outras máquinas para trabalhar o metal usadas para venda

measuring range X-axis:150-300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmtool diameter: mmtool taper: SKcompressed air: bardimensions: mmachine weight ab.: kgclamping surface upper angle: Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer

grinding length:650 mmgrinding width:450 mmworkpiece height:425 (ohne Magnetplatte) mmmax. workpiece weight:600 kgweight of the machine ca.:3,8 ttotal power requirement:15 kWmachine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 mUsed/reconditioned surface grinding machine, make GER, type RSA-650.Automatic infeed in all 3 axes.Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked.OVERHAUL SCOPE:Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ.All guideways newly scraped in new machine geometry.Wear parts replaced, defective components repaired or replaced.Reassembly, complete functional test and internal acceptance. Machine repainted.Machine in perfect condition, ready for production.MEASURED GEOMETRIC ACCURACIES:Actual geometric accuracy after  ...

grinding length:9000 mmgrinding width:2000 mmworkpiece height:1500 (ca.) mmmax. workpiece weight:90 ttable surface area:9500x2240 mmtable speeds:1-40 m/mindistance between columns:2680 mmweight of the machine ca.:170 tdimensions of the machine ca.:25500x9990x6350 mmMotor output:50 kWUsed guideway grinder, make Waldrich, Type 30-15 SPS 4025 / 4m.Warranty: No

turning diameter:630 mmturning length:2850 mmcontrol:Fanuc 0i-mate MGI swing diameter over slide rest:350 mmbed width:550 mmspindle nose:D11/1:20 spindle bore:104 mmspindle speeds::17-1000 U/mintransmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/mintailstock quill taper MT:5 MorseQuill travel:200 mmdiameter of quill:100 mmworkpiece accuracy:6-7 ITFx-travel:320 mmz travel:3000 mmchuck size:315 mmdimensions:5200 x 1900 x 1900 mm:6 tpower capacity:11 kWCNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 steady rest:2 Stückfrequency control main spindel engine:11 kWturret:8-fach Flat Bed CNC LatheFlat Bed CNC Lathe, CAK63/80 SeriesCAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petroleum, military, among ...

grinding diameter:3 - 150 mmgrinding length:200 mmtotal power requirement:380V, 50Hz, 30 kWdimensions of the machine ca.:5 x 3 x 2,5 m ... mais informação

grinding diameter: 0,2 - 190 mmgrinding length:400 mmcentre height:100 mmweight of the machine ca.:1,6 tdimensions of the machine ca.:2 x 1,5 x 1,8 m ... mais informação

honing diameter:90 mmstroke:600 mmConRod ... mais informação

indexing:Länge =< 1050 mmtable::Teilungslänge = ... mais informação

faceplate diameter:4000 mmswing diameter:4300 mmturning height:2500 mmmax. workpiece weight:63 ttotal power requirement:125 kWweight of the machine ca.:134 tdimensions:6100x10400x8400 mmUsed Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

 ... mais informação

grinding length:850/1000 mmgrinding width:375 mmworkpiece height:375 mmClamping area:1550x370 mmtotal power requirement:9 kWspace requirements approx. LxWxH:4,80 x 2,25 x 2,40 mTotal weight, approx.:4300 kgmax. workpiece weight:350 kgUsed Surface grinding machine, manufactured EFA type AMBASSADOR 4/2 VA IZ, Baujar 1975Machine with automatic feed in all 3 axes.Machine cleaned and tested by qualified technician Functionality tested.Surface grinding machine in perfect condition, ready for production.Accessories:- Electric - magnetic - table size 400x200mm, with a straight pole- demagnetising devise- wheel dresser mounted laterally on the grinding wheel, manually operated- wet grinding- 1 piece grinding wheel flange- 1 set of machine set up devises- Technical documentation in German- With diaform - deviceFor more information, see the Appendix.Payment: 100% before loading the machineWarranty: ...

number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW ... mais informação

x-travel:400 mmy-travel:300 mmz-travel:500 mmtable clamping surface::400 x 300 mmtable load:50 kgsemi-automatic operated:LASERSOFT 3D laser capacity:100 Wtotal power requirement:27 kVAweight of the machine ca.:2,5 tdimensions of the machine ca.:3 x 3,5 x 2,8 mCNC engraving/texturing/labeling/contouring-laser maschine,approx. 9.000h "machine on", approx. 5.500h "laser on"

x-travel:800 mmy-travel:500 mmz-travel:420 mmtotal power requirement:7,5 kWweight of the machine ca.:3 tdimensions of the machine ca.:3,5x3x2,2 m ... mais informação

honing diameter:41 mmstroke:800 mmweight:15.000 kgfloor space required (w/o switchgear cabinet):4x2x5 mnumber of spindles:2 Vertical honing machine from current OEM lineBore honing machine from wheel production Honing diameter: 41mm serial part4 layer honing tool Machine condition: o used and intact; fully functional; Serial system ratchet wheel 4 o Parts quality OK o 2 spindle vertical honing machine o 4-layer honing tool - Piece counter: 960,000 - The machine was used in three-shift operation Overview of accessories: o Control panel o Tool/ clamping device o oil panso Decentralized coolant system (2.5x1.5x1m), hydraulic unit (1.5x1x1m) & control cabinet

workpiece diameter:360 mmcentre distance:600 mmturning speed range - stepless:2 - 1.550 U/minpower feed longitudinal:14 to.power feed coss:11,7 to.transmission ratio:2 tailstock travel:800 mmpower maindrive:33 kW:160 kVAweight of the machine ca.:17 tprecision flow-forming machine with 2 rolls,slides with 2 roller under 90°,central lubrication,max. round blank dia. 380mm,bed length 3.670mmm,mainspindle speeds infinitely variable,hydr. roller drive, swivellable roller bearings,coolant device 800 l,only approx. 4.300 working hours

grinding diameter:630 mmgrinding length:2000 mmcentre height:320 mmmax. workpiece weight:2500 kgswing diameter in open bench rest:40-150 mmtaper in tailstock:6 MKtable swivelabel +/-:6°30' °work piece spindle speed:8-50, 50-315 (2 Bereiche) U/mingrinding wheel speed:33 m/secoutput of wheelhead motor:15 kWworkpiece-spindlehead motor:3,0 kWtotal power requirement:31 kWweight of the machine ca.:12400 kgopen type steady rest:2 (schwer) Stücksteady fixed:2 Stückgrinding wheel flange:2 Stücktechnical documentation:in deutscher Sprache 40 % advance payment, by order confirmation60 % before loading the machinewarranty:12 monthone general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D.Our general overhauling includes:regrinding and scraping of all guide ways in ...

Sulzer METCO Plasma Coating Plant for cylinder block and cylinder head, YOM 2002New price: ? 16-20 mio ... mais informação

grinding diameter:630 mmgrinding length:5000 mmcentre height:315 mmgrinding wheel diameter x bore x width:750x80x305 mmgrinding wheel peripheral speeds::35 m/secgrinding wheel speeds:500-1100 U/minmax. workpiece weight:3000 kgweight of the machine ca.:17900 kgmachine length:im Betrieb: ca. 15m  ... mais informação

diameter:500 mmworkpiece weight:30 kgtest dia. min.:200 mmtotal power requirement:0,03 kWweight of the machine ca.:1000 kgdimensions of the machine ca.:1x0,5x1,06 m ... mais informação