outras máquinas para trabalhar o metal usadas para venda

Description: Stock number : EX690Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,225 mm, weight approx.: 1,500 kg ... mais informação

Description: Maximum part dimensions: 650 x 160 x 420 mm - Maximum part weight: 350 kg - Axis travel: X=320 - Y=110 - U=120 - v=120 - Z=180 mm - Weight of the machine: approximately : 1900 kg Equipped with : 1 CN FANUC Series 16- w number of production hours: 25 205 hx-motion: 320 mm, y-motion: 110 mm, z-motion: 180 mm, control: CN FANUC Series 16- w, table surface area l x w : 650 x 160 x 420 mm, weight approx.: 2,400 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 2,200 mm

Description: Chager Electric semi stacker. Load capacity: 2000kg. Lift height:1600mm. Load center distance:500mm. Fork ,minimum ,clearance ,from ,the ,ground:40mm. Turning ,radius:1425mm. Minimum ,channel ,requirement:2305mm. Total ,length:1735mm. Total ,body ,width: 800mm. Fork ,width:320-1000mm. Fork ,size ,(hammered):110016050mm. Lifting ,speed ,(full ,load ,/ ,no ,load)  ,(m ,/ ,s) 0.08/0.1. Driving ,speed ,(full ,load ,/ ,no ,load)  ,(km ,/ ,h) 4.5/5.5. Falling speed(full load/no load) (m/s) 0.12/0.15. Tire:Nylon. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 1,735 x 800 x 2,100 mm, weight approx.: 500 kg

Description: Load capacity:1000kg. Lift height:1600mm. Load center distance:500mm. Fork ,minimum ,clearance ,from ,the ,ground:40mm. Turning ,radius:1425mm. Minimum ,channel ,requirement:2305mm. Total ,length:1735mm. Total ,body ,width: 800mm. Fork ,width:320-1000mm. Fork ,size ,(hammered):110016050mm. Lifting ,speed ,(full ,load/no ,load) ,(m/s) 0.08/0.1. Driving ,speed ,(full ,load/no ,load) ,(km/h) 4.5/5.5. Falling speed(full load/no load) (m/s) 0.12/0.15. Tire:Nylon. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 1,735 x 800 x 2,100 mm, weight approx.: 500 kg

Description: Screw Air Compressor 30kW. Current：40HP/30kW (Y-Delta Start). Flow Rate:5m3/min (176CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G1. Lubricant Oil: 15Liter. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 960 x 1,400 x 1,300 mm, weight approx.: 528 kg

Description: Power 1.5 kW, water cooling, wavelength 1070 nm, cleaning width 50 mm, power supply 220 V. 1. Metal surface rust removal/carbon steel rust removal/weld seam cleaning/metal surface paint removal/steel pipe paint removal/aluminum plate surface cleaning oxide film, , 2. Laser cleaning technology refers to the use of high-frequency high-energy laser pulses to irradiate the surface of the workpiece, The coating layer can instantly absorb the focused laser energy, causing the surface oil stains, rust spots or coatings to evaporate or peel off instantly. It is a high-speed and effective cleaning method for removing surface attachments or surface coatings, and the laser pulse with a short action time, Will not harm metal substrates under proper parameters. Laser cleaning is a new technology based on the interaction effect between laser and matter. Different from traditional mech ...

Description: Screw Air Compressor 22kW. Current：30HP/22kW( Y-Delta Start). Flow Rate:3.3 m3/min (116CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G1. Lubricant Oil: 15Liter. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 960 x 1,400 x 1,300 mm, weight approx.: 460 kg

Description: Rated load :1500kg. Load centre distance:500mm. Lift height:1600mm. Total height when lowered:2080mm. Max height after lifting:2080mm. Handle height form the ground:1200mm. Wheel:pu. Drive wheel size:ф210×80mm. Balance wheel size:ф100×55mm. Load wheel size:ф80×680mm. Total length(pedal no open):2070mm. Total width:800mm. Fork size（plank press):60x170x1100mm. Turning radius:1600mm. Lifting speed(no load/full load):0.08/0.1m/s. Falling speed(full load):0.15/0.12m/s. Drive speed(full load/no load):4.5/5km/h. Climbing ability(no load/full load):5/15%. Lift motor:2.2kW. Drive motor:1.2kW. Battery :24V/80Ah x1 The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 780 x 1,840 x 2,080 mm, weight approx.: 500 kg

max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5  ... mais informação

Description: Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 830 x 1,300 x 1,200 mm, weight approx.: 339 kg

