subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 109)
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 60 mm external diameter max.: 80 mm wall thickness max.: 25 mmPRODUCT (PROFILE, TUBE) length min.: 400 mm lenght max.: 1000 mmELECTRICAL SPECIFICATIONS total power consumption: 95 kW mains power supply: 200 kVA mains voltage: 400 V mains frequency: 50 HzSystem consists of:+ VAI SEUTHE TM90-3.0 cut-to-length line, YoM 2002+ BÜLTMANN tube bundle loader incl. cut-off head , YoM 1990 + FELSS axial forming system, YoM 1997+ Hydromation unloading system, YoM 1997Cycle time approx. 20 sec.max. diameter reduction: 30 mm
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 40 mm external diameter max.: 150 mm length min.: 260 mm lenght max.: 1500 mmELECTRICAL SPECIFICATIONS total power consumption: 155 kW mains power supply: 280 kVA mains voltage: 400 V mains frequency: 50 HzSystem consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007Exclusions from supply (even if visible on photos)- without chip breaker- without laser marking system
CONTROLS PLC SIEMENS S5 FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 38 mm wall thickness min.: 2 mm wall thickness max.: 4 mm length min.: 52 mm lenght max.: 200 mmSystem consists of:+ BÜHLMANN (system construction), YoM 1997+ BACHMANN ABB robot cell, YoM 2014+ BROTHER TC-S2DN-0 CNC machining center, YoM 2012
FEEDSTOCK TUBE length min.: 4000 mm lenght max.: 12000 mmMACHINE CHARACTERISTICS SWAGING force: 2000 kN stroke rate (max.): 740 /minPRODUCT (PROFILE, TUBE) external diameter min.: 30 mm external diameter max.: 127 mm wall thickness min.: 1.5 mm wall thickness max.: 11 mm length min.: 4000 mm lenght max.: 12000 mmcomplete line including hammer and tube handlinghammering length: 180-300 mmhammering time: approx. 15 secondstotal hammering time: approx. 21 seconds (incl. loading and unloading)production capacity: approx. 170 pcs/hinclusive:+ pipe adjustage GFU ZS-2000 kN+ various GFU hammer jaws (30-110 mm)
Precision air chuck Ø240mm (Type 9-500-6QC)Technology: APCRepeatability approx. 0.0015Jaw stroke 12mmconcentricity: approx. 0.005 mmbase jaw DRM 134-182mm- as new unused air chuckEquipment:- Jaw Ø 174 - 182mmUse of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact.
Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled. ... mais informação
A Ringler suction system with 2 Ringler motors is available. On-site inspection is possible. ... mais informação
There are three identical machines available, year of construction machine 1/ 2/ 3: 1994/ 1996/ 1997. ... mais informação
Max. hydraulic pressure: 200bar, hydraulic oil capacity: 400l, length: 2000mm, width: 1500mm, height: 1000mm, with operating instructions, wiring diagram and installation instructions, on-site inspection is possible. ... mais informação
There are two identical eroding machines available, x-travel: 500mm, y-travel: 400mm, z-travel: 300mm, controls: ELOTRACE 3, operational hours counter: 56,600h. ... mais informação
Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. ... mais informação
Max. load: 800kg, weight: 2.55t, the machine needs overhauling, the generator is defective, an inspection is possible. ... mais informação
Inner dimensions: 2100x1200x1800mm, temperature: 30-300°C, heating power: 45kW, motor power: 3kW, length: 2750mm, width: 1900mm, height: 2600mm, with documentation, can be opened from both sides, an inspection is possible. ... mais informação
Length: 1000mm, width: 1200mm, height: 2500mm, the machine has not been run for some time, an inspection is possible. ... mais informação
Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.
Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.
Max. operating temperature: 200°C, usable space: 4.42m³, steam room volume: 5.6m³, volume flow: 9.87m³/min, heating output: 30kW, nominal output: 32.2kW. ... mais informação
X-travel: 250mm, y-travel: 160mm, table dimensions: 420x250mm, max. workpiece height: 160mm, max. workpiece weight: 120kg, length: 1545mm, width: 1240mm, height: 1065mm, weight: 540kg, with documentation, the machine should be overhauled, an inspection is possible. ... mais informação
Connected load: 6.2kVA, weight: 325kg, with Head AGIE TESTA-10, weight: 120kg, the machine should be overhauled, an inspection is possible. ... mais informação