISHAW PH10MQ indexing head. The measuring probe uses strain gauge technology to eliminate granularity errors and achieve the highest measurement quality in the X,Y,Z axes with feeds of 1500 mm (X axis), 1300 mm (Y axis) and 1000 mm (Z axis). The measuring machine is offered with a wide range of equipment, including an advanced PC-DMIS package for Windows, performing detailed geometric measurements. The total weight of the machine is 3650 kg. Technical data of the DEA SCIROCC ...