Description: Screw Air Compressor 11kW. Current：15HP /11kW ( Y-Delta Start). Flow Rate:1.6 m3/min (56CFM) Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 830 x 1,300 x 1,200 mm, weight approx.: 320 kg

:VL 700A | VL 1100A | VL 1100D x-travel:700|1100|1100 mmy-travel:420|600|600 mmz-travel:500|600|600 mmtable-size:800x420|1280x600|1280x600 mmmax. table load:500|1000|1000 kgdistance spindle center to column:480|630|630 mmdistance spindle center to table:100-600|100-700|60-660 mmrapid traverse in x-y-z axis:40/40/32|36/36/30|36/36/30 mmilling feed range:1-10.000 mm/min:10.000|10.000|6000 1/min (direkt)spindle drive:11/16,5|11/20,4 kWpositioning accuracy:+/- 0,010 mmrepeating accuracy:+/- 0,008 mmtool taper:40|40|50 BT/SKmax. tool diameter:80/130|80/130|110/220 mmmax. tool weight:8|8|20 kgmax. tool length:300|300|350 mmdimensions:4215x3230x2700|4200x3510x2850|4200x3510x2850 mmweight of the machine ca.:4,5|7,25|7,5 tCNC controls from:Fanuc tool measuring system:von BLUM workpiece measurement system:von BLUM Brand-new CNC vertical machining center with CNC control Siemens 828D with Shopmil ...

Description: Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 750 x 980 x 1,010 mm, weight approx.: 206 kg

:VL 1400 | VL 1600 x-travel:1.400|1.600 mmy-travel:760 mmz-travel:760 mmtable-size:1.600x760|1800x760 mmmax. table load:1.200|1.500 kgT-slot (width-distance-quantity):18x125x5 mmdistance spindle center to column:780 mmdistance spindle center to table:150-910 (opt.100-860) mmrapid traverse in x-y-z axis:20/20/20 mmilling feed range:1-10.000 mm/min:10.000 (opt. 6000) 1/minspindle drive:11/20,4 (opt. 15/20,4) kWpositioning accuracy:+/- 0,012 mmrepeating accuracy:+/- 0,010 mmtool taper:40 (opt. 50) SK/BTmax. tool weight:8 (opt. 20) kgtool length:300 (opt. 350) mmTool diameter:80/150 (opt. 110/200 (angrenzend leer)) mmdimensions:4500x4300x3350 mmweight of the machine ca.:12|13,5 ttotal power requirement:40 kVACNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:Blum workpiece measurement system:Blum Brand-new CNC vertical machining center with CNC control Siemens 828D with Shopmil ...

Description: Specialize in grinding screw tap. It's precise, easy operation and efficient, also can save large sum of expense for purchasing blade annually. With diamond wheel, can be secondary re-used, with accurate angle and long service life. The electrical controlled high-rate DC motor features stable power, strong horsepower, efficient and long service life. Patent product can grind all the front cutting face, also include the front cutting lip. M20 tap shank is within 14 for grinding. Point Angle:5°~30°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS), Standard collets:Φ5,Φ7,Φ8,Φ9,Φ13,Φ14 The item that is delivered is NOT the one shown in the pictures, but an equal oneweight approx.: 16 kg, Approx. Onsite Dimension. (l x w x h): 360 x 270 x 310 mm

plate thickness: mmsheet width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m ... mais informação

Description: Electronic Floor scale, 1200 x 1200 mm, maximum weight 3000 kg, piece counter function. Sturdy platform with reinforced structure and 4 load sensors. Very strong platform for weighing a large variety of objects. Made of waterproof epoxy painted steel and resistant to bumps and scratches. Adjustable feet to level the platform and transmit the force of the load sensors. CE certification. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 1,200 x 1,200 x 300 mm, weight approx.: 95 kg

length:1000 mmwidth:800 mmheight:1050 mmweight:200 kgSchubladenschrank mit 5 AuszügenMit AMF Spannsystem Elementen ... mais informação

 ... mais informação

weight of the machine ca.:11,2 tone spindle ... mais informação